gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:58:14 +00:00
Code Issues Projects Releases Wiki Activity

Frankie dsm fwrd prg enhancements (#773)

Browse Source 
* #751 DSM Enhancements

 #751 DSM Forward Programming Enhancements (New GUI, etc)

* Make both work on EdgeTx and OpenTX

* #751 Turn OFF simulation by default

Distribution code with RX simulation OFF
Simulation should be only for Development

* #751 Update Readme Documentation

Updated the Readme.txt documentation
and removed compiled luac file that was check in by mistake

* #751 Fix problems With Reset RX

1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup

2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works.

3. Handle RX resets properly. It needed after initial setup

* #751 Cosmetic and Show Orientation Images

#751
1. Fix problems when text contradictions between Menu/Line Headers and List Values
2. Show Images of RX orientations
3. Able to Hack getting into Initial Setup and other menus who was failing before
4. Custumize the way Flight Mode reports the Value on Screen

* #751 add check for required libraries

Add check that the required files in DSMLIB exist

* #751

Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems.

* #766

Change the way to detect that the files exist. now works on both ETX and OTX

* #766 Strange Flickering in OTX

Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem

* #766 Change way of dectecting EdgeTX

Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15

* #766  make editable Gain Values

Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers.

* #766 More enhacements

Added AR630
Make numbers right justified
Cleanup some log messages and line types.
Updated DSM FWD prog documentation

* #751 more cosmetic things

1. Added AR10360T,
2. Simplify way to configured the hack for more receivers.
3. Change some texts on menus to march spektrum
4. Background color in Spektrum theme to match

* #751 A few final changes

1. Update channel names to include channel number. i.e: Ch5 (Gear)
2,  Fix flight mode display for Heli Receiver
3. i think the unknown lines are to request info about the TX settings

Co-authored-by: pascallanger <pascal_langer@yahoo.fr>
This commit is contained in:
Frankie Arzu 2022-12-01 01:57:33 -06:00 committed by GitHub
parent 38a79c816a
commit 2da8b3c42a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 81 additions and 74 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
Lua_scripts/DSM FwdPrg_05_BW.lua
View File

@ -16,6 +16,15 @@ local toolName = "TNS|DSM Forward Prog v0.5 (Text B&W) |TNE"
---- # GNU General Public License for more details. # ---- # GNU General Public License for more details. #
---- # # ---- # #
---- ######################################################################### ---- #########################################################################
------------------------------------------------------------------------------
-- This script library is a rewrite of the original DSM forward programming Lua
-- Script. The goal is to make it easier to understand, mantain, and to
-- separate the GUI from the DSM Forward programming engine/logic
-- in this way, GUIs can evolve independent. OpenTX Gui, EdgeTx GUI, Small Radios, etc.
-- Code is based on the code/work by: Pascal Langer (Author of the Multi-Module)
-- Rewrite/Enhancements By: Francisco Arzu
------------------------------------------------------------------------------
local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX
local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log) local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log)

9
Lua_scripts/DSM FwdPrg_05_Color.lua
View File

@ -17,6 +17,15 @@ local VERSION = "v0.5"
---- # GNU General Public License for more details. # ---- # GNU General Public License for more details. #
---- # # ---- # #
---- ######################################################################### ---- #########################################################################
------------------------------------------------------------------------------
-- This script library is a rewrite of the original DSM forward programming Lua
-- Script. The goal is to make it easier to understand, mantain, and to
-- separate the GUI from the DSM Forward programming engine/logic
-- in this way, GUIs can evolve independent. OpenTX Gui, EdgeTx GUI, Small Radios, etc.
-- Code is based on the code/work by: Pascal Langer (Author of the Multi-Module)
-- Rewrite/Enhancements By: Francisco Arzu
------------------------------------------------------------------------------
local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX
local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log) local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log)

