gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 10:17:53 +00:00
Code Issues Projects Releases Wiki Activity

PPM mode FrSkyX to FrSkyD

Browse Source 
If TELEMETRY_FRSKYX_TO_FRSKYD is defined in PPM mode FrSkyX simple telemetry will be sent using FrSkyD format:
RX_RSSI, RX_Batt, TX_RSSI, TX_LQI
This commit is contained in:
pascallanger 2019-10-12 19:50:41 +02:00
parent 6dfd54b8be
commit 31ff27b1d3
13 changed files with 54 additions and 63 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
Multiprotocol/AFHDS2A_a7105.ino
View File

@ -404,9 +404,6 @@ uint16_t initAFHDS2A()
rx_id[i]=eeprom_read_byte((EE_ADDR)(addr+i));
}
hopping_frequency_no = 0;
#if defined(AFHDS2A_FW_TELEMETRY) || defined(AFHDS2A_HUB_TELEMETRY)
init_frskyd_link_telemetry();
#endif
return 50000;
}
#endif

3
Multiprotocol/BUGSMINI_nrf24l01.ino
View File

@ -376,9 +376,6 @@ uint16_t initBUGSMINI()
armed = 0;
arm_flags = BUGSMINI_FLAG_DISARM; // initial value from captures
arm_channel_previous = BUGSMINI_CH_SW_ARM;
#ifdef BUGS_HUB_TELEMETRY
init_frskyd_link_telemetry();
#endif
return BUGSMINI_INITIAL_WAIT;
}

4
Multiprotocol/Bayang_nrf24l01.ino
View File

@ -352,10 +352,6 @@ uint16_t initBAYANG(void)
BAYANG_initialize_txid();
BAYANG_init();
packet_count=0;
#ifdef BAYANG_HUB_TELEMETRY
init_frskyd_link_telemetry();
telemetry_lost=1; // do not send telemetry to TX right away until we have a TX_RSSI value to prevent warning message...
#endif
return BAYANG_INITIAL_WAIT+BAYANG_PACKET_PERIOD;
}

3
Multiprotocol/Bugs_a7105.ino
View File

@ -457,9 +457,6 @@ uint16_t initBUGS(void)
armed = 0;
arm_flags = BUGS_FLAG_DISARM; // initial value from captures
arm_channel_previous = BUGS_CH_SW_ARM;
#ifdef BUGS_HUB_TELEMETRY
init_frskyd_link_telemetry();
#endif
return 10000;
}

4
Multiprotocol/CABELL_nrf224l01.ino
View File

@ -430,10 +430,6 @@ uint16_t initCABELL(void)
else
bind_counter = CABELL_BIND_COUNT;
CABELL_init();
#if defined CABELL_HUB_TELEMETRY
init_frskyd_link_telemetry();
telemetry_lost=1; // do not send telemetry to TX right away until we have a TX_RSSI value to prevent warning message...
#endif
packet_period = CABELL_PACKET_PERIOD;

3
Multiprotocol/FrSkyD_cc2500.ino
View File

@ -97,9 +97,6 @@ uint16_t initFrSky_2way()
{
Frsky_init_hop();
packet_count=0;
#if defined TELEMETRY
init_frskyd_link_telemetry();
#endif
if(IS_BIND_IN_PROGRESS)
{
frsky2way_init(1);

4
Multiprotocol/Hitec_cc2500.ino
View File

@ -392,10 +392,6 @@ uint16_t initHITEC()
rx_tx_addr[3]=0x6A;
memcpy((void *)hopping_frequency,(void *)"\x00\x3A\x4A\x32\x0C\x58\x2A\x10\x26\x20\x08\x60\x68\x70\x78\x80\x88\x56\x5E\x66\x6E",HITEC_NUM_FREQUENCE);
#endif
#if defined(HITEC_HUB_TELEMETRY)
if(sub_protocol==OPT_HUB)
init_frskyd_link_telemetry();
#endif
phase = HITEC_START;
return 10000;
}

3
Multiprotocol/Hubsan_a7105.ino
View File

@ -465,9 +465,6 @@ uint16_t initHubsan()
}
packet_count=0;
bind_phase=0;
#ifdef HUBSAN_HUB_TELEMETRY
init_frskyd_link_telemetry();
#endif
return 10000;
}

6
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 0
#define VERSION_PATCH_LEVEL 13
#define VERSION_PATCH_LEVEL 14
//******************
// Protocols
@ -607,7 +607,7 @@ enum {
16 channels serial protocol
***************************
Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Total of 26 bytes for protocol V1, variable length for protocol V2
Total of 26 bytes for protocol V1, variable length 27..36 for protocol V2
Stream[0] = header
0x55 sub_protocol values are 0..31 Stream contains channels
0x54 sub_protocol values are 32..63 Stream contains channels
@ -836,7 +836,7 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
Future_Use => 0x04 0= , 1=
Disable_Telemetry => 0x02 0=enable, 1=disable
Disable_CH_Mapping => 0x01 0=enable, 1=disable
Stream[27.. 36] = between 0 and 9 bytes for additional protocol data
Stream[27.. 35] = between 0 and 9 bytes for additional protocol data
*/
/*
Multimodule Status

19
Multiprotocol/Multiprotocol.ino
View File

@ -937,8 +937,7 @@ static void protocol_init()
#endif
tx_pause();
pass=0;
telemetry_link=0;
telemetry_lost=1;
init_frskyd_link_telemetry();
#ifdef BASH_SERIAL
TIMSK0 = 0 ; // Stop all timer 0 interrupts
#ifdef INVERT_SERIAL
@ -1883,10 +1882,16 @@ void pollBoot()
#if defined(TELEMETRY)
void PPM_Telemetry_serial_init()
{
if( (protocol==PROTO_FRSKYD) || (protocol==PROTO_HUBSAN) || (protocol==PROTO_AFHDS2A) || (protocol==PROTO_BAYANG)|| (protocol==PROTO_NCC1701) || (protocol==PROTO_CABELL) || (protocol==PROTO_HITEC) || (protocol==PROTO_BUGS) || (protocol==PROTO_BUGSMINI))
if( (protocol==PROTO_FRSKYD) || (protocol==PROTO_HUBSAN) || (protocol==PROTO_AFHDS2A) || (protocol==PROTO_BAYANG)|| (protocol==PROTO_NCC1701) || (protocol==PROTO_CABELL) || (protocol==PROTO_HITEC) || (protocol==PROTO_BUGS) || (protocol==PROTO_BUGSMINI)
#ifdef TELEMETRY_FRSKYX_TO_FRSKYD
|| (protocol==PROTO_FRSKYX)
#endif
)
initTXSerial( SPEED_9600 ) ;
#ifndef TELEMETRY_FRSKYX_TO_FRSKYD
if(protocol==PROTO_FRSKYX)
initTXSerial( SPEED_57600 ) ;
#endif
if(protocol==PROTO_DSM)
initTXSerial( SPEED_125K ) ;
}
@ -2028,14 +2033,14 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
#endif
{
#if defined STM32_BOARD
TIMER2_BASE->CCR2=TIMER2_BASE->CNT + 300; // Next byte should show up within 15us=1.5 byte
TIMER2_BASE->CCR2=TIMER2_BASE->CNT + 360; // Next byte should show up within 18??s=1.5 byte
TIMER2_BASE->SR = 0x1E5F & ~TIMER_SR_CC2IF; // Clear Timer2/Comp2 interrupt flag
TIMER2_BASE->DIER |= TIMER_DIER_CC2IE; // Enable Timer2/Comp2 interrupt
#else
TX_RX_PAUSE_on;
tx_pause();
cli(); // Disable global int due to RW of 16 bits registers
OCR1B = TCNT1 + 300; // Next byte should show up within 15us=1.5 byte
OCR1B = TCNT1 + 360; // Next byte should show up within 18??s=1.5 byte
sei(); // Enable global int
TIFR1 = OCF1B_bm ; // clear OCR1B match flag
SET_TIMSK1_OCIE1B ; // enable interrupt on compare B match
@ -2054,10 +2059,10 @@ static uint32_t random_id(uint16_t address, uint8_t create_new)
{
rx_buff[rx_idx++]=UDR0; // Store received byte
#if defined STM32_BOARD
TIMER2_BASE->CCR2=TIMER2_BASE->CNT + 300; // Next byte should show up within 15us=1.5 byte
TIMER2_BASE->CCR2=TIMER2_BASE->CNT + 360; // Next byte should show up within 18??s=1.5 byte
#else
cli(); // Disable global int due to RW of 16 bits registers
OCR1B = TCNT1 + 300; // Next byte should show up within 15us=1.5 byte
OCR1B = TCNT1 + 360; // Next byte should show up within 18??s=1.5 byte
sei(); // Enable global int
#endif
}

