gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-03 03:57:51 +00:00
Code Issues Projects Releases Wiki Activity

Keep up to date

Browse Source
This commit is contained in:
midelic 2016-09-03 13:00:53 +01:00 committed by GitHub
parent e62d6525e2
commit 487efa9e3e
1 changed files with 58 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

65
Multiprotocol/Multiprotocol_STM32.h.bak
View File

@ -41,6 +41,11 @@ enum PROTOCOLS
MODE_SHENQI=19, // =>NRF24L01
MODE_FY326=20, // =>NRF24L01
MODE_SFHSS=21 // =>CC2500
MODE_J6PRO=22, // =>CYRF6936
MODE_FQ777=23, // =>NRF24L01
MODE_ASSAN=24, // =>NRF24L01
MODE_FRSKY1 = 25 // =>CC2500
};
enum Flysky
@ -98,7 +103,8 @@ enum MT99XX
{
MT99 = 0,
H7 = 1,
YZ = 2
YZ = 2,
LS = 3
};
enum MJXQ
{
@ -120,13 +126,30 @@ enum FRSKYX
#define AUTOBIND 1
#define NO_AUTOBIND 0
struct PPM_Parameters
{
uint8_t protocol : 5;
uint8_t sub_proto : 3;
uint8_t rx_num : 4;
uint8_t power : 1;
uint8_t autobind : 1;
uint8_t option;
};
//*******************
//*** Pinouts ***
//*******************
#if defined STM32_board
#define OCR1A TIMER2_BASE->CCR1
#define TCNT1 TIMER2_BASE->CNT
#define TIFR1 TIMER2_BASE->SR
#define OCF1A_bm TIMER_SR_CC1IF
#define UDR0 USART2_BASE->DR
#define UCSR0B USART2_BASE->CR1
#define RXCIE0 USART_CR1_RXNEIE_BIT
#define TXCIE0 USART_CR1_TXEIE_BIT
#define digitalHi(p, i) gpio_write_bit(p, PIN_MAP[i].gpio_bit, HIGH)
#define digitallo(p, i) gpio_write_bit(p, PIN_MAP[i].gpio_bit, LOW)
#define digitalIn(p, i) gpio_read_bit(p,PIN_MAP[i].gpio_bit)
@ -172,6 +195,9 @@ enum FRSKYX
#define CS_on digitalHi(GPIOB,CS_pin)
#define CS_off digitallo(GPIOB,CS_pin)
#define NRF_CE_on
#define NRF_CE_off
#define SCK_on digitalHi(GPIOB,SCK_pin)
#define SCK_off digitallo(GPIOB,SCK_pin)
@ -209,6 +235,7 @@ enum FRSKYX
#define cli() noInterrupts()
#define sei() interrupts()
#define _delay_us(x) delayMicroseconds(x)
#define delayMilliseconds(x) delay(x)
//
#endif
@ -257,6 +284,31 @@ enum FRSKYX
#define BAD_PROTO_on protocol_flags2 |= _BV(0)
#define IS_BAD_PROTO_on ( ( protocol_flags2 & _BV(0) ) !=0 )
#define RX_DONOTUPDTAE_off protocol_flags2 &= ~_BV(1)
#define RX_DONOTUPDTAE_on protocol_flags2 |= _BV(1)
#define IS_RX_DONOTUPDTAE_on ( ( protocol_flags2 & _BV(1) ) !=0 )
#define RX_MISSED_BUFF_off protocol_flags2 &= ~_BV(2)
#define RX_MISSED_BUFF_on protocol_flags2 |= _BV(2)
#define IS_RX_MISSED_BUFF_on ( ( protocol_flags2 & _BV(2) ) !=0 )
#define TX_MAIN_PAUSE_off protocol_flags2 &= ~_BV(3)
#define TX_MAIN_PAUSE_on protocol_flags2 |= _BV(3)
#define IS_TX_MAIN_PAUSE_on ( ( protocol_flags2 & _BV(3) ) !=0 )
#define TX_RX_PAUSE_off protocol_flags2 &= ~_BV(4)
#define TX_RX_PAUSE_on protocol_flags2 |= _BV(4)
#define IS_TX_RX_PAUSE_on ( ( protocol_flags2 & _BV(4) ) !=0 )
#define IS_TX_PAUSE_on ( ( protocol_flags2 & (_BV(4)|_BV(3)) ) !=0 )
#define IS_BIND_BUTTON_on (digitalRead(BIND_pin)==0x00)
#define BIND_SET_INPUT pinMode(BIND_pin,INPUT)
#define BIND_SET_PULLUP digitalHi(GPIOA,BIND_pin)
#define BIND_SET_OUTPUT pinMode(BIND_pin,OUTPUT)
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_BAD_PROTO_TIME_LOW 1000
@ -364,7 +416,7 @@ enum CYRF_POWER
#define CYRF_HIGH_POWER CYRF_POWER_7
#define CYRF_LOW_POWER CYRF_POWER_3
#define CYRF_RANGE_POWER CYRF_POWER_1 // 1/30 of the full power distance
#define CYRF_BIND_POWER CYRF_POWER_0
#define CYRF_BIND_POWER CYRF_POWER_1
enum TXRX_State {
TXRX_OFF,
@ -379,10 +431,9 @@ enum {
PKT_TIMEOUT
};
//*******************
//*** CRC Table ***
//*******************
// baudrate defines for serial
#define SPEED_100K 0
#define SPEED_9600 1
//****************************************