From 2da8b3c42afa56105dbe6089c3f20eb53a571b3a Mon Sep 17 00:00:00 2001 From: Frankie Arzu <32604366+frankiearzu@users.noreply.github.com> Date: Thu, 1 Dec 2022 01:57:33 -0600 Subject: [PATCH] Frankie dsm fwrd prg enhancements (#773) * #751 DSM Enhancements #751 DSM Forward Programming Enhancements (New GUI, etc) * Make both work on EdgeTx and OpenTX * #751 Turn OFF simulation by default Distribution code with RX simulation OFF Simulation should be only for Development * #751 Update Readme Documentation Updated the Readme.txt documentation and removed compiled luac file that was check in by mistake * #751 Fix problems With Reset RX 1. Fix problem when trying to Factory Reset. Enter Bind Mode. Save backup, Restore Backup 2. Found a way to advance on the Gyro initial Setup menus.. a bit of a hack, but works. 3. Handle RX resets properly. It needed after initial setup * #751 Cosmetic and Show Orientation Images #751 1. Fix problems when text contradictions between Menu/Line Headers and List Values 2. Show Images of RX orientations 3. Able to Hack getting into Initial Setup and other menus who was failing before 4. Custumize the way Flight Mode reports the Value on Screen * #751 add check for required libraries Add check that the required files in DSMLIB exist * #751 Write documentation about the protocol so that we don't forget later what we know, and enable others to understand the logs and maybe help solve problems. * #766 Change the way to detect that the files exist. now works on both ETX and OTX * #766 Strange Flickering in OTX Strange Flickering happening on OTX. Refreshing the screen on every cycle fixed the problem * #766 Change way of dectecting EdgeTX Change way of detecting OTX in multiple versions: OTX 2.3.14 and 2.3.15 * #766 make editable Gain Values Gains and other settings should be editable even when they are VALUE_NOCHANGING. Flight Mode is an exception that is handled properly. Right align numbers. * #766 More enhacements Added AR630 Make numbers right justified Cleanup some log messages and line types. Updated DSM FWD prog documentation * #751 more cosmetic things 1. Added AR10360T, 2. Simplify way to configured the hack for more receivers. 3. Change some texts on menus to march spektrum 4. Background color in Spektrum theme to match * #751 A few final changes 1. Update channel names to include channel number. i.e: Ch5 (Gear) 2, Fix flight mode display for Heli Receiver 3. i think the unknown lines are to request info about the TX settings Co-authored-by: pascallanger --- Lua_scripts/DSM FwdPrg_05_BW.lua | 9 ++ Lua_scripts/DSM FwdPrg_05_Color.lua | 9 ++ Lua_scripts/DSMLIB/DsmFwPrgLib.lua | 117 +++++++++++++------------- Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua | 20 +---- 4 files changed, 81 insertions(+), 74 deletions(-) diff --git a/Lua_scripts/DSM FwdPrg_05_BW.lua b/Lua_scripts/DSM FwdPrg_05_BW.lua index 4aabceb..9a97cbb 100644 --- a/Lua_scripts/DSM FwdPrg_05_BW.lua +++ b/Lua_scripts/DSM FwdPrg_05_BW.lua @@ -16,6 +16,15 @@ local toolName = "TNS|DSM Forward Prog v0.5 (Text B&W) |TNE" ---- # GNU General Public License for more details. # ---- # # ---- ######################################################################### +------------------------------------------------------------------------------ +-- This script library is a rewrite of