gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-28 23:43:16 +00:00
Code Issues Projects Releases Wiki Activity

Merge branch 'master' of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module

Browse Source
This commit is contained in:
Pascal Langer
2017-12-07 16:02:21 +01:00
parent 4418cab3a5 b3cddfe2d4
commit 27783677c2
21 changed files with 205 additions and 36 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
Multiprotocol/_Config.h
View File

@@ -23,7 +23,7 @@
//If you know parameters you want for sure to be enabled or disabled which survives in future, you can use a file named "_MyConfig.h".
//An example is given within the file named "_MyConfig.h.example" which needs to be renamed if you want to use it.
//To enable this config file remove the // from the line below. It's automatically loaded if the file exists for the AVR platform but not STM32...
//#define USE_MY_CONFIG
#define USE_MY_CONFIG
/*******************/
/*** TX SETTINGS ***/
@@ -63,7 +63,7 @@
//Allow flashing multimodule directly with TX(erky9x or opentx modified firmwares)
//Instructions: https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/tree/master/BootLoaders#compiling--uploading-firmware-with-the-flash-from-tx-bootloader
//To enable this feature remove the "//" on the next line. Requires a compatible bootloader or upload method to be selected when you use the Multi 4-in-1 Boards Manager definitions.
//#define CHECK_FOR_BOOTLOADER
#define CHECK_FOR_BOOTLOADER
/****************/
/*** RF CHIPS ***/
@@ -201,14 +201,14 @@
//#define MULTI_TELEMETRY
//Comment a line to disable a specific protocol telemetry
#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
//#define DSM_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
#define SPORT_TELEMETRY // Use FrSkyX SPORT format to send telemetry to TX
#define AFHDS2A_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
//#define AFHDS2A_FW_TELEMETRY // Forward received telemetry packet directly to TX to be decoded
#define HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define AFHDS2A_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define BAYANG_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HUBSAN_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define CABELL_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//#define AFHDS2A_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//#define BAYANG_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//#define HUBSAN_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//#define CABELL_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
//SPORT_POLLING is an implementation of the same polling routine as XJT module for sport telemetry bidirectional communication.
//This is useful for passing sport control frames from Tx to rx(ex: changing Betaflight PID or VTX channels on the fly using LUA scripts with OpentX).
@@ -231,7 +231,7 @@
/*************************/
//In this section you can configure all details about PPM.
//If you do not plan to use the PPM mode comment this line using "//" to save Flash space, you don't need to configure anything below in this case
#define ENABLE_PPM
//#define ENABLE_PPM
/*** TX END POINTS ***/
//It is important for the module to know the endpoints of your radio.