gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2026-01-13 04:03:15 +00:00
Code Issues Projects Releases Wiki Activity

Move Arduino IDE boards doc to /doc (#139)

Browse Source 
* Create Arduino_IDE_Boards.md
* Update README.md
* Update links to Arduino IDE board instructions (#138)
This commit is contained in:
Ben Lye
2018-01-09 08:06:17 +00:00
committed by GitHub
parent cd235bbcde
commit 499e854275
5 changed files with 54 additions and 54 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Compiling_STM32.md
View File

@@ -55,7 +55,7 @@ The 4-pin header needs to be soldered onto the board as indicated by the red rec
1. Double-click the **Multiprotocol.ino** file in the **Multiprotocol** folder to open the project in the Arduino IDE
### Install the Multi 4-in-1 board
1. Follow [these instructions](/BootLoaders/README.md) to install the **Multi 4-in-1 STM32 Board** in the Arduino IDE
1. Follow [these instructions](Arduino_IDE_Boards.md) to install the **Multi 4-in-1 STM32 Board** in the Arduino IDE
### Configure the Arduino IDE
1. Under **Tools -> Board** select **Multi 4-in-1 (STM32FC103)**
@@ -199,7 +199,7 @@ In order for these devices to be correctly identified in Windows it is necessary
**NOTE:** If you have installed the drivers and your module is not detected as a Maple device it most likely does not have a USB bootloader installed. Ready-made modules from Banggood **do not** come with a USB bootloader installed. You will need to follow the procedure to [Burn a USB bootloader](#burn-the-bootloader) before you can upload firmware.
### Upload the firmware via USB
**Note:** Power to the module will be supplied via the USB cable. If the module is installed in a transmitter, the transmitter should be switched off.
**Note:** Some modules require external power in order for the USB port to work. If your module does not power on with USB power alone, install it in the transmitter and switch the transmitter on. It is generally safe for the module to recieve power from both USB and the transmitter.
1. Connect the USB cable to the Multiprotocol module
1. Verify that a Maple device appears in Device Manager (**Maple DFU** for a module with only a bootloader, **Maple Serial** for a module with a bootloader and firmware)
@@ -240,8 +240,6 @@ For subsequent firmware uploads you need only repeat steps 1-3 above, ensuring t
<p align="center"><img src="images/maple-serial-port-select.jpg"/></p>
If the module is installed in a transmitter, disconnect the USB cable before powering on the transmitter.
## Upload via Serial
Upload via Serial follows the same process as burning the bootloader and uses the same USB-to-TTL adapter.