gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-28 07:23:17 +00:00
Code Issues Projects Releases Wiki Activity

Update readme and protocol detals with surface/air info (#1034)

Browse Source 
* Update readme and protocol detals with surface/air info

* Update Protocols_Details.md

* Update README.md

---------

Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
This commit is contained in:
Paul
2025-01-19 05:18:20 -08:00
committed by GitHub
parent 95746f80a1
commit 50c18311c9
2 changed files with 3 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@@ -100,9 +100,9 @@ For example, if you have no interest in binding your Tx to an model with and FrS
## **Choice 3:** Which protocols to upload to the MULTI-Module
In the case of the ATmega328, the memory required by all the possible protocols exceeds the 32KB flash limit considerably. This means that you will need to make a choice of which protocols you will compile into your firmware. Fortunately, the process of selecting and compiling is not too difficult and it is fully documented on the [Compiling and Programming](docs/Compiling.md) page.
As the list of supported protocols grows even the STM32 ARM microcontroller cannot hold all of the protocols. You can select the protocols you need and complie your own firmware. Fortunately, the process of selecting and compiling is not too difficult and it is fully documented on the [Compiling and Programming](docs/Compiling.md) page. You can also download firmware from the [Multi-Module](https://downloads.multi-module.org) website. These firmware files have been split into two groups, surface "SFC" and air "AIR". You can check which protocols are included in each of these groups in the [Validate.h](Multiprotocol/Validate.h) source file.
An alternative is to use a STM32 ARM microcontroller based module which can hold all the protocols.
In the case of the ATmega328, the memory required by all the possible protocols exceeds the 32KB flash limit considerably. This means that you will need to make a choice of which protocols you will compile into your firmware.
## **Choice 4:** Choosing the type of interface between the MULTI-Module and your radio (PPM or Serial)