gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 22:58:10 +00:00
Code Issues Projects Releases Wiki Activity

updated Compiling_STM32 doc

Browse Source
This commit is contained in:
midelic 2017-08-03 22:04:29 +03:00
parent 507e1d2b50
commit 200a1dc3da
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Compiling_STM32.md
View File

@ -89,10 +89,14 @@ Notes:
#### Option 3: Flashing with TX(firmware) #### Option 3: Flashing with TX(firmware)
1. Flash new STM32 bootloader(StmBoot) on multimodule.You have 2 options here. 1. Flash new STM32 bootloader(StmBoot) on multimodule.You have 2 options here.
- Flash precompiled binary **StmBoot.ino.generic_stm32f103c** using ST Flash loader demonstrator and USB serial, with same custom cable presented above.This process is the same as flashing with precompiled binaries. - Flash precompiled binary **StmBoot.ino.generic_stm32f103c** using ST Flash loader demonstrator and USB serial, with same custom cable presented above.This process is the same as flashing with precompiled binaries.
- Compile Stmboot files ,**Stmboot.ino** file using arduino IDE ,select Tools ,Upload method ,**"Serial" **and press upload button.All this setup is using the same custom cable and USB-serial device(FTDI) as before. - Compile Stmboot files ,**Stmboot.ino** file using arduino IDE ,select Tools ,Upload method ,**"Serial" **and press upload button.All this setup is using the same custom cable and USB-serial device(FTDI) as before.
1. Compile multiprotocol source in arduino IDE ,choose this time Upload method **STM32duino bootloader** ,select **"Export compiled Binary"** to show the binary file in the same folder as source. 1. Compile multiprotocol source in arduino IDE ,choose this time Upload method **STM32duino bootloader** ,select **"Export compiled Binary"** to show the binary file in the same folder as source.
1.Take this resulted binary file and move it to TX SD card ,firmware folder. 1. Take this resulted binary file and move it to TX SD card ,firmware folder.
1. Now flash the TX with the last TX firmware(for ersky9x is version P221 "e2" test version and higher).
1. Enter in TX maintenance mode(for ersky9X start TX with both bottom trims pushed outwards).Select **Update multi** press menu button then the multiprotocol.bin file (see the correct name) select also the right com port,update and press menu for flashing. You'll see a bar fill slowly .Wait for the procces to be complete
## Flashing precompiled binaries: ## Flashing precompiled binaries: