gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 10:17:53 +00:00
Code Issues Projects Releases Wiki Activity

Update Module_BG_4-in-1.md

Browse Source
This commit is contained in:
pascallanger 2017-01-25 15:09:44 +01:00 committed by GitHub
parent 35e1ddc578
commit 37c7167128
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Module_BG_4-in-1.md
View File

@ -30,9 +30,9 @@ If you are only planning on using the PPM interface with your transmitter, you n
Some radios have an open collector output (Futaba, Graupner...), in this case you should add a 4.7K resistor between PPM and BATT.
This is valid for any version of the module.
The same plug is available on all versions of the module with the same signal locations.
You are now ready to go over to [Compiling and Programming](Compiling.md).
If you wish to add an external device reading the telemetry, you need to enable serial mode as explained in the next topics otherwise you are now ready to go over to [Compiling and Programming](Compiling.md).
###Serial mode
If you have a transmitter that can support serial communication with the board then you need to wire up the board appropriately. There are three versions of the module and the steps are slightly different.