117
Lua_scripts/DSMLIB/DsmFwPrgLib.lua
View File

@ -65,7 +65,7 @@ local PHASE = {
RX_VERSION = 0, RX_VERSION = 0,
WAIT_CMD = 1, WAIT_CMD = 1,
MENU_TITLE = 2, MENU_TITLE = 2,
MENU_UNKNOWN_LINES = 3, MENU_REQ_TX_INFO = 3,
MENU_LINES = 4, MENU_VALUES = 5, MENU_LINES = 4, MENU_VALUES = 5,
VALUE_CHANGING = 6, VALUE_CHANGING_WAIT = 7, VALUE_CHANGE_END = 8, VALUE_CHANGING = 6, VALUE_CHANGING_WAIT = 7, VALUE_CHANGE_END = 8,
EXIT = 9, EXIT_DONE = 10 EXIT = 9, EXIT_DONE = 10
@ -657,12 +657,14 @@ end
local function DSM_validateMenuValue(valId, text, line) local function DSM_validateMenuValue(valId, text, line)
if (DEBUG_ON) then LOG_write("SEND DSM_validateMenuValue(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end if (DEBUG_ON) then LOG_write("SEND DSM_validateMenuValue(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end
DSM_send(0x19, 0x06, int16_MSB(valId), int16_LSB(valId)) -- validate DSM_send(0x19, 0x06, int16_MSB(valId), int16_LSB(valId))
-- Pascal: i think the 2nd byte is the leghts of the entire message in bytes, so instead of 0x06, should be 0x04 for here.. work both ways
end end
local function DSM_menuValueChangingWait(valId, text, line) local function DSM_menuValueChangingWait(valId, text, line)
if (DEBUG_ON) then LOG_write("SEND DSM_menuValueChangingWait(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end if (DEBUG_ON) then LOG_write("SEND DSM_menuValueChangingWait(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end
DSM_send(0x1A, 0x06, int16_MSB(valId), int16_LSB(valId)) DSM_send(0x1A, 0x06, int16_MSB(valId), int16_LSB(valId))
-- Pascal: i think the 2nd byte is the leghts of the entire message in bytes, so instead of 0x06, should be 0x04 for here.. work both ways
end end
----------------------------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------------------------
@ -682,23 +684,23 @@ local function DSM_SelLine_HACK()
-- Tested to work on the RX: AR631, AR637T, AR637TA -- Tested to work on the RX: AR631, AR637T, AR637TA
local ctx = DSM_Context local ctx = DSM_Context
-- AR631/AR637 Family: Hack for "First time Setup" or "First Time AS3X Setup", use 0 instead of the ctx.SelLine
if (ctx.Menu.MenuId == 0x104F or ctx.Menu.MenuId==0x1055) and -- AR631/AR637 Family: Hack for "First time Setup" or "First Time AS3X Setup", use 0 instead of the ctx.SelLine
(FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED)) then if (ctx.Menu.MenuId == 0x104F or ctx.Menu.MenuId==0x1055) and
if (DEBUG_ON) then LOG_write("First time Setup Menu HACK: Overrideing LastSelectedLine to ZERO\n") end (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED)) then
if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end if (DEBUG_ON) then LOG_write("First time Setup Menu HACK: Overrideing LastSelectedLine to ZERO\n") end
ctx.SelLine = 0 if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end
end ctx.SelLine = 0
end
-- AR631/AR637 Hack for "Relearn Servo Settings", use 1 instead of the ctx.SelLine=0
-- AR631/AR637 Hack for "Relearn Servo Settings", use 1 instead of the ctx.SelLine=0 -- REMOVE THE FIX FOR NOW.. Locks the Servos
-- REMOVE THE FIX FOR NOW.. Locks the Servos --if (ctx.Menu.MenuId == 0x1023 and
--if (ctx.Menu.MenuId == 0x1023 and -- (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED))) then
-- (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED))) then -- if (DEBUG_ON) then LOG_write("Relearn Servo Settings HACK: Overrideing LastSelectedLine to 1\n") end
