gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 23:48:13 +00:00
Code Issues Projects Releases Wiki Activity

Update Module_Build_yourself_PCB.md

Browse Source
This commit is contained in:
gerrievanzyl 2016-10-22 06:17:49 -04:00 committed by GitHub
parent 2eb2d555ad
commit 34036ee355
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Module_Build_yourself_PCB.md
View File

@ -53,7 +53,7 @@ If you got this far you already know what you are doing!!
###PPM interface ###PPM interface
If you are only planning on using the PPM interface with transmitter you are ready to program the module as described in Compiling and Programming the module. If you are only planning on using the PPM interface with transmitter you are ready to program the module as described in Compiling and Programming the module.
###Enabling Serial interface ###Enabling Serial and Telemetry interface
If you have a transmitter that can support serial communication with the board then you need to solder some jumpers. If you have a transmitter that can support serial communication with the board then you need to solder some jumpers.
@ -69,7 +69,7 @@ There are four solder type jumpers on the bottom side of the board near the lowe
(J-4) Use (MOD) only to connect the transmitter pin 2 to pin 1 of the two pin header (P3). (J-4) Use (MOD) only to connect the transmitter pin 2 to pin 1 of the two pin header (P3).
**It is most likely J-2 will be the only one needing to be shorted for the serial method of sending model protocols.** **It is most likely J-2 will be the only one needing to be shorted for the serial method of sending model protocols. If you plan to use telemetry you will also need to solder J-3**
You are now ready to go over to [Compiling and Programming](Compiling.md). You are now ready to go over to [Compiling and Programming](Compiling.md).