gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-09 22:38:10 +00:00
Code Issues Projects Releases Wiki Activity

Update Troubleshooting.md

Browse Source 
Cosmetic amelioration.
This commit is contained in:
Sebastien Charpentier 2017-04-19 15:08:36 +02:00 committed by GitHub
parent 86787b6099
commit 11b18f7468
1 changed files with 9 additions and 9 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
docs/Troubleshooting.md
View File

@ -4,18 +4,18 @@
### Green LED
- Off: no power to the module
- On: module is powered up
- **_Off_**: no power to the module
- **_On_**: module is powered up
### Red LED (bind LED)
- Off: program not running or a protocol selected with the associated module not installed
- Flash(on=0.05s,off=1s): invalid protocol selected (excluded from compilation or invalid protocol number)
- Inverted Flash(on=1s,off=0.1s): module is waiting for a bind event (Bind from channel or Bind in radio GUI) to launch the protocol in bind mode
- Fast blink(on=0.1s,off=0.1s): bind in progress
- Slow blink(on=0.5s,off=0.5s): serial has been selected but no valid signal is being seen on the RX pin.
- Slower blink(on=1s,off=1s): PPM has been selected but no valid signal is being seen on the PPM pin.
- On: Module is in normal operation mode (transmitting control signals).
- **_Off_**: program not running or a protocol selected with the associated module not installed
- **_Flash(on=0.05s,off=1s)_**: invalid protocol selected (excluded from compilation or invalid protocol number)
- **_Inverted Flash(on=1s,off=0.1s)_**: module is waiting for a bind event (Bind from channel or Bind in radio GUI) to launch the protocol in bind mode
- **_Fast blink(on=0.1s,off=0.1s)_**: bind in progress
- **_Slow blink(on=0.5s,off=0.5s)_**: serial has been selected but no valid signal is being seen on the RX pin.
- **_Slower blink(on=1s,off=1s)_**: PPM has been selected but no valid signal is being seen on the PPM pin.
- **_On_**: Module is in normal operation mode (transmitting control signals).
## Protocol selection