gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 01:57:52 +00:00
Code Issues Projects Releases Wiki Activity

Few comments tweak

Browse Source
This commit is contained in:
pascallanger 2017-01-31 09:12:06 +01:00
parent e85208110f
commit 4f5dfcc65b
2 changed files with 6 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Multiprotocol/Multiprotocol.h
View File

@ -573,7 +573,7 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Power value => 0x80 0=High/1=Low
Stream[3] = option_protocol;
option_protocol value is -127..127
option_protocol value is -128..127
Stream[4] to [25] = Channels
16 Channels on 11 bits (0..2047)
0 -125%

9
Multiprotocol/_Config.h
View File

@ -121,13 +121,14 @@
#define INVERT_TELEMETRY
//Comment if you don't want to send Multi status telemetry frames (Protocol available, Bind in progress, version...)
//Use with er9x/erksy9x, for OpenTX MULTI_TELEMETRY below is preferred instead
#define MULTI_STATUS
//Uncomment to send Multi status and wrap other telemetry to allow TX to autodetect the format
//Only for newest OpenTX version, not supported by er9x/ersky9x
//Uncomment to send Multi status and allow OpenTX to autodetect the telemetry format
//Supported by OpenTX version 2.2 RC9 and newer. NOT supported by er9x/ersky9x use MULTI_STATUS instead.
//#define MULTI_TELEMETRY
//Comment a line to disable a protocol telemetry
//Comment a line to disable a specific protocol telemetry
#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
#define SPORT_TELEMETRY // Use FrSkyX SPORT format to send telemetry to TX
#define AFHDS2A_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
@ -329,5 +330,5 @@ const PPM_Parameters PPM_prot[15]= {
// As an example, it's usefull for the WLTOYS F929/F939/F949/F959 (all using the Flysky protocol) which requires a bind at each power up.
// It also enables the Bind from channel feature, allowing to execute a bind by toggling a designated channel.
// Option: the value is between -127 and +127.
// Option: the value is between -128 and +127.
// The option value is only valid for some protocols, read this page for more information: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md