gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-13 19:13:14 +00:00
Code Issues Projects Releases Wiki Activity

E016Hv2 and ESKY150V2 don't need the NRF code anymore

Browse Source
This commit is contained in:
Pascal Langer
2021-01-21 11:46:54 +01:00
parent 6d4b4bd2c0
commit 23141b6087
9 changed files with 245 additions and 212 deletions
Download Patch File Download Diff File Expand all files Collapse all files

170
Multiprotocol/CC2500_SPI.ino
View File

@@ -163,4 +163,174 @@ void CC2500_SetPower()
prev_power=power;
}
}
void __attribute__((unused)) CC2500_SetFreqOffset()
{
if(prev_option != option)
{
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
}
}
void __attribute__((unused)) CC2500_250K_Init()
{
CC2500_Strobe(CC2500_SIDLE);
// Address Config = No address check
// Base Frequency = 2400
// CRC Autoflush = false
// CRC Enable = false
// Channel Spacing = 333.251953
// Data Format = Normal mode
// Data Rate = 249.939
// Deviation = 126.953125
// Device Address = 0
// Manchester Enable = false
// Modulated = true
// Modulation Format = GFSK
// Packet Length Mode = Variable packet length mode. Packet length configured by the first byte after sync word
// RX Filter BW = 203.125000
// Sync Word Qualifier Mode = No preamble/sync
// TX Power = 0
// Whitening = false
// Fast Frequency Hopping - no PLL auto calibration
CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x01); // Packet Automation Control
CC2500_WriteReg(CC2500_0B_FSCTRL1, 0x0A); // Frequency Synthesizer Control
CC2500_WriteReg(CC2500_0C_FSCTRL0, option); // Frequency offset hack
CC2500_WriteReg(CC2500_0D_FREQ2, 0x5C); // Frequency Control Word, High Byte
CC2500_WriteReg(CC2500_0E_FREQ1, 0x4E); // Frequency Control Word, Middle Byte
CC2500_WriteReg(CC2500_0F_FREQ0, 0xC3); // Frequency Control Word, Low Byte
CC2500_WriteReg(CC2500_10_MDMCFG4, 0x8D); // Modem Configuration
CC2500_WriteReg(CC2500_11_MDMCFG3, 0x3B); // Modem Configuration
CC2500_WriteReg(CC2500_12_MDMCFG2, 0x10); // Modem Configuration
CC2500_WriteReg(CC2500_13_MDMCFG1, 0x23); // Modem Configuration
CC2500_WriteReg(CC2500_14_MDMCFG0, 0xA4); // Modem Configuration
CC2500_WriteReg(CC2500_15_DEVIATN, 0x62); // Modem Deviation Setting
CC2500_WriteReg(CC2500_18_MCSM0, 0x08); // Main Radio Control State Machine Configuration
CC2500_WriteReg(CC2500_19_FOCCFG, 0x1D); // Frequency Offset Compensation Configuration
CC2500_WriteReg(CC2500_1A_BSCFG, 0x1C); // Bit Synchronization Configuration
CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0xC7); // AGC Control
CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0x00); // AGC Control
CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xB0); // AGC Control
CC2500_WriteReg(CC2500_21_FREND1, 0xB6); // Front End RX Configuration
CC2500_WriteReg(CC2500_23_FSCAL3, 0xEA); // Frequency Synthesizer Calibration
