gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 18:28:15 +00:00
Code Issues Projects Releases Wiki Activity

Update Module_Build_yourself_PCB.md

Browse Source
This commit is contained in:
gerrievanzyl 2016-10-22 06:17:49 -04:00 committed by GitHub
parent 2eb2d555ad
commit 34036ee355
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
docs/Module_Build_yourself_PCB.md
View File

@ -53,7 +53,7 @@ If you got this far you already know what you are doing!!
###PPM interface
If you are only planning on using the PPM interface with transmitter you are ready to program the module as described in Compiling and Programming the module.
###Enabling Serial interface
###Enabling Serial and Telemetry interface
If you have a transmitter that can support serial communication with the board then you need to solder some jumpers.
@ -69,7 +69,7 @@ There are four solder type jumpers on the bottom side of the board near the lowe
(J-4) Use (MOD) only to connect the transmitter pin 2 to pin 1 of the two pin header (P3).
**It is most likely J-2 will be the only one needing to be shorted for the serial method of sending model protocols.**
**It is most likely J-2 will be the only one needing to be shorted for the serial method of sending model protocols. If you plan to use telemetry you will also need to solder J-3**
You are now ready to go over to [Compiling and Programming](Compiling.md).