-- if (DEBUG_ON) then LOG_write("Relearn Servo Settings HACK: Overrideing LastSelectedLine to 1\n") end -- if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end
-- if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end -- ctx.SelLine = 1
-- ctx.SelLine = 1 --end
--end
end end
local function DSM_sendRequest() local function DSM_sendRequest()
@ -729,11 +731,14 @@ local function DSM_sendRequest()
end end
end end
elseif ctx.Phase == PHASE.MENU_UNKNOWN_LINES then -- Still trying to figure out what are this menu lines are for elseif ctx.Phase == PHASE.MENU_REQ_TX_INFO then
-- Guessing: Trying to Request TX info: Model Type, Wing Type, Tail (normal/V), Aileron Sevos (1/2), etc
local curLine = ctx.CurLine local curLine = ctx.CurLine
if (DEBUG_ON) then LOG_write("CALL DSM_getNextUknownLine_0x05(LastLine=%s)\n", curLine) end if (DEBUG_ON) then LOG_write("CALL DSM_getNextUknownLine_0x05: LastLine=%s ", curLine) end
local last_byte = { 0x40, 0x01, 0x02, 0x04, 0x00, 0x00 } -- unknown... local last_byte = { 0x40, 0x01, 0x02, 0x04, 0x00, 0x00 } -- unknown.
DSM_send(0x20, 0x06, curLine, curLine, 0x00, last_byte[curLine + 1]) -- line X DSM_send(0x20, 0x06, curLine, curLine, 0x00, last_byte[curLine + 1]) -- line X
if (DEBUG_ON) then LOG_write("DATA=TX: 20 06 %02X %02X %02X %02X\n", curLine, curLine, 0, last_byte[curLine + 1]) end
elseif ctx.Phase == PHASE.MENU_LINES then -- request next menu lines elseif ctx.Phase == PHASE.MENU_LINES then -- request next menu lines
if ctx.CurLine == -1 then -- No previous menu line loaded ? if ctx.CurLine == -1 then -- No previous menu line loaded ?
@ -952,7 +957,7 @@ local function DSM_processResponse()
DSM_parseMenuValue() DSM_parseMenuValue()
ctx.Phase = PHASE.MENU_VALUES ctx.Phase = PHASE.MENU_VALUES
elseif cmd == 0x05 then -- unknown... need to get through the lines... elseif cmd == 0x05 then -- unknown... I think is trying to request info about TX (Wing type, etc)
-- 0x09 0x05 0x01 0x01 0x00 0x00 0x00 0x00 0x07 -- 0x09 0x05 0x01 0x01 0x00 0x00 0x00 0x00 0x07
-- Line MenuId ???? -- Line MenuId ????
local curLine = multiBuffer(12) local curLine = multiBuffer(12)
@ -967,7 +972,7 @@ local function DSM_processResponse()
end -- Got the next line.. keep requesting more end -- Got the next line.. keep requesting more
ctx.CurLine = curLine ctx.CurLine = curLine
ctx.Phase = PHASE.MENU_UNKNOWN_LINES ctx.Phase = PHASE.MENU_REQ_TX_INFO
elseif cmd == 0xA7 then -- answer to EXIT command elseif cmd == 0xA7 then -- answer to EXIT command
if (DEBUG_ON) then LOG_write("RESPONSE Exit Confirm\n") end if (DEBUG_ON) then LOG_write("RESPONSE Exit Confirm\n") end
@ -1060,7 +1065,7 @@ local function DSM_Init(toolName)
PhaseText[PHASE.RX_VERSION] = "RX_VERSION" PhaseText[PHASE.RX_VERSION] = "RX_VERSION"
PhaseText[PHASE.WAIT_CMD] = "WAIT_CMD" PhaseText[PHASE.WAIT_CMD] = "WAIT_CMD"
PhaseText[PHASE.MENU_TITLE] = "MENU_TITLE" PhaseText[PHASE.MENU_TITLE] = "MENU_TITLE"
PhaseText[PHASE.MENU_UNKNOWN_LINES] = "MENU_UNKNOWN_LINES" PhaseText[PHASE.MENU_REQ_TX_INFO] = "MENU_REQ_TX_INFO"
PhaseText[PHASE.MENU_LINES] = "MENU_LINES" PhaseText[PHASE.MENU_LINES] = "MENU_LINES"
PhaseText[PHASE.MENU_VALUES] = "MENU_VALUES" PhaseText[PHASE.MENU_VALUES] = "MENU_VALUES"
PhaseText[PHASE.VALUE_CHANGING] = "VALUE_CHANGING" PhaseText[PHASE.VALUE_CHANGING] = "VALUE_CHANGING"
@ -1124,8 +1129,8 @@ local function DSM_Init_Text(rxId)
-- Channel selection for SAFE MODE and GAINS on FC6250HX -- Channel selection for SAFE MODE and GAINS on FC6250HX
