gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:48:11 +00:00
Code Issues Projects Releases Wiki Activity

STM32: USART init changed

Browse Source
This commit is contained in:
pascallanger 2016-11-06 16:34:40 +01:00
parent 22529e28d8
commit 4348f4b0d4
2 changed files with 21 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Multiprotocol/Multiprotocol.ino
View File

@ -938,8 +938,8 @@ void Mprotocol_serial_init()
PORTC.PIN3CTRL |= 0x40 ;
#endif
#elif defined STM32_BOARD
Serial1.begin(100000,SERIAL_8E2);//USART2
Serial2.begin(100000,SERIAL_8E2);//USART3
usart2_begin(100000,SERIAL_8E2);
usart3_begin(100000,SERIAL_8E2);
USART2_BASE->CR1 |= USART_CR1_PCE_BIT;
USART3_BASE->CR1 &= ~ USART_CR1_RE;//disable
USART2_BASE->CR1 &= ~ USART_CR1_TE;//disable transmit

23
Multiprotocol/Telemetry.ino
View File

@ -549,7 +549,7 @@ void TelemetryUpdate()
USARTC0.CTRLC = 0x03 ;
#else
#ifdef STM32_BOARD
Serial2.begin(9600); //USART3
usart3_begin(9600,SERIAL_8N1); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
@ -570,7 +570,7 @@ void TelemetryUpdate()
USARTC0.CTRLC = 0x03 ;*/
#else
#ifdef STM32_BOARD
Serial2.begin(57600); //USART3
usart3_begin(57600,SERIAL_8N1); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
@ -591,7 +591,7 @@ void TelemetryUpdate()
USARTC0.CTRLC = 0x03 ;*/
#else
#ifdef STM32_BOARD
Serial2.begin(125000); //USART3
usart3_begin(125000,SERIAL_8N1); //USART3
USART3_BASE->CR1 &= ~ USART_CR1_RE; //disable RX leave TX enabled
#else
UBRR0H = 0x00;
@ -641,7 +641,22 @@ void TelemetryUpdate()
}
#endif
}
#ifdef STM32_BOARD
void usart2_begin(uint32_t baud,uint32_t config )
{
usart_init(USART2);
usart_config_gpios_async(USART2,GPIOA,PIN_MAP[PA3].gpio_bit,GPIOA,PIN_MAP[PA2].gpio_bit,config);
usart_set_baud_rate(USART2, STM32_PCLK1, baud);//
usart_enable(USART2);
}
void usart3_begin(uint32_t baud,uint32_t config )
{
usart_init(USART3);
usart_config_gpios_async(USART3,GPIOB,PIN_MAP[PB11].gpio_bit,GPIOB,PIN_MAP[PB10].gpio_bit,config);
usart_set_baud_rate(USART3, STM32_PCLK1, baud);
usart_enable(USART3);
}
#endif
#else //BASH_SERIAL
// Routines for bit-bashed serial output