the original DSM forward programming Lua +-- Script. The goal is to make it easier to understand, mantain, and to +-- separate the GUI from the DSM Forward programming engine/logic +-- in this way, GUIs can evolve independent. OpenTX Gui, EdgeTx GUI, Small Radios, etc. + +-- Code is based on the code/work by: Pascal Langer (Author of the Multi-Module) +-- Rewrite/Enhancements By: Francisco Arzu +------------------------------------------------------------------------------ local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log) diff --git a/Lua_scripts/DSM FwdPrg_05_Color.lua b/Lua_scripts/DSM FwdPrg_05_Color.lua index a361170..d4faa7a 100644 --- a/Lua_scripts/DSM FwdPrg_05_Color.lua +++ b/Lua_scripts/DSM FwdPrg_05_Color.lua @@ -17,6 +17,15 @@ local VERSION = "v0.5" ---- # GNU General Public License for more details. # ---- # # ---- ######################################################################### +------------------------------------------------------------------------------ +-- This script library is a rewrite of the original DSM forward programming Lua +-- Script. The goal is to make it easier to understand, mantain, and to +-- separate the GUI from the DSM Forward programming engine/logic +-- in this way, GUIs can evolve independent. OpenTX Gui, EdgeTx GUI, Small Radios, etc. + +-- Code is based on the code/work by: Pascal Langer (Author of the Multi-Module) +-- Rewrite/Enhancements By: Francisco Arzu +------------------------------------------------------------------------------ local SIMULATION_ON = false -- FALSE: use real communication to DSM RX (DEFAULT), TRUE: use a simulated version of RX local DEBUG_ON = 1 -- 0=NO DEBUG, 1=HIGH LEVEL 2=LOW LEVEL (Debug logged into the /LOGS/dsm.log) diff --git a/Lua_scripts/DSMLIB/DsmFwPrgLib.lua b/Lua_scripts/DSMLIB/DsmFwPrgLib.lua index 72b5f3a..8ae2b2d 100644 --- a/Lua_scripts/DSMLIB/DsmFwPrgLib.lua +++ b/Lua_scripts/DSMLIB/DsmFwPrgLib.lua @@ -65,7 +65,7 @@ local PHASE = { RX_VERSION = 0, WAIT_CMD = 1, MENU_TITLE = 2, - MENU_UNKNOWN_LINES = 3, + MENU_REQ_TX_INFO = 3, MENU_LINES = 4, MENU_VALUES = 5, VALUE_CHANGING = 6, VALUE_CHANGING_WAIT = 7, VALUE_CHANGE_END = 8, EXIT = 9, EXIT_DONE = 10 @@ -657,12 +657,14 @@ end local function DSM_validateMenuValue(valId, text, line) if (DEBUG_ON) then LOG_write("SEND DSM_validateMenuValue(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end - DSM_send(0x19, 0x06, int16_MSB(valId), int16_LSB(valId)) -- validate + DSM_send(0x19, 0x06, int16_MSB(valId), int16_LSB(valId)) + -- Pascal: i think the 2nd byte is the leghts of the entire message in bytes, so instead of 0x06, should be 0x04 for here.. work both ways end local function DSM_menuValueChangingWait(valId, text, line) if (DEBUG_ON) then LOG_write("SEND DSM_menuValueChangingWait(ValueId=0x%X) Extra: Text=\"%s\" Value=%s\n", valId, text, lineValue2String(line)) end DSM_send(0x1A, 0x06, int16_MSB(valId), int16_LSB(valId)) + -- Pascal: i think the 2nd byte is the leghts of the entire message in bytes, so instead of 0x06, should be 0x04 for here.. work both ways end ----------------------------------------------------------------------------------------------------------- @@ -682,23 +684,23 @@ local function DSM_SelLine_HACK() -- Tested to work on the RX: AR631, AR637T, AR637TA local ctx = DSM_Context - -- AR631/AR637 Family: Hack for "First time Setup" or "First Time AS3X Setup", use 0 instead of the ctx.SelLine - if (ctx.Menu.MenuId == 0x104F or ctx.Menu.MenuId==0x1055) and - (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED)) then - if (DEBUG_ON) then LOG_write("First time Setup Menu HACK: Overrideing LastSelectedLine to ZERO\n") end - if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end - ctx.SelLine = 0 - end + + -- AR631/AR637 Family: Hack for "First time Setup" or "First Time AS3X Setup", use 0 instead of the ctx.SelLine + if (ctx.Menu.MenuId == 0x104F or ctx.Menu.MenuId==0x1055) and + (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED)) then + if (DEBUG_ON) then LOG_write("First time Setup Menu HACK: Overrideing LastSelectedLine to ZERO\n") end + if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end + ctx.SelLine = 0 + end - - -- AR631/AR637 Hack for "Relearn Servo Settings", use 1 instead of the ctx.SelLine=0 - -- REMOVE THE FIX FOR NOW.. Locks the Servos - --if (ctx.Menu.MenuId == 0x1023 and - -- (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED))) then - -- if (DEBUG_ON) then LOG_write("Relearn Servo Settings HACK: Overrideing LastSelectedLine to 1\n") end - -- if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end - -- ctx.SelLine = 1 - --end + -- AR631/AR637 Hack for "Relearn Servo Settings", use 1 instead of the ctx.SelLine=0 + -- REMOVE THE FIX FOR NOW.. Locks the Servos + --if (ctx.Menu.MenuId == 0x1023 and + -- (FORCED_HACK or DSM_RX_Match(ctx.RX.Id,RX_HACK_TESTED))) then + -- if (DEBUG_ON) then LOG_write("Relearn Servo Settings HACK: Overrideing LastSelectedLine to 1\n") end + -- if (DEBUG_ON) then LOG_write("%3.3f %s: ", getElapsedTime(), phase2String(ctx.Phase)) end + -- ctx.SelLine = 1 + --end end local function DSM_sendRequest() @@ -729,11 +731,14 @@ local function DSM_sendRequest() end end - elseif ctx.Phase == PHASE.MENU_UNKNOWN_LINES then -- Still trying to figure out what are this menu lines are for + elseif ctx.Phase == PHASE.MENU_REQ_TX_INFO then + -- Guessing: Trying to Request TX info: Model Type, Wing Type, Tail (normal/V), Aileron Sevos (1/2), etc local curLine = ctx.CurLine - if (DEBUG_ON) then LOG_write("CALL DSM_getNextUknownLine_0x05(LastLine=%s)\n", curLine) end - local last_byte = { 0x40, 0x01, 0x02, 0x04, 0x00, 0x00 } -- unknown... + if (DEBUG_ON) then LOG_write("CALL DSM_getNextUknownLine_0x05: LastLine=%s ", curLine) end + local last_byte = { 0x40, 0x01, 0x02, 0x04, 0x00, 0x00 } -- unknown. DSM_send(0x20, 0x06, curLine, curLine, 0x00, last_byte[curLine + 1]) -- line X + if (DEBUG_ON) then LOG_write("DATA=TX: 20 06 %02X %02X %02X %02X\n", curLine, curLine, 0, last_byte[curLine + 1]) end + elseif ctx.Phase == PHASE.MENU_LINES then -- request next menu lines if ctx.CurLine == -1 then -- No previous menu line loaded ? @@ -952,7 +957,7 @@ local function DSM_processResponse() DSM_parseMenuValue() ctx.Phase = PHASE.MENU_VALUES - elseif cmd == 0x05 then -- unknown... need to get through the lines... + elseif cmd == 0x05 then -- unknown... I think is trying to request info about TX (Wing type, etc) -- 0x09 0x05 0x01 0x01 0x00 0x00 0x00 0x00 0x07 -- Line MenuId ???? local curLine = multiBuffer(12) @@ -967,7 +972,7 @@ local function DSM_processResponse() end -- Got the next line.. keep requesting more ctx.CurLine = curLine - ctx.Phase = PHASE.MENU_UNKNOWN_LINES + ctx.Phase = PHASE.MENU_REQ_TX_INFO elseif cmd == 0xA7 then -- answer to EXIT command if (DEBUG_ON) then LOG_write("RESPONSE Exit Confirm\n") end @@ -1060,7 +1065,7 @@ local function DSM_Init(toolName) PhaseText[PHASE.RX_VERSION] = "RX_VERSION" PhaseText[PHASE.WAIT_CMD] = "WAIT_CMD" PhaseText[PHASE.MENU_TITLE] = "MENU_TITLE" - PhaseText[PHASE.MENU_UNKNOWN_LINES] = "MENU_UNKNOWN_LINES" + PhaseText[PHASE.MENU_REQ_TX_INFO] = "MENU_REQ_TX_INFO" PhaseText[PHASE.MENU_LINES] = "MENU_LINES" PhaseText[PHASE.MENU_VALUES] = "MENU_VALUES" PhaseText[PHASE.VALUE_CHANGING] = "VALUE_CHANGING" @@ -1124,8 +1129,8 @@ local function DSM_Init_Text(rxId) -- Channel selection for SAFE MODE and GAINS on FC6250HX List_Text[0x000C] = "Inhibit?" --? - List_Text[0x000D] = "Gear" - for i = 1, 7 do List_Text[0x000D + i] = "Aux" .. i end -- Aux channels + List_Text[0x000D] = "Ch5 (Gear)" + for i = 1, 7 do List_Text[0x000D + i] = "Ch"..(i+5) .. " (Aux" .. i .. ")" end -- Aux channels -- Servo Output values.. local servoOutputValues = {0x0003,0x002D,0x002E,0x002F} --Inh (GAP), 5.5ms, 11ms, 22ms. Fixing L_m1 with 0..244 range! @@ -1144,16 +1149,16 @@ local function DSM_Init_Text(rxId) -- Valid Values: Inhibit? (GAP), Gear,Aux1..Aux7,X-Plus-1..XPlus-8 local channelValues = {0x0035,0x003A,0x003B,0x003C,0x003D,0x003E,0x003F,0x0040,0x0041,0x0042,0x0043,0x0044,0x0045,0x0046,0x0047,0x0048,0x0049} - List_Text[0x0035] = "Inhibit?" --? + List_Text[0x0035] = "Inhibit?" List_Text[0x0036] = "Throttle" List_Text[0x0037] = "Aileron" List_Text[0x0038] = "Elevator" List_Text[0x0039] = "Rudder" - List_Text[0x003A] = "Gear" - for i = 1, 7 do List_Text[0x003A + i] = "Aux" .. i end -- Aux channels on AR637T + List_Text[0x003A] = "Ch5 (Gear)" + for i = 1, 7 do List_Text[0x003A + i] = "Ch"..(i+5) .. " (Aux" .. i .. ")" end -- Aux channels on AR637T - for i = 1, 8 do -- 41..49 on AR637T -- This don't seem OK - List_Text[0x0041 + i] = "XPlus-" .. i + for i = 1, 8 do -- 41..49 + List_Text[0x0041 + i] = "Ch"..(i+13) .." (XPlus-" .. i .. ")" end -- ****No longer overrides of previous XPlus values, since using different array @@ -1215,7 +1220,8 @@ local function DSM_Init_Text(rxId) -- Gain channel selection Text[0x0089] = "Gain Channel" if (rxId ~= RX.FC6250HX) then List_Values[0x0089]=channelValues end --FC6250HX uses other range - -- Gain Sensitivity + + -- Gain Sensitivity selection Text[0x008A] = "Gain Sensitivity/r"; List_Values[0x008A]=gainValues -- Right Alight, (L_M1 was wide open range 0->244) Text[0x008B] = "Panic" @@ -1233,28 +1239,20 @@ local function DSM_Init_Text(rxId) Text[0x009A] = "Capture Failsafe Positions" Text[0x009C] = "Custom Failsafe" - Text[0x009F] = "Save Settings" + Text[0x009F] = "Save Settings " -- Save & Reboot RX Text[0x00A5] = "First Time Setup" Text[0x00AA] = "Capture Gyro Gains" Text[0x00AD] = "Gain Channel Select" - -- Safe mode options, Ihnibit + thi values + -- Safe mode options, Ihnibit + this values local safeModeOptions = {0x0003,0x00B0,0x00B1} -- inh (gap), "Self-Level/Angle Dem, Envelope List_Text[0x00B0] = "Self-Level/Angle Dem" List_Text[0x00B1] = "Envelope" + -- Flight Modes List Options List_Text[0x00B5] = "Inhibit" - List_Text[0x00B6] = "FM1" - List_Text[0x00B7] = "FM2" - List_Text[0x00B8] = "FM3" - List_Text[0x00B9] = "FM4" - List_Text[0x00BA] = "FM5" - List_Text[0x00BB] = "FM6" - List_Text[0x00BC] = "FM7" - List_Text[0x00BD] = "FM8" - List_Text[0x00BE] = "FM9" - List_Text[0x00BF] = "FM10" + for