From 28b3438308cf02728efa0c6fd3152c9f251e1034 Mon Sep 17 00:00:00 2001 From: Goebish Date: Thu, 16 May 2019 12:52:34 +0200 Subject: [PATCH] Update documentation --- Protocols_Details.md | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Protocols_Details.md b/Protocols_Details.md index 47fbfa7..f70f37a 100644 --- a/Protocols_Details.md +++ b/Protocols_Details.md @@ -866,6 +866,9 @@ Only 3 TX IDs available, change RX_Num value 0..2 to cycle through them If the model does not respond well to inputs or hard to bind, you can try to set Power to Low. But this protocol is known to be problematic because it's using the xn297L emulation with a transmission speed of 250kbps therefore it doesn't work very well with every modules, this is an hardware issue with the accuracy of the components used and nothing we can do about it in the firmware. +If a CC2500 module is available it will be used in place of the NRF24L01, fixing the issue mentioned below. When using a CC2500 module, Option for this protocol corresponds to fine frequency tuning. +Check the [Frequency Tuning page](/docs/Frequency_Tuning.md) to determine it if necessary. + ### Sub_protocol H26WH - *5* CH6| ---|