3
Multiprotocol/NCC1701_nrf24l01.ino
View File

@ -269,9 +269,6 @@ uint16_t initNCC(void)
hopping_frequency_no=4; // start with bind
NCC_init();
phase=NCC_BIND_TX1;
#ifdef NCC1701_HUB_TELEMETRY
init_frskyd_link_telemetry();
#endif
return 10000;
}

23
Multiprotocol/Telemetry.ino
View File

@ -369,7 +369,13 @@ void frsky_check_telemetry(uint8_t *packet_in,uint8_t len)
RX_RSSI=packet_in[4] & 0x7F ;
else
RxBt = (packet_in[4]<<1) + 1 ;
#if defined(TELEMETRY_FRSKYX_TO_FRSKYD) && defined(ENABLE_PPM)
if(mode_select != MODE_SERIAL)
{//PPM
v_lipo1=RxBt;
return;
}
#endif
//Save outgoing telemetry sequence
FrSkyX_TX_IN_Seq=packet_in[5] >> 4;
@ -447,6 +453,7 @@ void init_frskyd_link_telemetry()
{
telemetry_link=0;
telemetry_counter=0;
telemetry_lost=1;
v_lipo1=0;
v_lipo2=0;
RX_RSSI=0;
@ -467,8 +474,7 @@ void frsky_link_frame()
telemetry_link |= 2 ; // Send hub if available
}
else
if (protocol==PROTO_HUBSAN||protocol==PROTO_AFHDS2A||protocol==PROTO_BAYANG||protocol==PROTO_NCC1701||protocol==PROTO_CABELL||protocol==PROTO_HITEC||protocol==PROTO_BUGS||protocol==PROTO_BUGSMINI)
{
{//PROTO_HUBSAN, PROTO_AFHDS2A, PROTO_BAYANG, PROTO_NCC1701, PROTO_CABELL, PROTO_HITEC, PROTO_BUGS, PROTO_BUGSMINI, PROTO_FRSKYX
frame[1] = v_lipo1;
frame[2] = v_lipo2;
frame[3] = RX_RSSI;
@ -794,7 +800,7 @@ void TelemetryUpdate()
return;
}
#ifdef MULTI_SYNC
else if ( (now - lastInputSync) > INPUT_SYNC_TIME)
if ( (now - lastInputSync) > INPUT_SYNC_TIME)
{
mult_send_inputsync();
lastInputSync = now;
@ -804,7 +810,11 @@ void TelemetryUpdate()
#endif
#if defined SPORT_TELEMETRY
if (protocol==PROTO_FRSKYX)
if (protocol==PROTO_FRSKYX
#ifdef TELEMETRY_FRSKYX_TO_FRSKYD
&& mode_select==MODE_SERIAL
#endif
)
{ // FrSkyX
for(;;)
{ //Empty buffer
@ -870,8 +880,9 @@ void TelemetryUpdate()
}
#endif
if((telemetry_link & 1 )&& protocol != PROTO_FRSKYX)
if( telemetry_link & 1 )
{ // FrSkyD + Hubsan + AFHDS2A + Bayang + Cabell + Hitec + Bugs + BugsMini + NCC1701
// FrSkyX telemetry if in PPM
frsky_link_frame();
return;
}