CC2500_WriteReg(CC2500_25_FSCAL1, 0x00); // Frequency Synthesizer Calibration
CC2500_WriteReg(CC2500_26_FSCAL0, 0x11); // Frequency Synthesizer Calibration
CC2500_SetTxRxMode(TX_EN);
CC2500_SetPower();
}
void __attribute__((unused)) CC2500_250K_HoppingCalib(uint8_t num_freq)
{
for (uint8_t i = 0; i < num_freq; i++)
{
CC2500_Strobe(CC2500_SIDLE);
// spacing is 333.25 kHz, must multiply channel by 3
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[i]*3);
// calibrate
CC2500_Strobe(CC2500_SCAL);
delayMicroseconds(900);
calData[i]=CC2500_ReadReg(CC2500_25_FSCAL1);
}
}
void __attribute__((unused)) CC2500_250K_Hopping(uint8_t index)
{
// spacing is 333.25 kHz, must multiply channel by 3
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[index] * 3);
// set PLL calibration
CC2500_WriteReg(CC2500_25_FSCAL1, calData[index]);
}
void __attribute__((unused)) CC2500_250K_RFChannel(uint8_t number)
{
CC2500_Strobe(CC2500_SIDLE);
// spacing is 333.25 kHz, must multiply channel by 3
CC2500_WriteReg(CC2500_0A_CHANNR, number*3);
// calibrate
CC2500_Strobe(CC2500_SCAL);
delayMicroseconds(900);
}
//NRF emulation layer with CRC16 enabled
uint8_t cc2500_nrf_tx_addr[5], cc2500_nrf_addr_len;
void __attribute__((unused)) CC2500_250K_NRF_SetTXAddr(uint8_t* addr, uint8_t len)
{
cc2500_nrf_addr_len = len;
memcpy(cc2500_nrf_tx_addr, addr, len);
}
void __attribute__((unused)) CC2500_250K_NRF_WritePayload(uint8_t* msg, uint8_t len)
{
#if defined(ESKY150V2_CC2500_INO)
uint8_t buf[158];
#else
uint8_t buf[35];
#endif
uint8_t last = 0;
uint8_t i;
//nrf preamble
if(cc2500_nrf_tx_addr[cc2500_nrf_addr_len - 1] & 0x80)
buf[0]=0xAA;
else
buf[0]=0x55;
last++;
// address
for (i = 0; i < cc2500_nrf_addr_len; ++i)
buf[last++] = cc2500_nrf_tx_addr[cc2500_nrf_addr_len - i - 1];
// payload
for (i = 0; i < len; ++i)
buf[last++] = msg[i];
// crc
crc = 0xffff;
for (uint8_t i = 1; i < last; ++i)
crc16_update( buf[i], 8);
buf[last++] = crc >> 8;
buf[last++] = crc & 0xff;
buf[last++] = 0;
//for(uint8_t i=0;i<last;i++)
// debug("%02X ",buf[i]);
//debugln("");
// stop TX/RX
CC2500_Strobe(CC2500_SIDLE);
// flush tx FIFO
CC2500_Strobe(CC2500_SFTX);
// packet length
CC2500_WriteReg(CC2500_3F_TXFIFO, last);
// transmit nrf packet
uint8_t *buff=buf;
uint8_t status;
if(last>63)
{
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 63);
CC2500_Strobe(CC2500_STX);
last-=63;
buff+=63;
while(last)
{//Loop until all the data is sent
do
{// Wait for the FIFO to become available
status=CC2500_ReadReg(CC2500_3A_TXBYTES | CC2500_READ_BURST);
}
while((status&0x7F)>31 && (status&0x80)==0);
if(last>31)
{//Send 31 bytes
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 31);
last-=31;
buff+=31;
}
else
{//Send last bytes
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
last=0;
}
}
}
else
{//Send packet
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
CC2500_Strobe(CC2500_STX);
}
}
#endif

