From 324419241f73a24ce3b13c79896238ceb412cafa Mon Sep 17 00:00:00 2001
From: Ben Lye <ben@lye.co.nz>
Date: Mon, 16 Aug 2021 16:59:07 +0100
Subject: [PATCH] Prefix release binaries with mm instead of multi (#596)

Better for radios with 128x64 LCDs.
---
 buildroot/bin/build_release_avr_noboot        | 12 ++--
 buildroot/bin/build_release_avr_optiboot      | 12 ++--
 buildroot/bin/build_release_orx               |  8 +--
 .../bin/build_release_stm32f1_native_debug    |  4 +-
 buildroot/bin/build_release_stm32f1_no_debug  | 60 +++++++++----------
 .../bin/build_release_stm32f1_serial_debug    |  4 +-
 buildroot/bin/build_release_stm32f1_t18int    | 12 ++--
 7 files changed, 56 insertions(+), 56 deletions(-)

diff --git a/buildroot/bin/build_release_avr_noboot b/buildroot/bin/build_release_avr_noboot
index eb778ab..201db3d 100644
--- a/buildroot/bin/build_release_avr_noboot
+++ b/buildroot/bin/build_release_avr_noboot
@@ -3,27 +3,27 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable CHECK_FOR_BOOTLOADER;
 opt_disable $ALL_PROTOCOLS;
 opt_enable $A7105_PROTOCOLS;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-usbasp-aetr-A7105-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_enable $CC2500_PROTOCOLS;
 opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO OMP_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO FRSKYL_CC2500_INO;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-usbasp-aetr-CC2500-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_enable $CYRF6936_PROTOCOLS;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-usbasp-aetr-CYRF6936-inv-v$MULTI_VERSION.bin;
 
 exit $exitcode;
diff --git a/buildroot/bin/build_release_avr_optiboot b/buildroot/bin/build_release_avr_optiboot
index 93f02f3..039478b 100644
--- a/buildroot/bin/build_release_avr_optiboot
+++ b/buildroot/bin/build_release_avr_optiboot
@@ -3,27 +3,27 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable CHECK_FOR_BOOTLOADER;
 opt_disable $ALL_PROTOCOLS;
 opt_enable $A7105_PROTOCOLS;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-txflash-aetr-A7105-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_enable $CC2500_PROTOCOLS;
 opt_disable HITEC_CC2500_INO REDPINE_CC2500_INO OMP_CC2500_INO SKYARTEC_CC2500_INO SCANNER_CC2500_INO FRSKYL_CC2500_INO;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-txflash-aetr-CC2500-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_enable $CYRF6936_PROTOCOLS;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin; 
+mv build/Multiprotocol.ino.bin ./binaries/mm-avr-txflash-aetr-CYRF6936-inv-v$MULTI_VERSION.bin; 
 
 exit $exitcode;
diff --git a/buildroot/bin/build_release_orx b/buildroot/bin/build_release_orx
index ba70d65..f2d05c4 100644
--- a/buildroot/bin/build_release_orx
+++ b/buildroot/bin/build_release_orx
@@ -3,18 +3,18 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-orangerx-aetr-green-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable $ALL_PROTOCOLS;
 opt_disable ORANGE_TX_BLUE;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-orangerx-aetr-green-inv-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable ORANGE_TX_BLUE;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-orangerx-aetr-blue-inv-v$MULTI_VERSION.bin;
 
 printf "\e[33;1mPackaging ancilliary files for v$MULTI_VERSION\e[0m\n";
 cp Multiprotocol/Multi.txt ./binaries/Multi.txt;
diff --git a/buildroot/bin/build_release_stm32f1_native_debug b/buildroot/bin/build_release_stm32f1_native_debug
index e1f8b6e..c4ad459 100644
--- a/buildroot/bin/build_release_stm32f1_native_debug
+++ b/buildroot/bin/build_release_stm32f1_native_debug
@@ -3,11 +3,11 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_add XN297DUMP_NRF24L01_INO;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-xn297dump-usbdebug-v$MULTI_VERSION.bin;
 
 exit $exitcode;
diff --git a/buildroot/bin/build_release_stm32f1_no_debug b/buildroot/bin/build_release_stm32f1_no_debug
index 46bbd40..a506b7a 100644
--- a/buildroot/bin/build_release_stm32f1_no_debug
+++ b/buildroot/bin/build_release_stm32f1_no_debug
@@ -4,68 +4,68 @@ source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
 # Generic 4-in-1 builds
-printf "\e[33;1mBuilding multi-stm-serial-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-serial-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable ENABLE_PPM;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-serial-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-serial-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-serial-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-serial-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-serial-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-serial-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-serial-reta-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-v$MULTI_VERSION.bin;
 
