gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:38:14 +00:00
Code Issues Projects Releases Wiki Activity

Update Tx-Taranis.md

Browse Source
This commit is contained in:
Arne Schwabe 2016-11-01 14:45:20 +01:00 committed by GitHub
parent e2bea81c64
commit 22d2209a1b
1 changed files with 11 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
docs/Tx-Taranis.md
View File

@ -1,5 +1,5 @@
# FrSky Taranis Setup # FrSky Taranis/Horus Setup
This page contains setup instructions for the FrSky Taranis family of transmitters. These include the Trananis X9D, Taranis X9D Plus and Taranis X9E. It may also be relevant to the following transmitters: Turnigy 9XR Pro, Sky board-based, AR9X board-based, 9Xtreme board-based and AR9X Uni board-based. This page contains setup instructions for the FrSky family of transmitters. These include the Trananis X9D, Taranis X9D Plus, Taranis X9E and Horus X12S. It may also be relevant to the following transmitters: Turnigy 9XR Pro, Sky board-based, AR9X board-based, 9Xtreme board-based and AR9X Uni board-based.
<img src="http://www.frsky-rc.com/product/images/pic/1456723548.jpg" width="300" height="200" /> <img src="http://www.frsky-rc.com/product/images/pic/1456723548.jpg" width="300" height="200" />
<img src="http://www.frsky-rc.com/product/images/pic/1456723588.jpg" width="300" height="200" /> <img src="http://www.frsky-rc.com/product/images/pic/1456723588.jpg" width="300" height="200" />
@ -7,9 +7,10 @@ This page contains setup instructions for the FrSky Taranis family of transmitte
The instructions below are relevant to the following firmwares: The instructions below are relevant to the following firmwares:
1. Taranis with erSky9X available [here](http://www.er9x.com) 1. Taranis with erSky9X available [here](http://www.er9x.com)
1. Taranis with OpenTx available [here](http://plaisthos.de/opentx/) 1. Taranis with OpenTx available [here](http://plaisthos.de/opentx/)
1. Taranis/Horus with OpenTX 2.2 and multimodule option enabled [here](http://www.open-tx.org/)
The MULTI-module can be used with all transmitters and firmwares in PPM mode. Taranis transmitters running erSky9X or OpenTX (Version 2.1.8 Multi or Version 2.2) fully support Serial mode. The MULTI-module can be used with all transmitters and firmwares in PPM mode. Taranis transmitters running erSky9X or OpenTX (Version 2.1.9 Multi or Version 2.2) fully support Serial mode.
## PPM Mode ## PPM Mode
Please refer to the [PPM Setup](PPM_Setup.md) page. Please refer to the [PPM Setup](PPM_Setup.md) page.
@ -29,16 +30,20 @@ Tutorials for uploading new firmware using the SD Card are available [here](http
First, confirm that the MULTI-Module has the required physical connections between the pins on the back of the Tx and the ATMega328 microprocessor. This may require some soldering and depends on which version of the DIY Multiprotocol module you have. Check out the specific pages for your module hardware (under the section "Enabling Serial") linked [here](Hardware.md) for details. First, confirm that the MULTI-Module has the required physical connections between the pins on the back of the Tx and the ATMega328 microprocessor. This may require some soldering and depends on which version of the DIY Multiprotocol module you have. Check out the specific pages for your module hardware (under the section "Enabling Serial") linked [here](Hardware.md) for details.
1. Plug in your MULTI-Module into the Taranis module bay. 1. Plug in your MULTI-Module into the transmitter's module bay.
2. If you have a rotary protocol selection switch, turn the switch to position 0 to put the unit into Serial mode. 2. If you have a rotary protocol selection switch, turn the switch to position 0 to put the unit into Serial mode.
2. Ensure throttle is down and all switches are in the start position and power up the Taranis. The red LED on the MULTI-Module should be flashing with a period of about 1s indicating that it has not established a valid serial link with the Tx. This is expected as we have not set up the Tx yet. 2. Ensure throttle is down and all switches are in the start position and power up the Transmitter. The red LED on the MULTI-Module should be flashing with a period of about 1s indicating that it has not established a valid serial link with the Tx. This is expected as we have not set up the Tx yet.
3. Create a new model (make sure channel order is AETR) and on the first Model Settings page scroll down to disable the internal RF and enable the external RF by selecting MULTI as the external RF. Your Taranis settings should look like this: {insert picture of Taranis screen showing external RF settings} The Red LED on the MULTI-Module should briefly flash and then go off. This confirms that the MULTI-Module module has established serial communication with the Tx. 3. Create a new model (make sure channel order is AETR) and on the first Model Settings page scroll down to disable the internal RF and enable the external RF by selecting MULTI as the external RF. Your Transmitter settings should look like this:
<img src="images/settings-horus.png" /> <img src="images/settings-taranis.png" />
The Red LED on the MULTI-Module should briefly flash and then stay on. This confirms that the MULTI-Module module has established serial communication with the Tx.
4. If the red LED on the module continues to flash at a period of about 1s then it signals that serial communication has not been established. Check your settings under the model menu as described above and check that the protocol selection switch on the module is at 0 (zero). If there is still no communication, power down and power up the Tx. Finally check that you have correctly enabled your module for serial as described in specific pages for your module hardware (under the section "Enabling Serial") linked [here](Hardware.md) 4. If the red LED on the module continues to flash at a period of about 1s then it signals that serial communication has not been established. Check your settings under the model menu as described above and check that the protocol selection switch on the module is at 0 (zero). If there is still no communication, power down and power up the Tx. Finally check that you have correctly enabled your module for serial as described in specific pages for your module hardware (under the section "Enabling Serial") linked [here](Hardware.md)
###Protocol Selection in Serial mode ###Protocol Selection in Serial mode
To select the protocol, scroll through the available options under the Model Settings menu. Depending on which protocol you have selected you may be required to select a sup-protocol and options. For example, the FrSky protocol has three sub-protocols FrSkyV, FrSkyD and FrSkyX. Each of the sub-protocols may have options that specify the number of channels and the packet frame rate, etc. To select the protocol, scroll through the available options under the Model Settings menu. Depending on which protocol you have selected you may be required to select a sup-protocol and options. For example, the FrSky protocol has three sub-protocols FrSkyV, FrSkyD and FrSkyX. Each of the sub-protocols may have options that specify the number of channels and the packet frame rate, etc.
The following picture shows DSM – DSMX – Option 6 (6 channels and 11ms frame rate). Check out the [Protocol Details](Protocol_Details.md) page for detailed information and suggestions regarding the sub-protocols and options. The following picture shows DSM – DSMX – Option 6 (6 channels and 11ms frame rate). Check out the [Protocol Details](Protocol_Details.md) page for detailed information and suggestions regarding the sub-protocols and options.
###Binding in Serial mode ###Binding in Serial mode
1. Switch on the model or put the receiver into bind mode 1. Switch on the model or put the receiver into bind mode
1. On the transmitter go to the Model Settings menu and scroll down to the [Bind] menu option and press Enter. 1. On the transmitter go to the Model Settings menu and scroll down to the [Bind] menu option and press Enter.