gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:38:14 +00:00
Code Issues Projects Releases Wiki Activity

Remove paragraph resulting from the 125% bug in earlier OpenTX versions

Browse Source
This commit is contained in:
Arne Schwabe 2017-05-02 17:28:49 +02:00 committed by GitHub
parent bd46f6d25f
commit 2aa5b7917f
1 changed files with 0 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/Models.md
View File

@ -52,9 +52,6 @@ One of the most annoying functions on the Syma X5C is that the motors stop when
## Binding
For telemetry enabled modules, you should just let the remote autodetect the settings. Otherwise choose DSMX 22ms with 6ch or 7ch. To bind the model, keep the transmitter off, power on the Inductrix. Wait until it flashes fast and then power up the Tx and use Bind.
## Tx Setup
Remember that 100% on your transmitter using the MULTI-Module corresponds to 125% on the DSM receiver side. On some functions sending 100% will confuse the model. Conversely 80% on your Tx is interpreted to be 100% at the model. Consider this when implementing the suggestions below.
### Throttle
For Inductrix FPV you might need to adjust the lower end of throttle to be a higher than default, otherwise motors will be spinning on minimal throttle. One way to do this is to set the throttle to 80% output (100% of DSM output) and then to enable the **Throttle Idle Trim Only** under the Model Setup menu. See image below: