diff --git a/BootLoaders/README.md b/BootLoaders/README.md
index 60a1ce3..272afc3 100644
--- a/BootLoaders/README.md
+++ b/BootLoaders/README.md
@@ -1,5 +1,5 @@
 # Arduino IDE board definitions for Multi 4-in-1
-Board definitions are available for both the Atmega328p and STM32F103C boards.  The board definitions make it easier to compile and install the multiprotocol module firmware.
+Board definitions are available for the Atmega328p, STM32, and OrangeRX modules.  The board definitions make it easier to compile and install the multiprotocol module firmware.
 
 ## Installing
 The board definitions are installed using the Arduino IDE Boards Manager.
@@ -32,13 +32,15 @@ The board definitions are installed using the Arduino IDE Boards Manager.
 ## Verify the boards are installed
 1. Click **Tools -> Board**
 2. Scroll down the list to the **Multi 4-in-1** board headings verify that the boards you installed are available:
-  * **Multi 4-in-1 (Atmega328p, 3.3V, 16MHz)** for the Atmega board
-  * **Multi 4-in-1 (STM32F103CB)** for the STM32 board
-  
-    ![Image of Yaktocat](/docs/images/boards-menu.jpg)
+    ![Image](/docs/images/boards-menu.jpg)
+    
+    * **Multi 4-in-1 (Atmega328p, 3.3V, 16MHz)** for the Atmega module
+    * **Multi 4-in-1 (STM32F103CB)** for the STM32 module
+    * **Multi 4-in-1 (OrangeRX)** for the OrangeRX module
 
 ## Compiling and Uploading
 Refer to the hardware-specific pages for information on compiling the firmware and uploading it to the multiprotocol module:
 
 * [Compiling for Atmega](/docs/Compiling.md)
 * [Compiling for STM32](/docs/Compiling_STM32.md)
+* [Compiling for OrangeRX](/docs/Compiling_OrangeTx.md)