gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 22:38:14 +00:00
Code Issues Projects Releases Wiki Activity

Update Flash_from_Tx.md

Browse Source
This commit is contained in:
pascallanger 2018-11-21 16:57:17 +01:00 committed by GitHub
parent 3a21bf69f1
commit 0eee1c5d15
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

9
docs/Flash_from_Tx.md
View File

@ -42,14 +42,13 @@ For radios running ersky9x and OpenTX, there is an option to flash a precompiled
1. Remove the SD card from the transmitter and mount it using a suitable reader 1. Remove the SD card from the transmitter and mount it using a suitable reader
1. Copy the pre-compiled firmware file into the `\FIRMWARE` folder of the SD card (create the folder if it does not exist) 1. Copy the pre-compiled firmware file into the `\FIRMWARE` folder of the SD card (create the folder if it does not exist)
1. Power the transmitter off and remove the USB cable or put the SD card back in the transmitter 1. Power the transmitter off and remove the USB cable or put the SD card back in the transmitter
1. Push both horizontals trims inwards (close to each others) 1. Push both horizontals trims inwards (close to each others) while powering on the radio
1. Power on the radio
1. The screen title should indicate `Boot Loader V2.9Ready` or newer 1. The screen title should indicate `Boot Loader V2.9Ready` or newer
1. Launch the `FlashMulti_xxx.app` app from the `Run App` menu 1. Launch the `FlashMulti_xxx.app` app from the `Run App` menu
1. Choose the appropriate file type 1. Choose the appropriate file type
1. **HEX** to update an Atmega328p module 1. `HEX` to update an Atmega328p module
1. **BIN** to update an STM32 module 1. `BIN` to update an STM32 module
1. Select **Update** 1. Select `Update`
1. Choose the firmware file to flash, long press to select it 1. Choose the firmware file to flash, long press to select it
1. Long press again to flash the selected file to the module 1. Long press again to flash the selected file to the module
1. When flashing has finished, long press EXIT to reboot in normal mode 1. When flashing has finished, long press EXIT to reboot in normal mode