gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-13 19:43:44 +00:00
Code Issues Projects Releases Wiki Activity

OMP: doc update

Browse Source
This commit is contained in:
Pascal Langer 2020-09-23 23:52:22 +02:00
parent 4f89721cd0
commit 4f8da64822
1 changed files with 3 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
Protocols_Details.md
View File

@ -556,11 +556,10 @@ You should definitively upgrade your receivers/sensors to the latest firmware ve
Model: OMPHOBBY M2 Heli, T720 RC Glider Model: OMPHOBBY M2 Heli, T720 RC Glider
Telemetry supported: Telemetry supported:
- A1 = battery voltage including "recovered" battery voltage from bad telemetry packets - A1 = battery voltage including "recovered" battery voltage from corrupted telemetry packets
- A2 = battery voltage from only good packets - A2 = battery voltage from only good packets
- You must adjust the offset with a voltmeter since there are some large differences between the models - You must adjust the battery voltage offset with a voltmeter since there are some large differences between the models
- RX_RSSI = TQly = percentage of received telemetry packets (good and bad) received from the model which has nothing to do with well the RX is receiving the TX - RX_RSSI = TQly = percentage of received telemetry packets (good and corrupted) received from the model which has nothing to do with how well the RX is receiving the TX
- Telemetry is using the NRF24L01 RF component @250K so depending on your module it might not work so well
Option for this protocol corresponds to the CC2500 fine frequency tuning. This value is different for each Module and **must** be accurate otherwise the link will not be stable. Option for this protocol corresponds to the CC2500 fine frequency tuning. This value is different for each Module and **must** be accurate otherwise the link will not be stable.
Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it.