From 4f8da64822bdc67e3a8f68c2dd6eea2d4eb3c502 Mon Sep 17 00:00:00 2001 From: Pascal Langer Date: Wed, 23 Sep 2020 23:52:22 +0200 Subject: [PATCH] OMP: doc update --- Protocols_Details.md | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/Protocols_Details.md b/Protocols_Details.md index 49651e9..50d21ef 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -556,11 +556,10 @@ You should definitively upgrade your receivers/sensors to the latest firmware ve Model: OMPHOBBY M2 Heli, T720 RC Glider Telemetry supported: -- A1 = battery voltage including "recovered" battery voltage from bad telemetry packets +- A1 = battery voltage including "recovered" battery voltage from corrupted telemetry packets - A2 = battery voltage from only good packets -- You must adjust the offset with a voltmeter since there are some large differences between the models -- RX_RSSI = TQly = percentage of received telemetry packets (good and bad) received from the model which has nothing to do with well the RX is receiving the TX -- Telemetry is using the NRF24L01 RF component @250K so depending on your module it might not work so well +- You must adjust the battery voltage offset with a voltmeter since there are some large differences between the models +- RX_RSSI = TQly = percentage of received telemetry packets (good and corrupted) received from the model which has nothing to do with how well the RX is receiving the TX Option for this protocol corresponds to the CC2500 fine frequency tuning. This value is different for each Module and **must** be accurate otherwise the link will not be stable. Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it.