gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:48:11 +00:00
Code Issues Projects Releases Wiki Activity

Core: option to reverse input channels

Browse Source
This commit is contained in:
pascallanger 2016-12-01 22:30:27 +01:00
parent afb7af287b
commit 33d676e1fe
2 changed files with 31 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
Multiprotocol/Multiprotocol.ino
View File

@ -62,6 +62,9 @@ uint8_t packet[40];
uint16_t Servo_data[NUM_CHN];
uint8_t Servo_AUX;
uint16_t servo_max_100,servo_min_100,servo_max_125,servo_min_125;
#if defined(REVERSE_AILERON) || defined(REVERSE_ELEVATOR) || defined(REVERSE_THROTTLE) || defined(REVERSE_RUDDER)
uint16_t servo_mid;
#endif
// Protocol variables
uint8_t cyrfmfg_id[6];//for dsm2 and devo
@ -353,7 +356,7 @@ void setup()
#endif
#if defined(TELEMETRY)
PPM_Telemetry_serial_init(); // Configure serial for telemetry
PPM_Telemetry_serial_init();// Configure serial for telemetry
#endif
}
else
@ -365,9 +368,12 @@ void setup()
protocol=0;
servo_max_100=SERIAL_MAX_100; servo_min_100=SERIAL_MIN_100;
servo_max_125=SERIAL_MAX_125; servo_min_125=SERIAL_MIN_125;
Mprotocol_serial_init(); // Configure serial and enable RX interrupt
Mprotocol_serial_init(); // Configure serial and enable RX interrupt
#endif //ENABLE_SERIAL
}
#if defined(REVERSE_AILERON) || defined(REVERSE_ELEVATOR) || defined(REVERSE_THROTTLE) || defined(REVERSE_RUDDER)
servo_mid=servo_min_100+servo_max_100; //In fact 2* mid_value
#endif
}
// Main
@ -455,14 +461,12 @@ void Update_All()
if(mode_select==MODE_SERIAL && IS_RX_FLAG_on) // Serial mode and something has been received
{
update_serial_data(); // Update protocol and data
update_aux_flags();
if(IS_CHANGE_PROTOCOL_FLAG_on)
{ // Protocol needs to be changed
LED_off; //led off during protocol init
modules_reset(); //reset all modules
protocol_init(); //init new protocol
}
INPUT_SIGNAL_on; //valid signal received
last_signal=millis();
}
@ -480,12 +484,12 @@ void Update_All()
else if(temp_ppm>PPM_MAX_125) temp_ppm=PPM_MAX_125;
Servo_data[i]= temp_ppm ;
}
update_aux_flags();
PPM_FLAG_off; // wait for next frame before update
INPUT_SIGNAL_on; //valid signal received
last_signal=millis();
}
#endif //ENABLE_PPM
update_channels_aux();
#if defined(TELEMETRY)
if((protocol==MODE_FRSKYD) || (protocol==MODE_HUBSAN) || (protocol==MODE_AFHDS2A) || (protocol==MODE_FRSKYX) || (protocol==MODE_DSM) )
TelemetryUpdate();
@ -493,9 +497,23 @@ void Update_All()
update_led_status();
}
// Update Servo_AUX flags based on servo AUX positions
static void update_aux_flags(void)
// Update channels direction and Servo_AUX flags based on servo AUX positions
static void update_channels_aux(void)
{
//Reverse channels direction
#ifdef REVERSE_AILERON
Servo_data[AILERON]=servo_mid-Servo_data[AILERON];
#endif
#ifdef REVERSE_ELEVATOR
Servo_data[ELEVATOR]=servo_mid-Servo_data[ELEVATOR];
#endif
#ifdef REVERSE_THROTTLE
Servo_data[THROTTLE]=servo_mid-Servo_data[THROTTLE];
#endif
#ifdef REVERSE_RUDDER
Servo_data[RUDDER]=servo_mid-Servo_data[RUDDER];
#endif
//Calc AUX flags
Servo_AUX=0;
for(uint8_t i=0;i<8;i++)
if(Servo_data[AUX1+i]>PPM_SWITCH)

6
Multiprotocol/_Config.h
View File

@ -35,6 +35,12 @@
//Default is AETR.
#define AETR
//Uncomment to reverse the direction of the specified channel for all protocols
//#define REVERSE_AILERON
//#define REVERSE_ELEVATOR
//#define REVERSE_THROTTLE
//#define REVERSE_RUDDER
/**************************/
/*** RF CHIPS INSTALLED ***/