gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:48:11 +00:00
Code Issues Projects Releases Wiki Activity

Update Compiling_STM32.md

Browse Source
This commit is contained in:
pascallanger 2018-07-20 15:39:44 +02:00 committed by GitHub
parent b8f3cd1ad8
commit 457fc5296e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Compiling_STM32.md
View File

@ -127,11 +127,11 @@ In order to flash the bootloader the **BOOT0** jumper must be installed connecti
| **DIY Multiprotocol Module** | **Banggood 4-in-1 Module** | **iRangeX IRX4 Module** | **iRangeX IRX4 Plus Module** | **Vantac MPM Lite** |
|:---:|:---:|:---:|:---:|:---:|
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. | Brdige the two pins next to the usb port labelled with Boot0 |
| Bridge pins 1 and 2 as shown by the yellow jumper wire. | Bridge the left-most pins of the 6-pin header as shown by the yellow jumper. | Bridge pins 1 and 2 as shown by the blue jumper. | Bridge the BOOT0 pin to the adjacent 3.3V pin as shown by the yellow jumper. If not working add a second bridge above the one shown.| Brdige the two pins next to the usb port labelled with Boot0 |
| <img src="images/diy-ch340g.jpg" height="200"/> | <img src="images/bg-stm32-boot0.jpg" height="200"/> | <img src="images/irx4-boot0.jpg" height="200"/> | <img src="images/irx4plus-boot0.jpg" height="200"/> | <img src="images/mpmlite-boot0.jpg" width="200" /> |
1. If on Linux, ensure you have permissions to access serial interfaces as described in [Install the Maple USB drivers](#install-the-maple-usb-drivers)
1. Install the **BOOT0** jumper as described above
1. Install the **BOOT0** jumper as described above.
1. Switch on the transmitter
1. Verify that you have selected the desired upload method under **Tools -> Upload Method**
1. Verify that you have selected **stm32flash (FTDI)** as the programmer under **Tools -> Programmer**