gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-14 03:23:15 +00:00
Code Issues Projects Releases Wiki Activity

#766 change validation of required files (#768)

Browse Source 
* #751 DSM Enhancements

 #751 DSM Forward Programming Enhancements (New GUI, etc)

* Make both work on EdgeTx and OpenTX

* #751 Turn OFF simulation by default

Distribution code with RX simulation OFF
Simulation should be only for Development

* #751 Update Readme Documentation

Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake

* #751 Fix problems With Reset RX

1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup

2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.

3. Handle RX resets properly. It needed after initial setup

* #751 Cosmetic and Show Orientation Images

#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen

* #751 add check for required libraries

Add check that the required files in DSMLIB exist

* #751

Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.

* #766

Change the way to detect that the files exist. now works on both ETX and OTX

* #766 Strange Flickering in OTX

Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem

* #766 Change way of dectecting EdgeTX

Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15

Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
This commit is contained in:
Frankie Arzu
2022-11-27 08:10:02 -06:00
committed by GitHub
parent 7052751261
commit 2e7b1dc904
4 changed files with 27 additions and 20 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua
View File

@@ -27,7 +27,7 @@
local DEBUG_ON = ... -- Get DebugON from parameters
local dsmLib = loadScript("/SCRIPTS/TOOLS/DSMLIB/DsmFwPrgLib.lua")(DEBUG_ON)
local dsmLib = assert(loadScript("/SCRIPTS/TOOLS/DSMLIB/DsmFwPrgLib.lua"))(DEBUG_ON)
local PHASE = dsmLib.PHASE
local LINE_TYPE = dsmLib.LINE_TYPE

4
Lua_scripts/DSMLIB/readme.md
View File

@@ -27,6 +27,10 @@ Please report of you have test it with other receivers to update the documentati
If you get `"Unable to Load menu lines"` when trying to navidate to a menu, could be that the code needs to be specially adapter to mandle that menu in a different way than others. We did that HACK for AR631/AR637 for the `Initial Setup` and `Initial Safe Setup` menus. Before starting the script again, the problem shouls show at the log. Usually not been able to process some `Unknown_0x5` lines who has not been fully reversed engineered (you can share the logs with us to try to understand what is going on.
# Flight mode/Gain channels
I ran into a case where trying to set Aux2 or Aux3 for flight mode, but the RX was correcting it to Aux1.. the RX only was allowing Gear or Aux1 (AR631/AR637).
This is because the RX don't know that we are using more than 6 channels. To make the RX aware that there are other channels, while edditing the channel, you have to toggle the switch to excersist the channel, and now the RX will recognize it.
# Deployment