From 2eb2d555ad55b281c4c8145c39558b02a5039daa Mon Sep 17 00:00:00 2001 From: gerrievanzyl Date: Sat, 22 Oct 2016 06:14:22 -0400 Subject: [PATCH] Update Module_BG_4-in-1.md --- docs/Module_BG_4-in-1.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/Module_BG_4-in-1.md b/docs/Module_BG_4-in-1.md index 04f1f95..f60bf9b 100644 --- a/docs/Module_BG_4-in-1.md +++ b/docs/Module_BG_4-in-1.md @@ -25,7 +25,7 @@ The assembly process is trivial but it does depend on: ###PPM interface If you are only planning on using the PPM interface with transmitter you are ready to program the module as described in Compiling and Programming the module. -###Enabling Serial interface +###Enabling Serial and Telemetry interface If you have a transmitter that can support serial communication with the board then you need to wire up the board appropriately. There are two versions of the module and the steps are slightly different. Check which module you have and based on the pictures below. If you purchased the module after June 2016 then it is likely that you have V2 module.