 # DIY 5-in-1 builds
-printf "\e[33;1mBuilding multi-stm-5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace RETA AETR;
 opt_enable SX1276_INSTALLED;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-5in1-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-5in1-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-5in1-reta-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-reta-v$MULTI_VERSION.bin;
 
 # T-Lite 5-in-1 builds
-printf "\e[33;1mBuilding multi-tlite5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-tlite5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace RETA AETR;
 opt_disable INVERT_TELEMETRY;
 opt_disable SX1276_INSTALLED;
 opt_enable "MULTI_5IN1_INTERNAL JP_TLite"
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-tlite5in1-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-tlite5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-tlite5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-tlite5in1-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-tlite5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-tlite5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-tlite5in1-reta-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-reta-v$MULTI_VERSION.bin;
 
 # CC2500-only builds
-printf "\e[33;1mBuilding multi-stm-cc2500-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-cc2500-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace RETA AETR;
 opt_disable "MULTI_5IN1_INTERNAL JP_TLite"
 opt_disable A7105_INSTALLED;
@@ -74,22 +74,22 @@ opt_disable NRF24L01_INSTALLED;
 opt_disable INVERT_TELEMETRY;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-cc2500-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-cc2500-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-cc2500-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-cc2500-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-cc2500-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-cc2500-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-cc2500-reta-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-v$MULTI_VERSION.bin;
 
 # 4-in-1 PPM builds
-printf "\e[33;1mBuilding multi-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_enable A7105_INSTALLED;
 opt_enable CYRF6936_INSTALLED;
 opt_enable NRF24L01_INSTALLED;
@@ -101,18 +101,18 @@ opt_disable MULTI_TELEMETRY;
 opt_set NBR_BANKS 5;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-ppm-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-ppm-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-stm-ppm-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-ppm-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-ppm-reta-v$MULTI_VERSION.bin; 
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-reta-v$MULTI_VERSION.bin; 
 
 exit $exitcode;
diff --git a/buildroot/bin/build_release_stm32f1_serial_debug b/buildroot/bin/build_release_stm32f1_serial_debug
index 89e4055..0001ffe 100644
--- a/buildroot/bin/build_release_stm32f1_serial_debug
+++ b/buildroot/bin/build_release_stm32f1_serial_debug
@@ -3,11 +3,11 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable $ALL_PROTOCOLS;
 opt_add XN297DUMP_NRF24L01_INO;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-stm-xn297dump-ftdidebug-v$MULTI_VERSION.bin;
 
 exit $exitcode;
diff --git a/buildroot/bin/build_release_stm32f1_t18int b/buildroot/bin/build_release_stm32f1_t18int
index c665b26..196f5f8 100644
--- a/buildroot/bin/build_release_stm32f1_t18int
+++ b/buildroot/bin/build_release_stm32f1_t18int
@@ -3,23 +3,23 @@
 source ./buildroot/bin/buildFunctions;
 exitcode=0;
 
-printf "\e[33;1mBuilding multi-t18int-aetr-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-t18int-aetr-v$MULTI_VERSION.bin\e[0m\n";
 opt_disable ENABLE_PPM;
 opt_disable INVERT_TELEMETRY;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-aetr-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-t18int-aetr-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-t18int-taer-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-t18int-taer-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace AETR TAER;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-taer-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-t18int-taer-v$MULTI_VERSION.bin;
 
-printf "\e[33;1mBuilding multi-t18int-reta-v$MULTI_VERSION.bin\e[0m\n";
+printf "\e[33;1mBuilding mm-t18int-reta-v$MULTI_VERSION.bin\e[0m\n";
 opt_replace TAER RETA;
 buildMulti;
 exitcode=$((exitcode+$?));
-mv build/Multiprotocol.ino.bin ./binaries/multi-t18int-reta-v$MULTI_VERSION.bin;
+mv build/Multiprotocol.ino.bin ./binaries/mm-t18int-reta-v$MULTI_VERSION.bin;
 
 exit $exitcode;