Fix message displaying the DataPath after saving (#787)

* #751 DSM Enhancements

 #751 DSM Forward Programming Enhancements (New GUI, etc)

* Make both work on EdgeTx and OpenTX

* #751 Turn OFF simulation by default

Distribution code with RX simulation OFF
Simulation should be only for Development

* #751 Update Readme Documentation

Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake

* #751 Fix problems With Reset RX

1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup

2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.

3. Handle RX resets properly. It needed after initial setup

* #751 Cosmetic and Show Orientation Images

#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen

* #751 add check for required libraries

Add check that the required files in DSMLIB exist

* #751

Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.

* #766

Change the way to detect that the files exist. now works on both ETX and OTX

* #766 Strange Flickering in OTX

Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem

* #766 Change way of dectecting EdgeTX

Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15

* #766  make editable Gain Values

Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.

* #766 More enhacements

Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation

* #751 more cosmetic things

1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match

* #751 A few final changes

1. Update channel names to include channel number. i.e: Ch5 (Gear)
2,  Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings

* #751

1. Added Warning Screen
2. Correct handling of Unknown lines in Gyro Settings->Initial Setup

* #751

New v0.51 version.
- Added new menus to configure Model/Wing type.  Without it, the initial setup will not work properly.

* #751 More fixes on mixers and servo reverse

-- Fix problem reversing servos when using vtail/delta mix
-- Properly detect ch order of multimodule

* #751 Updated channel naming and docs

Updated readme documentation
Consistent naming of Ch across the code.

* #751 Fix message displaying data path

Co-authored-by: pascallanger <pascal_langer@yahoo.fr>

Lua_scripts/DSMLIB/DsmFwPrgLib.lua

@@ -480,7 +480,7 @@ local function ExtractDisplayAttr(text1, attr)
         attr = bit32.bor(attr, DISP_ATTR.BOLD)
     end
 
-    text, pos = string.gsub(text, "/M", "")
+    text, pos = string.gsub(text, "/m", "")
     if (pos>0) then -- FORCED MENU Button 
         attr = bit32.bor(attr, DISP_ATTR.FORCED_MENU)
     end
@@ -1378,7 +1378,7 @@ local function DSM_Init_Text(rxId)
     -- Text allightment:  /c = CENTER, /r = RIGHT
     -- Text effects:  /b = BOLD
     -- Text formatting: /p = PERCENT numbers (forced if not in Line Type=PERCENT)
-    -- Navigaton: /M = Force to be a Menu button, when a menu navigates to itself, 
+    -- Navigaton: /m = Force to be a Menu button, when a menu navigates to itself, 
     --      is usually a message line.. but sometimes, we want to navigate to the same page to refresh values
 
     -- array List_Values:
@@ -1528,7 +1528,8 @@ local function DSM_Init_Text(rxId)
     Text[0x00C7] = "Calibrate Sensor"
     Text[0x00C8] = "Complete" -- FC6250HX calibration complete 
     Text[0x00CA] = "SAFE/Panic Mode Setup"
-    Text[0x00CD] = "Level model and capture attitude/M"; -- Different from List_Text , and force it to be a menu button
+    Text[0x00CD] = "Level model and capture attitude/m"; -- Different from List_Text , and force it to be a menu button
+
 
     -- RX Orientations for AR631/AR637, Optionally attach an Image + Alt Text to display
     List_Text[0x00CB] = "Position 1";  List_Text_Img[0x00CB]  = "rx_pos_1.png|Pilot View: RX Label Up, Pins Back" 

Lua_scripts/DSMLIB/DsmSetupLib.lua

@@ -724,7 +724,7 @@ local function ST_LoadMenu(menuId)
 
 
         local msg1 = "Data saved to: " 
-        local msg2 = DATA_PATH..hashName(MODEL.modelName)..".txt" 
+        local msg2 = "  "..DATA_PATH.."/"..hashName(MODEL.modelName)..".txt" 
 
         ctx.Menu = { MenuId = 0x1005, Text = "Config Saved", PrevId = 0, NextId = 0, BackId = 0, TextId=0 }
         ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, Text=msg1, TextId = 0, ValId = 0x1005 }
@@ -735,7 +735,7 @@ local function ST_LoadMenu(menuId)
     elseif (menuId==0x1006) then
         ST_LoadFileData()
         local msg1 = "Data restored from: " 
-        local msg2 = DATA_PATH..hashName(MODEL.modelName)..".txt" 
+        local msg2 = "  "..DATA_PATH.."/"..hashName(MODEL.modelName)..".txt" 
         
         ctx.Menu = { MenuId = 0x1006, Text = "Discart Changes", PrevId = 0, NextId = 0, BackId = 0, TextId=0 }
         ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, Text=msg1, TextId = 0, ValId = 0x1006 }