17
Multiprotocol/E016HV2_cc2500.ino
View File

@@ -15,7 +15,7 @@ Multiprotocol is distributed in the hope that it will be useful,
#if defined(E016HV2_CC2500_INO)
#include "iface_nrf250k.h"
#include "iface_cc2500.h"
//#define FORCE_E016HV2_ORIGINAL_ID
@@ -27,9 +27,6 @@ Multiprotocol is distributed in the hope that it will be useful,
static void __attribute__((unused)) E016HV2_send_packet()
{
if(option==0)
option=1; // Select the CC2500
//payload length (after this byte)
packet[0 ] = 0x0A;
@@ -42,7 +39,7 @@ static void __attribute__((unused)) E016HV2_send_packet()
else
{
BIND_DONE;
XN297L_RFChannel(rf_ch_num); // Set main channel
CC2500_250K_RFChannel(rf_ch_num); // Set main channel
}
}
else
@@ -81,8 +78,8 @@ static void __attribute__((unused)) E016HV2_send_packet()
packet[10] = GET_FLAG(CH5_SW, 0x01) // 0x01=TakeOff/Land (momentary switch)
| GET_FLAG(CH6_SW, 0x04); // 0x04=Emergeny Stop (momentary switch)
XN297L_SetPower(); // Set tx_power
XN297L_SetFreqOffset(); // Set frequency offset
CC2500_SetPower(); // Set tx_power
CC2500_SetFreqOffset(); // Set frequency offset
//Build real packet and send it
static uint8_t pid=0;
@@ -130,10 +127,8 @@ uint16_t E016HV2_callback()
uint16_t initE016HV2()
{
//Config CC2500
if(option==0)
option=1; // Select the CC2500
XN297L_Init();
XN297L_RFChannel(E016HV2_RF_BIND_CHANNEL); // Set bind channel
CC2500_250K_Init();
CC2500_250K_RFChannel(E016HV2_RF_BIND_CHANNEL); // Set bind channel
#ifdef FORCE_E016HV2_ORIGINAL_ID
rx_tx_addr[2]=0x27;

28
Multiprotocol/ESky150v2_cc2500.ino
View File

@@ -15,7 +15,7 @@
#if defined(ESKY150V2_CC2500_INO)
#include "iface_nrf250k.h"
#include "iface_cc2500.h"
//#define ESKY150V2_FORCE_ID
@@ -52,17 +52,17 @@ static void __attribute__((unused)) ESKY150V2_set_freq(void)
hopping_frequency[ESKY150V2_NFREQCHANNELS]=ESKY150V2_BIND_CHANNEL;
//Calib all channels
NRF250K_SetFreqOffset(); // Set frequency offset
NRF250K_HoppingCalib(ESKY150V2_NFREQCHANNELS+1);
CC2500_SetFreqOffset(); // Set frequency offset
CC2500_250K_HoppingCalib(ESKY150V2_NFREQCHANNELS+1);
}
static void __attribute__((unused)) ESKY150V2_send_packet()
{
NRF250K_SetFreqOffset(); // Set frequency offset
NRF250K_Hopping(hopping_frequency_no);
CC2500_SetFreqOffset(); // Set frequency offset
CC2500_250K_Hopping(hopping_frequency_no);
if (++hopping_frequency_no >= ESKY150V2_NFREQCHANNELS)
hopping_frequency_no = 0;
NRF250K_SetPower(); //Set power level
CC2500_SetPower(); //Set power level
packet[0] = 0xFA; // Unknown
packet[1] = 0x41; // Unknown
@@ -74,7 +74,7 @@ static void __attribute__((unused)) ESKY150V2_send_packet()
packet[4+2*i] = channel;
packet[5+2*i] = channel>>8;
}
NRF250K_WritePayload(packet, ESKY150V2_PAYLOADSIZE);
CC2500_250K_NRF_WritePayload(packet, ESKY150V2_PAYLOADSIZE);
}
uint16_t ESKY150V2_callback()
@@ -90,14 +90,14 @@ uint16_t ESKY150V2_callback()
else
{
BIND_DONE; //Need full power for bind to work...
NRF250K_SetPower(); //Set power level
CC2500_SetPower(); //Set power level
BIND_IN_PROGRESS;
NRF250K_WritePayload(packet, ESKY150V2_BINDPAYLOADSIZE);
CC2500_250K_NRF_WritePayload(packet, ESKY150V2_BINDPAYLOADSIZE);
if (--bind_counter == 0)
{
BIND_DONE;
// Change TX address from bind to normal mode
NRF250K_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
CC2500_250K_NRF_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
memset(packet,0x00,ESKY150V2_PAYLOADSIZE);
}
return 30000; //ESKY150V2_BINDING_PACKET_PERIOD;
@@ -108,7 +108,7 @@ uint16_t ESKY150V2_callback()
uint16_t initESKY150V2()
{
if(option==0) option=1; // Trick the RF component auto select system
NRF250K_Init();
CC2500_250K_Init();
ESKY150V2_set_freq();
hopping_frequency_no = 0;
@@ -120,8 +120,8 @@ uint16_t initESKY150V2()
if(IS_BIND_IN_PROGRESS)
{
NRF250K_SetTXAddr((uint8_t *)"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE); //Bind address
NRF250K_Hopping(ESKY150V2_NFREQCHANNELS); //Bind channel
CC2500_250K_NRF_SetTXAddr((uint8_t *)"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE); //Bind address
CC2500_250K_Hopping(ESKY150V2_NFREQCHANNELS); //Bind channel
memcpy(packet,"\x73\x73\x74\x63", ESKY150V2_TXID_SIZE);
memcpy(&packet[ESKY150V2_TXID_SIZE],rx_tx_addr, ESKY150V2_TXID_SIZE);
packet[8]=0x41; //Unknown
@@ -134,7 +134,7 @@ uint16_t initESKY150V2()
bind_counter=100;
}
else
NRF250K_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
CC2500_250K_NRF_SetTXAddr(rx_tx_addr, ESKY150V2_TXID_SIZE);
return 50000;
}

2
Multiprotocol/Multiprotocol.h
View File

@@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 2
#define VERSION_PATCH_LEVEL 8
#define VERSION_PATCH_LEVEL 9
//******************
// Protocols

1
Multiprotocol/Multiprotocol.ino
View File

@@ -1094,6 +1094,7 @@ static void protocol_init()
modules_reset(); // Reset all modules
crc16_polynomial = 0x1021; // Default CRC crc16_polynomial
crc8_polynomial = 0x31; // Default CRC crc8_polynomial
prev_option = option;
// reset telemetry
#ifdef TELEMETRY

150
Multiprotocol/NRF250K_EMU.ino
View File

@@ -39,56 +39,10 @@ static void __attribute__((unused)) XN297L_Init()
//CC2500
#ifdef CC2500_INSTALLED
debugln("Using CC2500");
xn297_scramble_enabled=XN297_SCRAMBLED; //enabled by default
PE1_off; // antenna RF2
PE2_on;
CC2500_Reset();
CC2500_Strobe(CC2500_SIDLE);
// Address Config = No address check
// Base Frequency = 2400
// CRC Autoflush = false
// CRC Enable = false
// Channel Spacing = 333.251953
// Data Format = Normal mode
// Data Rate = 249.939
// Deviation = 126.953125
// Device Address = 0
// Manchester Enable = false
// Modulated = true
// Modulation Format = GFSK
// Packet Length Mode = Variable packet length mode. Packet length configured by the first byte after sync word
// RX Filter BW = 203.125000
// Sync Word Qualifier Mode = No preamble/sync
// TX Power = 0
// Whitening = false
// Fast Frequency Hopping - no PLL auto calibration
CC2500_WriteReg(CC2500_08_PKTCTRL0, 0x01); // Packet Automation Control
CC2500_WriteReg(CC2500_0B_FSCTRL1, 0x0A); // Frequency Synthesizer Control
CC2500_WriteReg(CC2500_0C_FSCTRL0, option); // Frequency offset hack
CC2500_WriteReg(CC2500_0D_FREQ2, 0x5C); // Frequency Control Word, High Byte
CC2500_WriteReg(CC2500_0E_FREQ1, 0x4E); // Frequency Control Word, Middle Byte
CC2500_WriteReg(CC2500_0F_FREQ0, 0xC3); // Frequency Control Word, Low Byte
CC2500_WriteReg(CC2500_10_MDMCFG4, 0x8D); // Modem Configuration
CC2500_WriteReg(CC2500_11_MDMCFG3, 0x3B); // Modem Configuration
CC2500_WriteReg(CC2500_12_MDMCFG2, 0x10); // Modem Configuration
CC2500_WriteReg(CC2500_13_MDMCFG1, 0x23); // Modem Configuration
CC2500_WriteReg(CC2500_14_MDMCFG0, 0xA4); // Modem Configuration
CC2500_WriteReg(CC2500_15_DEVIATN, 0x62); // Modem Deviation Setting
CC2500_WriteReg(CC2500_18_MCSM0, 0x08); // Main Radio Control State Machine Configuration
CC2500_WriteReg(CC2500_19_FOCCFG, 0x1D); // Frequency Offset Compensation Configuration
CC2500_WriteReg(CC2500_1A_BSCFG, 0x1C); // Bit Synchronization Configuration
CC2500_WriteReg(CC2500_1B_AGCCTRL2, 0xC7); // AGC Control
CC2500_WriteReg(CC2500_1C_AGCCTRL1, 0x00); // AGC Control
CC2500_WriteReg(CC2500_1D_AGCCTRL0, 0xB0); // AGC Control
CC2500_WriteReg(CC2500_21_FREND1, 0xB6); // Front End RX Configuration
CC2500_WriteReg(CC2500_23_FSCAL3, 0xEA); // Frequency Synthesizer Calibration
CC2500_WriteReg(CC2500_25_FSCAL1, 0x00); // Frequency Synthesizer Calibration
CC2500_WriteReg(CC2500_26_FSCAL0, 0x11); // Frequency Synthesizer Calibration
CC2500_SetTxRxMode(TX_EN);
CC2500_SetPower();
xn297_scramble_enabled=XN297_SCRAMBLED; //enabled by default
CC2500_250K_Init();
#endif
}
@@ -267,14 +221,7 @@ static void __attribute__((unused)) XN297L_HoppingCalib(uint8_t num_freq)
#endif
return; //NRF
#ifdef CC2500_INSTALLED
for (uint8_t i = 0; i < num_freq; i++)
{
CC2500_Strobe(CC2500_SIDLE);
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[i]*3);
CC2500_Strobe(CC2500_SCAL);
delayMicroseconds(900);
calData[i]=CC2500_ReadReg(CC2500_25_FSCAL1);
}
CC2500_250K_HoppingCalib(num_freq);
#endif
}
@@ -288,10 +235,7 @@ static void __attribute__((unused)) XN297L_Hopping(uint8_t index)
return;
}
#ifdef CC2500_INSTALLED
// spacing is 333.25 kHz, must multiply xn297 channel by 3
CC2500_WriteReg(CC2500_0A_CHANNR, hopping_frequency[index] * 3);
// set PLL calibration
CC2500_WriteReg(CC2500_25_FSCAL1, calData[index]);
CC2500_250K_Hopping(index);
#endif
}
@@ -305,10 +249,7 @@ static void __attribute__((unused)) XN297L_RFChannel(uint8_t number)
return;
}
#ifdef CC2500_INSTALLED
CC2500_Strobe(CC2500_SIDLE);
CC2500_WriteReg(CC2500_0A_CHANNR, number*3);
CC2500_Strobe(CC2500_SCAL);
delayMicroseconds(900);
CC2500_250K_RFChannel(number);
#endif
}
@@ -336,9 +277,8 @@ static void __attribute__((unused)) XN297L_SetFreqOffset()
if (prev_option != option)
{
if(prev_option==0 || option==0)
CHANGE_PROTOCOL_FLAG_on;
prev_option = option;
CC2500_WriteReg(CC2500_0C_FSCTRL0, option);
CHANGE_PROTOCOL_FLAG_on; // switch from NRF <-> CC2500
CC2500_SetFreqOffset();
}
#endif
}
@@ -357,8 +297,7 @@ static void __attribute__((unused)) NRF250K_SetTXAddr(uint8_t* addr, uint8_t len
}
//CC2500
#ifdef CC2500_INSTALLED
xn297_addr_len = len;
memcpy(xn297_tx_addr, addr, len);
CC2500_250K_NRF_SetTXAddr(addr, len);
#endif
}
@@ -375,78 +314,7 @@ static void __attribute__((unused)) NRF250K_WritePayload(uint8_t* msg, uint8_t l
}
//CC2500
#ifdef CC2500_INSTALLED
#if defined(ESKY150V2_CC2500_INO)
uint8_t buf[158];
#else
uint8_t buf[35];
#endif
uint8_t last = 0;
uint8_t i;
//nrf preamble
if(xn297_tx_addr[xn297_addr_len - 1] & 0x80)
buf[0]=0xAA;
else
buf[0]=0x55;
last++;
// address
for (i = 0; i < xn297_addr_len; ++i)
buf[last++] = xn297_tx_addr[xn297_addr_len - i - 1];
// payload
for (i = 0; i < len; ++i)
buf[last++] = msg[i];
// crc
crc = 0xffff;
for (uint8_t i = 1; i < last; ++i)
crc16_update( buf[i], 8);
buf[last++] = crc >> 8;
buf[last++] = crc & 0xff;
buf[last++] = 0;
//for(uint8_t i=0;i<last;i++)
// debug("%02X ",buf[i]);
//debugln("");
// stop TX/RX
CC2500_Strobe(CC2500_SIDLE);
// flush tx FIFO
CC2500_Strobe(CC2500_SFTX);
// packet length
CC2500_WriteReg(CC2500_3F_TXFIFO, last);
// transmit nrf packet
uint8_t *buff=buf;
uint8_t status;
if(last>63)
{
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 63);
CC2500_Strobe(CC2500_STX);
last-=63;
buff+=63;
while(last)
{//Loop until all the data is sent
do
{// Wait for the FIFO to become available
status=CC2500_ReadReg(CC2500_3A_TXBYTES | CC2500_READ_BURST);
}
while((status&0x7F)>31 && (status&0x80)==0);
if(last>31)
{//Send 31 bytes
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, 31);
last-=31;
buff+=31;
}
else
{//Send last bytes
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
last=0;
}
}
}
else
{//Send packet
CC2500_WriteRegisterMulti(CC2500_3F_TXFIFO, buff, last);
CC2500_Strobe(CC2500_STX);
}
CC2500_250K_NRF_WritePayload(msg, len);
#endif
}