i = 1, 10 do List_Text[0x00B5 + i] = "Flight Mode " .. i end Text[0x00BE] = "Unknown_BE" -- Used in Reset menu (0x0001) while the RX is rebooting @@ -1263,8 +1261,8 @@ local function DSM_Init_Text(rxId) Text[0x00CA] = "SAFE/Panic Mode Setup" Text[0x00CD] = "Level model and capture attiude/M"; -- Different from List_Text , and force it to be a menu button - -- RX Orientations for AR631/AR637 - -- Optionally attach an Image to display + + -- RX Orientations for AR631/AR637, Optionally attach an Image + Alt Text to display List_Text[0x00CB] = "Position 1"; List_Text_Img[0x00CB] = "rx_pos_1.png|Pilot View: RX Label Up, Pins Back" List_Text[0x00CC] = "Position 2"; List_Text_Img[0x00CC] = "rx_pos_2.png|Pilot View: RX Label Left, Pins Back" List_Text[0x00CD] = "Position 3"; List_Text_Img[0x00CD] = "rx_pos_3.png|Pilot View: RX Label Down, Pins Back" @@ -1313,6 +1311,7 @@ local function DSM_Init_Text(rxId) Text[0x00E7] = "Left" Text[0x00E8] = "Right" + -- Gain Capture options List_Text[0x00F2] = "Fixed" List_Text[0x00F3] = "Adjustable" @@ -1355,7 +1354,7 @@ local function DSM_Init_Text(rxId) Text[0x01F4] = "Angle" Text[0x01F6] = "Failsafe Angles/c/b" -- SubTitle, Center+bold - --Inh, Self-Level/Angle Dem, Envelope -- (L_M1 was wide open) + --Inh, Self-Level/Angle Dem, Envelope -- (L_M was wide open range 0->244) Text[0x01F8] = "Safe Mode"; List_Values[0x01F8]=safeModeOptions Text[0x01F9] = "SAFE Select/c/b " -- SubTitle @@ -1374,11 +1373,13 @@ local function DSM_Init_Text(rxId) Text[0x0212] = "" -- empty Text[0x0213] = "" -- empty + -- AS3X orientation Setting menu (Level) Text[0x021A] = "Set the model level," Text[0x021B] = "and press Continue." Text[0x021C] = "" -- empty?? Text[0x021D] = "" -- empty?? + -- AS3X orientation Setting menu (Nose down) Text[0x021F] = "Set the model on its nose," Text[0x0220] = "and press Continue. If the" Text[0x0221] = "orientation on the next" @@ -1412,15 +1413,16 @@ local function DSM_Init_Text(rxId) Text[0x0239] = "the backup memory." Text[0x023A] = "" -- blank line + -- Utilities Copy flight modes Text[0x023D] = "Copy Flight Mode Settings" Text[0x023E] = "Source Flight Mode" Text[0x023F] = "Target Flight Mode" Text[0x0240] = "Utilities" + -- Gain Capture Page Text[0x024C] = "Gains will be captured on" Text[0x024D] = "Captured gains will be" Text[0x024E] = "Gains on" - Text[0x024F] = "were captured and changed" Text[0x0250] = "from Adjustable to Fixed" @@ -1458,24 +1460,25 @@ local function DSM_Init_Text(rxId) Text[0x8000] = "Flight Mode/c/b" --FC6250HX: 1=NORMAL 2= Stunt-1, 3=Stunt-2, 4=Hold Text[0x8001] = "Flight Mode/c/b" -- WAS "Flight Mode 1".. This usually is a Flight Mode w value relative to 0 (AR631/AR637) - Text[0x8002] = "Flight Mode 2/c/b" + Text[0x8002] = "Flight Mode 2/c/b" -- what RX does this show up?? Text[0x8003] = "Flight Mode 3/c/b" end --- Adjust the displayed value for Flight mode as needed +-- Adjust the displayed value for Flight mode line as needed local function GetFlightModeValue(line) - local value = line.Val + local value = line.Val or 0 -- protect when in the middle of changing FM can be nil local textId = line.TextId local header = line.Text - local out = value + local out = value .. "" if (textId == 0x8000) then -- FC6250HX if (DSM_Context.RX.Id == RX.FC6250HX) then -- Helicopter Flights modes - if (value==1) then out = header .. " 1 / Normal" - elseif (value==2) then out = header .. " 2 / Stunt 1" - elseif (value==3) then out = header .. " 3 / Stunt 2" - elseif (value==4) then out = header .. " 4 / Hold" + if (value==0) then out = header .. " 1 / Normal 1" + elseif (value==1) then out = header .. " 2 / Normal 2" + elseif (value==2) then out = header .. " 3 / Stunt 1" + elseif (value==3) then out = header .. " 4 / Stunt 2" + elseif (value==4) then out = header .. " 5 / Hold" else out = header .. " " .. value end @@ -1483,7 +1486,7 @@ local function GetFlightModeValue(line) -- No adjustment needed out = header .. " " .. value end - elseif (textId == 0x8001) then -- AR632/637 + elseif (textId == 0x8001) then -- AR630-637, AR8360T, AR10360T -- Seems that we really have to add +1 to the value, so Flight Mode 0 is Really Flight Mode 1 out = header .. " " .. (value + 1) else diff --git a/Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua b/Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua index 3c2bf71..22683e4 100644 --- a/Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua +++ b/Lua_scripts/DSMLIB/DsmFwPrgSIMLib.lua @@ -102,6 +102,8 @@ local function AR631_loadMenu(menuId) -- L[#1 T=M VId=0x1019 Text="SAFE Settings"[0x1E2] MId=0x1010 ] -- L[#2 T=M VId=0x1021 Text="F-Mode Setup"[0x87] MId=0x1010 ] -- L[#3 T=M VId=0x1022 Text="System Setup"[0x86] MId=0x1010 ] + -- Only on BNF locked receivers + -- L[#4 T=M VId=0x105C Text="SAFE Select "[0x1F9] MId=0x1010 ] ctx.Menu = { MenuId = 0x1010, TextId = 0x00F9, PrevId = 0, NextId = 0, BackId = 0x1000 } @@ -114,6 +116,7 @@ local function AR631_loadMenu(menuId) ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, TextId = 0x01E2, ValId = 0x1019 } ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, TextId = 0x0087, ValId = 0x1021 } ctx.MenuLines[3] = { Type = LINE_TYPE.MENU, TextId = 0x0086, ValId = 0x1022 } + ctx.MenuLines[4] = { Type = LINE_TYPE.MENU, TextId = 0x01F9, ValId = 0x105C } ctx.SelLine = 0 end lastGoodMenu = menuId @@ -647,23 +650,6 @@ local function AR631_loadMenu(menuId) ctx.SelLine = 2 lastGoodMenu = menuId - elseif (menuId==0x1051) then - --M[Id=0x1051 P=0x0 N=0x0 B=0x1010 Text="First Time Setup"] - --L[#0 T=M VId=0x1051 Text="Set the model level," MId=0x1051 ] - --L[#1 T=M VId=0x1051 Text="and press Continue." MId=0x1051 ] - --L[#2 T=M VId=0x1051 Text="" MId=0x1051 ] - --L[#5 T=M VId=0x1052 Text="Continue" MId=0x1051 ] - --L[#6 T=M VId=0x1053 Text="Set Orientation Manually" MId=0x1051 ] - - ctx.Menu = { MenuId = 0x1051, TextId = 0x00F9, PrevId = 0, NextId = 0, BackId = 0x1010 } - ctx.MenuLines[0] = { Type = LINE_TYPE.MENU, TextId = 0x021A, ValId = 0x1051 } - ctx.MenuLines[1] = { Type = LINE_TYPE.MENU, TextId = 0x021B, ValId = 0x1051 } - ctx.MenuLines[2] = { Type = LINE_TYPE.MENU, TextId = 0x021C, ValId = 0x1051 } - ctx.MenuLines[5] = { Type = LINE_TYPE.MENU, TextId = 0x0224, ValId = 0x1052 } - ctx.MenuLines[6] = { Type = LINE_TYPE.MENU, TextId = 0x0229, ValId = 0x1053 } - - ctx.SelLine = 5 - lastGoodMenu = menuId elseif (menuId==0x104F) then --M[Id=0x104F P=0x0 N=0x1050 B=0x1010 Text="First Time Setup"] --L[#0 T=M VId=0x104F Text="Make sure the model has been" MId=0x104F ]