List_Text[0x000C] = "Inhibit?" --? List_Text[0x000C] = "Inhibit?" --?
List_Text[0x000D] = "Gear" List_Text[0x000D] = "Ch5 (Gear)"
for i = 1, 7 do List_Text[0x000D + i] = "Aux" .. i end -- Aux channels for i = 1, 7 do List_Text[0x000D + i] = "Ch"..(i+5) .. " (Aux" .. i .. ")" end -- Aux channels
-- Servo Output values.. -- Servo Output values..
local servoOutputValues = {0x0003,0x002D,0x002E,0x002F} --Inh (GAP), 5.5ms, 11ms, 22ms. Fixing L_m1 with 0..244 range! local servoOutputValues = {0x0003,0x002D,0x002E,0x002F} --Inh (GAP), 5.5ms, 11ms, 22ms. Fixing L_m1 with 0..244 range!
@ -1144,16 +1149,16 @@ local function DSM_Init_Text(rxId)
-- Valid Values: Inhibit? (GAP), Gear,Aux1..Aux7,X-Plus-1..XPlus-8 -- Valid Values: Inhibit? (GAP), Gear,Aux1..Aux7,X-Plus-1..XPlus-8
local channelValues = {0x0035,0x003A,0x003B,0x003C,0x003D,0x003E,0x003F,0x0040,0x0041,0x0042,0x0043,0x0044,0x0045,0x0046,0x0047,0x0048,0x0049} local channelValues = {0x0035,0x003A,0x003B,0x003C,0x003D,0x003E,0x003F,0x0040,0x0041,0x0042,0x0043,0x0044,0x0045,0x0046,0x0047,0x0048,0x0049}
List_Text[0x0035] = "Inhibit?" --? List_Text[0x0035] = "Inhibit?"
List_Text[0x0036] = "Throttle" List_Text[0x0036] = "Throttle"
List_Text[0x0037] = "Aileron" List_Text[0x0037] = "Aileron"
List_Text[0x0038] = "Elevator" List_Text[0x0038] = "Elevator"
List_Text[0x0039] = "Rudder" List_Text[0x0039] = "Rudder"
List_Text[0x003A] = "Gear" List_Text[0x003A] = "Ch5 (Gear)"
for i = 1, 7 do List_Text[0x003A + i] = "Aux" .. i end -- Aux channels on AR637T for i = 1, 7 do List_Text[0x003A + i] = "Ch"..(i+5) .. " (Aux" .. i .. ")" end -- Aux channels on AR637T
for i = 1, 8 do -- 41..49 on AR637T -- This don't seem OK for i = 1, 8 do -- 41..49
List_Text[0x0041 + i] = "XPlus-" .. i List_Text[0x0041 + i] = "Ch"..(i+13) .." (XPlus-" .. i .. ")"
end end
-- ****No longer overrides of previous XPlus values, since using different array -- ****No longer overrides of previous XPlus values, since using different array
@ -1215,7 +1220,8 @@ local function DSM_Init_Text(rxId)
-- Gain channel selection -- Gain channel selection
Text[0x0089] = "Gain Channel" Text[0x0089] = "Gain Channel"
if (rxId ~= RX.FC6250HX) then List_Values[0x0089]=channelValues end --FC6250HX uses other range if (rxId ~= RX.FC6250HX) then List_Values[0x0089]=channelValues end --FC6250HX uses other range
-- Gain Sensitivity
-- Gain Sensitivity selection
Text[0x008A] = "Gain Sensitivity/r"; List_Values[0x008A]=gainValues -- Right Alight, (L_M1 was wide open range 0->244) Text[0x008A] = "Gain Sensitivity/r"; List_Values[0x008A]=gainValues -- Right Alight, (L_M1 was wide open range 0->244)
Text[0x008B] = "Panic" Text[0x008B] = "Panic"
@ -1233,28 +1239,20 @@ local function DSM_Init_Text(rxId)
Text[0x009A] = "Capture Failsafe Positions" Text[0x009A] = "Capture Failsafe Positions"
Text[0x009C] = "Custom Failsafe" Text[0x009C] = "Custom Failsafe"
Text[0x009F] = "Save Settings" Text[0x009F] = "Save Settings " -- Save & Reboot RX
Text[0x00A5] = "First Time Setup" Text[0x00A5] = "First Time Setup"
Text[0x00AA] = "Capture Gyro Gains" Text[0x00AA] = "Capture Gyro Gains"
Text[0x00AD] = "Gain Channel Select" Text[0x00AD] = "Gain Channel Select"
-- Safe mode options, Ihnibit + thi values -- Safe mode options, Ihnibit + this values
local safeModeOptions = {0x0003,0x00B0,0x00B1} -- inh (gap), "Self-Level/Angle Dem, Envelope local safeModeOptions = {0x0003,0x00B0,0x00B1} -- inh (gap), "Self-Level/Angle Dem, Envelope