6
Multiprotocol/Validate.h
View File

@@ -251,6 +251,7 @@
#endif
#ifndef CC2500_INSTALLED
#undef CORONA_CC2500_INO
#undef E016HV2_CC2500_INO
#undef ESKY150V2_CC2500_INO
#undef FRSKYD_CC2500_INO
#undef FRSKYL_CC2500_INO
@@ -259,13 +260,12 @@
#undef FRSKY_RX_CC2500_INO
#undef HITEC_CC2500_INO
#undef HOTT_CC2500_INO
#undef OMP_CC2500_INO
#undef OMP_CC2500_INO // Use both CC2500 and NRF code
#undef REDPINE_CC2500_INO
#undef RLINK_CC2500_INO
#undef SCANNER_CC2500_INO
#undef FUTABA_CC2500_INO
#undef SKYARTEC_CC2500_INO
#undef E016HV2_CC2500_INO
#endif
#ifndef NRF24L01_INSTALLED
#undef ASSAN_NRF24L01_INO
@@ -277,11 +277,9 @@
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
#undef DM002_NRF24L01_INO
#undef E016HV2_CC2500_INO // Use both CC2500 and NRF code
#undef E01X_NRF24L01_INO
#undef ESKY_NRF24L01_INO
#undef ESKY150_NRF24L01_INO
#undef ESKY150V2_CC2500_INO // Use both CC2500 and NRF code
#undef FQ777_NRF24L01_INO
#undef FX816_NRF24L01_INO
#undef FY326_NRF24L01_INO

4
Multiprotocol/_Config.h
View File

@@ -191,7 +191,7 @@
//The protocols below need a CC2500 to be installed
#define CORONA_CC2500_INO
#define E016HV2_CC2500_INO
#define ESKY150V2_CC2500_INO //Need both CC2500 and NRF
#define ESKY150V2_CC2500_INO
#define FRSKYL_CC2500_INO
#define FRSKYD_CC2500_INO
#define FRSKYV_CC2500_INO
@@ -199,7 +199,6 @@
#define FRSKY_RX_CC2500_INO
#define HITEC_CC2500_INO
#define HOTT_CC2500_INO
#define OMP_CC2500_INO //Need both CC2500 and NRF
#define SCANNER_CC2500_INO
#define FUTABA_CC2500_INO
#define SKYARTEC_CC2500_INO
@@ -234,6 +233,7 @@
#define MJXQ_NRF24L01_INO
#define MT99XX_NRF24L01_INO
#define NCC1701_NRF24L01_INO
#define OMP_CC2500_INO //Need both CC2500 and NRF
#define POTENSIC_NRF24L01_INO
#define PROPEL_NRF24L01_INO
#define Q303_NRF24L01_INO