25
Multiprotocol/_Config.h
View File

@ -258,26 +258,27 @@
//Comment to invert the polarity of the output telemetry serial signal.
//This function takes quite some flash space and processor power on an atmega.
//For OpenTX it must be uncommented.
//On a 9XR_PRO running ersky9x both commented and uncommented will work depending on the radio setting Invert COM1 under the Telemetry menu.
//On other addon/replacement boards like the 9xtreme board or the Ar9x board running ersky9x, you need to uncomment the line below.
//For a Taranis/T16 with an external module it must be uncommented. For a T16 internal module it must be commented.
//A 9XR_PRO running erskyTX will work with both commented and uncommented depending on the radio setting Invert COM1 under the Telemetry menu.
//On other addon/replacement boards like the 9xtreme board or the Ar9x board running erskyTX, you need to uncomment the line below.
//For er9x it depends if you have an inveter mod or not on the telemetry pin. If you don't have an inverter comment this line.
//=>OpenTX 2.3.2 with a STM32 or OrangeRX module this setting can be ignored.
#define INVERT_TELEMETRY
//Uncomment if you don't want to send Multi status telemetry frames (Protocol available, Bind in progress, version...)
//Use with er9x/erksy9x, for OpenTX MULTI_TELEMETRY below is preferred instead
//Use with er9x/erskyTX, for OpenTX MULTI_TELEMETRY below is preferred instead
//#define MULTI_STATUS
//Sends Multi status and allow OpenTX to autodetect the telemetry format. Comment to disable.
//Supported by OpenTX version 2.2 RC9 and newer. NOT supported by er9x/ersky9x use MULTI_STATUS instead.
//Supported by OpenTX version 2.2 RC9 and newer. NOT supported by er9x/erskyTX use MULTI_STATUS instead.
#define MULTI_TELEMETRY
//Sync OpenTX frames with the current protocol timing. This feature is only available on the STM32 module. Comment to disable.
#define MULTI_SYNC
//Comment a line to disable a specific protocol telemetry
#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded by er9x, ersky9x and OpenTX
#define SPORT_TELEMETRY // Use FrSkyX format to send telemetry to TX
#define AFHDS2A_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded by ersky9x and OpenTX
#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded by er9x, erskyTX and OpenTX
#define SPORT_TELEMETRY // Use FrSkyX format to send/receive telemetry
#define AFHDS2A_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded by erskyTX and OpenTX
#define AFHDS2A_HUB_TELEMETRY // Use FrSkyD Hub format to send basic telemetry to TX like er9x
#define HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define BAYANG_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
@ -285,8 +286,8 @@
#define HUBSAN_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define NCC1701_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define CABELL_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HITEC_HUB_TELEMETRY // Use FrSkyD Hub format to send basic telemetry to the radios which can decode it like er9x, ersky9x and OpenTX
#define HITEC_FW_TELEMETRY // Under development: Forward received telemetry packets to be decoded by ersky9x and OpenTX
#define HITEC_HUB_TELEMETRY // Use FrSkyD Hub format to send basic telemetry to the radios which can decode it like er9x, erskyTX and OpenTX
#define HITEC_FW_TELEMETRY // Under development: Forward received telemetry packets to be decoded by erskyTX and OpenTX
#define SCANNER_TELEMETRY // Forward spectrum scanner data to TX
#define FRSKYX_RX_TELEMETRY // Forward channels data to TX
#define AFHDS2A_RX_TELEMETRY // Forward channels data to TX
@ -340,6 +341,10 @@
// The default value is 16 to receive all possible channels but you might want to filter some "bad" channels from the PPM frame like the ones above 6 on the Walkera PL0811.
#define MAX_PPM_CHANNELS 16
/** Telemetry **/
//Send simple FrSkyX telemetry using the FrSkyD telemetry format
#define TELEMETRY_FRSKYX_TO_FRSKYD
/** Rotary Switch Protocol Selector Settings **/
//The table below indicates which protocol to run when a specific position on the rotary switch has been selected.
//All fields and values are explained below. Everything is configurable from here like in the Serial mode.