List_Text[0x00B0] = "Self-Level/Angle Dem" List_Text[0x00B0] = "Self-Level/Angle Dem"
List_Text[0x00B1] = "Envelope" List_Text[0x00B1] = "Envelope"
-- Flight Modes List Options
List_Text[0x00B5] = "Inhibit" List_Text[0x00B5] = "Inhibit"
List_Text[0x00B6] = "FM1" for i = 1, 10 do List_Text[0x00B5 + i] = "Flight Mode " .. i end
List_Text[0x00B7] = "FM2"
List_Text[0x00B8] = "FM3"
List_Text[0x00B9] = "FM4"
List_Text[0x00BA] = "FM5"
List_Text[0x00BB] = "FM6"
List_Text[0x00BC] = "FM7"
List_Text[0x00BD] = "FM8"
List_Text[0x00BE] = "FM9"
List_Text[0x00BF] = "FM10"
Text[0x00BE] = "Unknown_BE" -- Used in Reset menu (0x0001) while the RX is rebooting Text[0x00BE] = "Unknown_BE" -- Used in Reset menu (0x0001) while the RX is rebooting
@ -1263,8 +1261,8 @@ local function DSM_Init_Text(rxId)
Text[0x00CA] = "SAFE/Panic Mode Setup" Text[0x00CA] = "SAFE/Panic Mode Setup"
Text[0x00CD] = "Level model and capture attiude/M"; -- Different from List_Text , and force it to be a menu button Text[0x00CD] = "Level model and capture attiude/M"; -- Different from List_Text , and force it to be a menu button
-- RX Orientations for AR631/AR637
-- Optionally attach an Image to display -- RX Orientations for AR631/AR637, Optionally attach an Image + Alt Text to display
List_Text[0x00CB] = "Position 1"; List_Text_Img[0x00CB] = "rx_pos_1.png|Pilot View: RX Label Up, Pins Back" List_Text[0x00CB] = "Position 1"; List_Text_Img[0x00CB] = "rx_pos_1.png|Pilot View: RX Label Up, Pins Back"
List_Text[0x00CC] = "Position 2"; List_Text_Img[0x00CC] = "rx_pos_2.png|Pilot View: RX Label Left, Pins Back" List_Text[0x00CC] = "Position 2"; List_Text_Img[0x00CC] = "rx_pos_2.png|Pilot View: RX Label Left, Pins Back"
List_Text[0x00CD] = "Position 3"; List_Text_Img[0x00CD] = "rx_pos_3.png|Pilot View: RX Label Down, Pins Back" List_Text[0x00CD] = "Position 3"; List_Text_Img[0x00CD] = "rx_pos_3.png|Pilot View: RX Label Down, Pins Back"
@ -1313,6 +1311,7 @@ local function DSM_Init_Text(rxId)
Text[0x00E7] = "Left" Text[0x00E7] = "Left"
Text[0x00E8] = "Right" Text[0x00E8] = "Right"
-- Gain Capture options
List_Text[0x00F2] = "Fixed" List_Text[0x00F2] = "Fixed"
List_Text[0x00F3] = "Adjustable" List_Text[0x00F3] = "Adjustable"
@ -1355,7 +1354,7 @@ local function DSM_Init_Text(rxId)
Text[0x01F4] = "Angle" Text[0x01F4] = "Angle"
Text[0x01F6] = "Failsafe Angles/c/b" -- SubTitle, Center+bold Text[0x01F6] = "Failsafe Angles/c/b" -- SubTitle, Center+bold
--Inh, Self-Level/Angle Dem, Envelope -- (L_M1 was wide open) --Inh, Self-Level/Angle Dem, Envelope -- (L_M was wide open range 0->244)
Text[0x01F8] = "Safe Mode"; List_Values[0x01F8]=safeModeOptions Text[0x01F8] = "Safe Mode"; List_Values[0x01F8]=safeModeOptions
Text[0x01F9] = "SAFE Select/c/b " -- SubTitle Text[0x01F9] = "SAFE Select/c/b " -- SubTitle
@ -1374,11 +1373,13 @@ local function DSM_Init_Text(rxId)
Text[0x0212] = "" -- empty Text[0x0212] = "" -- empty
Text[0x0213] = "" -- empty Text[0x0213] = "" -- empty
-- AS3X orientation Setting menu (Level)
Text[0x021A] = "Set the model level," Text[0x021A] = "Set the model level,"
Text[0x021B] = "and press Continue." Text[0x021B] = "and press Continue."
Text[0x021C] = "" -- empty?? Text[0x021C] = "" -- empty??
Text[0x021D] = "" -- empty?? Text[0x021D] = "" -- empty??
-- AS3X orientation Setting menu (Nose down)
Text[0x021F] = "Set the model on its nose," Text[0x021F] = "Set the model on its nose,"
Text[0x0220] = "and press Continue. If the" Text[0x0220] = "and press Continue. If the"
