gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-03 12:07:52 +00:00
Code Issues Projects Releases Wiki Activity

Flashing info

Browse Source
This commit is contained in:
midelic 2016-08-01 16:26:12 +03:00 committed by GitHub
parent 8fd4ad981d
commit 1caec55ea6
1 changed files with 1 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
README.md
View File

@ -312,7 +312,7 @@ Before uploading new firmware use a jumper on BOOT0.After flashing new firmware
###Warning!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ###Warning!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
After flashing new firmware it is mandatory to remove the 3.3V jumper if installed.If not when starting the module and micro you may fry them as 5V is supplied directly on the RF module and micro. After flashing new firmware it is mandatory to remove the 3.3V jumper if installed.If not when starting the module and micro you may fry them as 5V is supplied directly on the RF module and micro.Extreme care ,do not flash with 5V setting on USB-SERIAL and 3.3V jumper attached.If in doubt measure the serial device output with a multimeter.
##Troubleshooting ##Troubleshooting