Add files via upload

Lua_scripts/pidDsm.lua

@@ -0,0 +1,127 @@
+--
+-- This telemetry script displays the Flight Log Gain
+-- Parameters streamed from the Blade 150S Spektrum AR6335A
+-- Flybarless Controller.
+
+-- The script facilitates the setting of the FBL's
+-- Gain Parameters including PID  for both
+-- cyclic and tail.  It is similar to the Telemetry Based
+-- Text Generator available on Spektrum transmitters.
+
+-- Supporting similar Blade micros such as the Fusion 180
+-- would possibly require minor modifications to this script. 
+
+-- This script reads telemetry data from the Spektrum
+-- receiver and thus functionality relies on data being
+-- captured by the OpenTX transmitter.  A DSM
+-- telemetry-ready module is required.  Please see the
+-- MULTI-Module project at https://www.multi-module.org/.
+
+-- The only supported display is the Taranis'.  It may work
+-- with higher res screens.
+--
+
+
+-- Sensor names
+local PSensor = "FdeA"
+local ISensor = "FdeB"
+local DSensor = "FdeL"
+local RSensor = "FdeR"
+local ActiveParamSensor = "Hold"
+
+local tags = {"P", "I", "D"}
+
+
+local function getPage(iParam)
+  -- get page from 0-based index
+  -- {0,1,2,3}: cyclic (1), {4,5,6,7}: tail (2)
+  local res = (math.floor(iParam/4)==0) and 1 or 2
+  return res
+end
+
+function round(v)
+  -- round float
+  local factor = 100
+  return math.floor(v * factor + 0.5) / factor
+end
+
+
+local function readValue(sensor)
+  -- read from sensor, round and return
+  local v = getValue(sensor)
+  v = round(v)
+  return v
+end
+ 
+local function readActiveParamValue(sensor)
+  --  read and return a validated active parameter value
+  local v = getValue(sensor)
+  if (v<1 or v>8) then
+    return nil
+  end
+  return v
+end
+   
+local function readParameters()
+  -- read and return parameters
+  local p = readValue(PSensor)
+  local i = readValue(ISensor)
+  local d = readValue(DSensor)
+  local r = readValue(RSensor)
+  local a = readActiveParamValue(ActiveParamSensor)
+  return {p,i,d,r,a}
+end
+
+local function drawParameters()
+  -- draw labels and params on screen
+  local params = readParameters()
+  local activeParam = params[5]
+  
+  -- if active gain does not validate then assume
+  -- Gain Adjustment Mode is disabled
+  if not activeParam then
+    lcd.clear()
+    lcd.drawText(20,30,"Please enter Gain Adjustment Mode")
+    return
+  end
+  
+  local activePage = getPage(activeParam-1)
+  for iParam=0,7 do
+    -- highlight selected parameter
+    local attr = (activeParam==iParam+1) and 2 or 0
+    -- circular index (per page)
+    local perPageIndx = iParam % 4 + 1
+    -- check if displaying cyclic params.
+    local isCyclicPage = (getPage(iParam)==1)
+    -- set y draw coord
+    local y = perPageIndx*10+2
+    
+    -- labels
+    local x = isCyclicPage and 6 or 120
+    -- labels are P,I,D for both pages except for last param
+    local val = iParam==3 and "Response" or
+                  (iParam==7 and "Filtering" or tags[perPageIndx])
+    lcd.drawText (x, y, val, attr)
+    
+    -- gains
+    -- set all params for non-active page to '--' rather than 'last value'
+    val = (getPage(iParam)==activePage) and params[perPageIndx] or '--'
+    x = isCyclicPage and 70 or 180
+    lcd.drawText (x, y, val, attr)
+  end
+end
+
+
+local function run_func(event)
+  -- TODO: calling clear() on every function call redrawing all labels is not ideal
+  lcd.clear()
+  lcd.drawText (8, 2, "Cyclic (0...200)")
+  lcd.drawText (114, 2, "Tail (0...200)")
+  drawParameters()
+end
+
+local function init_func() end
+local function bg_func() end
+
+
+return { run=run_func, background=bg_func, init=init_func  }