Text[0x0221] = "orientation on the next" Text[0x0221] = "orientation on the next"
@ -1412,15 +1413,16 @@ local function DSM_Init_Text(rxId)
Text[0x0239] = "the backup memory." Text[0x0239] = "the backup memory."
Text[0x023A] = "" -- blank line Text[0x023A] = "" -- blank line
-- Utilities Copy flight modes
Text[0x023D] = "Copy Flight Mode Settings" Text[0x023D] = "Copy Flight Mode Settings"
Text[0x023E] = "Source Flight Mode" Text[0x023E] = "Source Flight Mode"
Text[0x023F] = "Target Flight Mode" Text[0x023F] = "Target Flight Mode"
Text[0x0240] = "Utilities" Text[0x0240] = "Utilities"
-- Gain Capture Page
Text[0x024C] = "Gains will be captured on" Text[0x024C] = "Gains will be captured on"
Text[0x024D] = "Captured gains will be" Text[0x024D] = "Captured gains will be"
Text[0x024E] = "Gains on" Text[0x024E] = "Gains on"
Text[0x024F] = "were captured and changed" Text[0x024F] = "were captured and changed"
Text[0x0250] = "from Adjustable to Fixed" Text[0x0250] = "from Adjustable to Fixed"
@ -1458,24 +1460,25 @@ local function DSM_Init_Text(rxId)
Text[0x8000] = "Flight Mode/c/b" --FC6250HX: 1=NORMAL 2= Stunt-1, 3=Stunt-2, 4=Hold Text[0x8000] = "Flight Mode/c/b" --FC6250HX: 1=NORMAL 2= Stunt-1, 3=Stunt-2, 4=Hold
Text[0x8001] = "Flight Mode/c/b" -- WAS "Flight Mode 1".. This usually is a Flight Mode w value relative to 0 (AR631/AR637) Text[0x8001] = "Flight Mode/c/b" -- WAS "Flight Mode 1".. This usually is a Flight Mode w value relative to 0 (AR631/AR637)
Text[0x8002] = "Flight Mode 2/c/b" Text[0x8002] = "Flight Mode 2/c/b" -- what RX does this show up??
Text[0x8003] = "Flight Mode 3/c/b" Text[0x8003] = "Flight Mode 3/c/b"
end end
-- Adjust the displayed value for Flight mode as needed -- Adjust the displayed value for Flight mode line as needed
local function GetFlightModeValue(line) local function GetFlightModeValue(line)
local value = line.Val local value = line.Val or 0 -- protect when in the middle of changing FM can be nil
local textId = line.TextId local textId = line.TextId
local header = line.Text local header = line.Text
local out = value local out = value .. ""
if (textId == 0x8000) then -- FC6250HX if (textId == 0x8000) then -- FC6250HX
if (DSM_Context.RX.Id == RX.FC6250HX) then if (DSM_Context.RX.Id == RX.FC6250HX) then
-- Helicopter Flights modes -- Helicopter Flights modes
if (value==1) then out = header .. " 1 / Normal" if (value==0) then out = header .. " 1 / Normal 1"
elseif (value==2) then out = header .. " 2 / Stunt 1" elseif (value==1) then out = header .. " 2 / Normal 2"
elseif (value==3) then out = header .. " 3 / Stunt 2" elseif (value==2) then out = header .. " 3 / Stunt 1"
elseif (value==4) then out = header .. " 4 / Hold" elseif (value==3) then out = header .. " 4 / Stunt 2"
elseif (value==4) then out = header .. " 5 / Hold"
else else
out = header .. " " .. value out = header .. " " .. value
end end
@ -1483,7 +1486,7 @@ local function GetFlightModeValue(line)
-- No adjustment needed -- No adjustment needed
out = header .. " " .. value out = header .. " " .. value
end end
elseif (textId == 0x8001) then -- AR632/637 elseif (textId == 0x8001) then -- AR630-637, AR8360T, AR10360T
-- Seems that we really have to add +1 to the value, so Flight Mode 0 is Really Flight Mode 1 -- Seems that we really have to add +1 to the value, so Flight Mode 0 is Really Flight Mode 1
out = header .. " " .. (value + 1) out = header .. " " .. (value + 1)
else else

20
Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua
View File

@ -102,6 +102,8 @@ local function AR631_loadMenu(menuId)
-- L[#1 T=M VId=0x1019 Text="SAFE Settings"[0x1E2] MId=0x1010 ] -- L[#1 T=M VId=0x1019 Text="SAFE Settings"[0x1E2] MId=0x1010 ]
-- L[#2 T=M VId=0x1021 Text="F-Mode Setup"[0x87] MId=0x1010 ] -- L[#2 T=M VId=0x1021 Text="F-Mode Setup"[0x87] MId=0x1010 ]
-- L[#3 T=M VId=0x1022 Text="System Setup"[0x86] MId=0x1010 ] -- L[#3 T=M VId=0x1022 Text="System Setup"[0x86] MId=0x1010 ]
-- Only on BNF locked receivers
-- L[#4 T=M VId=0x105C Text="SAFE Select "[0x1F9] MId=0x1010 ]
ctx.Menu = { MenuId = 0x1010, TextId = 0x00F9, PrevId = 0, NextId = 0, BackId = 0x1000 } ctx.Menu = { MenuId = 0x1010, TextId = 0x00F9, PrevId = 0, NextId = 0, BackId = 0x1000 }
@ -114,6 +116,7 @@ local function AR631_loadMenu(menuId)
ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, TextId = 0x01E2, ValId = 0x1019 } ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, TextId = 0x01E2, ValId = 0x1019 }
ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, TextId = 0x0087, ValId = 0x1021 } ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, TextId = 0x0087, ValId = 0x1021 }
ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, TextId = 0x0086, ValId = 0x1022 } ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, TextId = 0x0086, ValId = 0x1022 }
ctx.MenuLines[4] = { Type = LINE_TYPE.MENU, TextId = 0x01F9, ValId = 0x105C }
ctx.SelLine = 0 ctx.SelLine = 0
end end
lastGoodMenu = menuId lastGoodMenu = menuId
@ -647,23 +650,6 @@ local function AR631_loadMenu(menuId)
ctx.SelLine = 2 ctx.SelLine = 2
lastGoodMenu = menuId lastGoodMenu = menuId
elseif (menuId==0x1051) then
--M[Id=0x1051 P=0x0 N=0x0 B=0x1010 Text="First Time Setup"]
--L[#0 T=M VId=0x1051 Text="Set the model level," MId=0x1051 ]
--L[#1 T=M VId=0x1051 Text="and press Continue." MId=0x1051 ]
--L[#2 T=M VId=0x1051 Text="" MId=0x1051 ]
--L[#5 T=M VId=0x1052 Text="Continue" MId=0x1051 ]
--L[#6 T=M VId=0x1053 Text="Set Orientation Manually" MId=0x1051 ]
ctx.Menu = { MenuId = 0x1051, TextId = 0x00F9, PrevId = 0, NextId = 0, BackId = 0x1010 }
ctx.MenuLines[0] = { Type = LINE_TYPE.MENU, TextId = 0x021A, ValId = 0x1051 }
ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, TextId = 0x021B, ValId = 0x1051 }
ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, TextId = 0x021C, ValId = 0x1051 }
ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, TextId = 0x0224, ValId = 0x1052 }
ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, TextId = 0x0229, ValId = 0x1053 }
ctx.SelLine = 5
lastGoodMenu = menuId
elseif (menuId==0x104F) then elseif (menuId==0x104F) then
--M[Id=0x104F P=0x0 N=0x1050 B=0x1010 Text="First Time Setup"] --M[Id=0x104F P=0x0 N=0x1050 B=0x1010 Text="First Time Setup"]
--L[#0 T=M VId=0x104F Text="Make sure the model has been" MId=0x104F ] --L[#0 T=M VId=0x104F Text="Make sure the model has been" MId=0x104F ]