From 1933f4bcc8754d56e9bf4f52fae446443a491e7c Mon Sep 17 00:00:00 2001 From: gerrievanzyl Date: Mon, 3 Oct 2016 15:31:26 -0400 Subject: [PATCH] Update Transmitters.md --- docs/Transmitters.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/Transmitters.md b/docs/Transmitters.md index ec55c79..d36444c 100644 --- a/docs/Transmitters.md +++ b/docs/Transmitters.md @@ -61,15 +61,16 @@ Transmitter|Firmware Options|Telemetry Enabled Click on your transmitter above to view specific setup instructions. -##Optional Telemetry mod for 9X/r TH9X transmitters + +##Optional Telemetry mod for 9X/r TH9X transmitters The telemetry mod for these transmitters has evolved. The original and popular "FrSky Telemetry Mod" requires 2 pins on the transmitter module board to be modified (RX on pin 5 and TX on pin 2). All the recent MPTM hardware options supports serial transmission on pin 1 (the same pin as the PPM signal) so, in this case, only the mod on pin 5 is required. A good tutorial to follow is Oscar Liang's [here](http://blog.oscarliang.net/turnigy-9x-advance-mod/) but when you get to wiring up the Tx Module bay pins, you only need to perform the steps relevant for Pin 5. -You can see Midelic's original instructions [here](http://www.rcgroups.com/forums/showpost.php?p=28359305&postcount=2) +You can see Midelic's original instructions [here](http://www.rcgroups.com/forums/showpost.php?p=28359305&postcount=2) -Other Notes: +##Other Notes: - er9X and erSky9X firmware already supports Multiprotocol Module as a standard feature. At time of writing it looks like that the next major release of OpenTx - OpenTx 2.2 - will have DIY Mulitprotocol support as a standard feature. - Owners of Walkera Devo transmitters should look at the [Deviation-Tx](http://www.deviationtx.com) project for how to achieve the same end goal with your transmitters.