From 46eb0bc474ae4df4b7c9c9e0e9ef514ef23a94ea Mon Sep 17 00:00:00 2001 From: midelic Date: Wed, 25 Jan 2017 20:50:29 +0200 Subject: [PATCH] added more info --- docs/BOM_DIY_STM32.md | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/docs/BOM_DIY_STM32.md b/docs/BOM_DIY_STM32.md index 1ab89e3..10da55a 100644 --- a/docs/BOM_DIY_STM32.md +++ b/docs/BOM_DIY_STM32.md @@ -6,6 +6,13 @@ If you are looking for the BOM for the DIY ATmega328 3.2d version click [here](B Digikey may not be your preferred supplier, but you should find enough information on their page to cross reference parts. +## IMPORTANT NOTE +If your TX is Turnigy 9X,9XR,9XR+, the instalation of the inverter chip SN74LVC2G00DCTR ,it is **OPTIONAL** not required. + +Aditinally in order to have telemetry you need to bridge solder **SJ1/SJ301** on the back of the board depending on which board version you have. + +The inverted telemetry signal is required only by TARANIS TX so for this to work propperly , the inverter chip is necessary to be installed. + ## BOM DIY STM32 PCB V1.0t - the USB version This BOM is for the board with the USB port for firmware uploading that looks like this - check carefully: