diff --git a/docs/Compiling.md b/docs/Compiling.md
index 7800625..d4c2c45 100644
--- a/docs/Compiling.md
+++ b/docs/Compiling.md
@@ -15,23 +15,14 @@ The procedure below will guide you through all the steps to upload successfully
 
 ### Material you need to upload the firmware
 
-1. USBASP programmer supporting 3.3V:
-<img src="images/USBasp_Programmer.jpeg" width="200" height="200" />
-[Example aliexpress link](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs)
+1. USBASP programmer supporting 3.3V: <img src="images/USBasp_Programmer.jpeg" width="200" height="200"/> [Example aliexpress link](https://www.aliexpress.com/item/USBasp-USB-ISP-3-3V-5V-AVR-Programmer-USB-ATMEGA8-ATMEGA128-New-10PIN-Wire-Support/2036402518.html?spm=2114.30010308.8.10.jIbHzs)
 There are reports that some of the cheap programmers are not safe to use with 3.3V units, usually the black PCB versions are ok.
-1. 10pin to 6pin adapter:
-<img src="images/10pin_2_6pin.JPG" width="150" height="150" />
-[Example ebay link](http://www.ebay.fr/itm/10-Pin-a-6-Pin-Carte-Adaptateur-M-F-pour-AVRISP-USBASP-STK500-Noir-Bleu-WT-/291862396761?hash=item43f45abf59:g:gXsAAOSwMgdXyGnh)
-1. 6 pin header like this one:
-<img src="images/6pin_header.jpg" width="100" height="100" />
-[Example Digi-Key link](http://www.digikey.com/products/en?keywords=3M%20961206-6404-AR)
+1. 10pin to 6pin adapter: <img src="images/10pin_2_6pin.JPG" width="150" height="150"/> [Example ebay link](http://www.ebay.fr/itm/10-Pin-a-6-Pin-Carte-Adaptateur-M-F-pour-AVRISP-USBASP-STK500-Noir-Bleu-WT-/291862396761?hash=item43f45abf59:g:gXsAAOSwMgdXyGnh)
+1. 6 pin header like this one: <img src="images/6pin_header.jpg" width="100" height="100"/> [Example Digi-Key link](http://www.digikey.com/products/en?keywords=3M%20961206-6404-AR)
 1.The 6 Pin header needs to be solder on the board like indicated by the red rectangle:
-  - Banggood readymade 4-in-1 module:
-<img src="images/V2b_ISP.jpeg" width="189" height="200" />
-  - DIY Mulitprotocol modules (like the 2.3d board):
-<img src="images/MPTM_PCB_2.3d_ISP.png" width="486" height="201" />
-  - Arduino Pro Mini module:
-<img src="images/ProMini_ISP.png" width="195" height="200" />
+   * Banggood readymade 4-in-1 module: <img src="images/V2b_ISP.jpeg" width="189" height="200"/>
+   * DIY Mulitprotocol modules (like the 2.3d board): <img src="images/MPTM_PCB_2.3d_ISP.png" width="486" height="201"/>
+   * Arduino Pro Mini module: <img src="images/ProMini_ISP.png" width="195" height="200"/>
 
 ### Connect the programmer