gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 21:48:12 +00:00
Code Issues Projects Releases Wiki Activity

XN297dump: Auto mode small fix

Browse Source
This commit is contained in:
Pascal Langer 2020-06-02 14:34:50 +02:00
parent aeb8d67219
commit 0d97af5ae2
2 changed files with 8 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
Multiprotocol/XN297Dump_nrf24l01.ino
View File

@ -392,6 +392,9 @@ static uint16_t XN297Dump_callback()
{ // Scan frequencies { // Scan frequencies
hopping_frequency_no++; hopping_frequency_no++;
bind_counter=0; bind_counter=0;
if(packet_count && packet_count<=5)
debug("\r\nTrying RF channel: ");
packet_count=0;
if(hopping_frequency_no>XN297DUMP_MAX_RF_CHANNEL) if(hopping_frequency_no>XN297DUMP_MAX_RF_CHANNEL)
{ {
debug("\r\n\r\n%d RF channels identified:",rf_ch_num); debug("\r\n\r\n%d RF channels identified:",rf_ch_num);
@ -472,10 +475,9 @@ static uint16_t XN297Dump_callback()
debug(" %02X",packet[i]); debug(" %02X",packet[i]);
packet_count++; packet_count++;
if(packet_count>5) if(packet_count>5)
{ {//change channel
bind_counter=XN297DUMP_PERIOD_SCAN+1; bind_counter=XN297DUMP_PERIOD_SCAN+1;
debug("\r\nTrying RF channel: "); debug("\r\nTrying RF channel: ");
packet_count=0;
} }
} }
} }

7
Protocols_Details.md
View File

@ -489,9 +489,9 @@ Models: Graupner HoTT receivers (tested on GR-12, GR-12L, GR-16 and Vector).
Extended limits, failsafe and LBT supported. Extended limits, failsafe and LBT supported.
Full telemetry and full text config mode are available in OpenTX 2.3.8+. Full telemetry and full text config mode are available starting from OpenTX 2.3.8N226.
**RX_Num is used to give a number a given RX. You must use a different RX_Num per RX. A maximum of 64 HoTT RXs are supported.** **RX_Num is used to give a number to a given RX. You must use a different RX_Num per RX. A maximum of 64 HoTT RXs are supported.**
**Failsafe MUST be configured once with the desired channel values (hold or position) while the RX is up (wait 10+sec for the RX to learn the config) and then failsafe MUST be set to RX/Receiver otherwise the servos will jitter!!!** **Failsafe MUST be configured once with the desired channel values (hold or position) while the RX is up (wait 10+sec for the RX to learn the config) and then failsafe MUST be set to RX/Receiver otherwise the servos will jitter!!!**
@ -508,7 +508,8 @@ CH1|CH2|CH3|CH4|CH5|CH6|CH7|CH8|CH9|CH10|CH11|CH12
Recommended for best telemetry performance. Recommended for best telemetry performance.
### Sub_protocol No_Sync - *1* ### Sub_protocol No_Sync - *1*
Compatibility mode with older receiver firmwares. Telemetry compatibility mode when Sync does not work due to an old firmware on the RX.
You should definitively upgrade your receivers/sensors to the latest firmware versions: https://www.rcgroups.com/forums/showpost.php?p=44668015&postcount=18022
## Scanner - *54* ## Scanner - *54*
2.4GHz scanner accessible using the OpenTX 2.3 Spectrum Analyser tool. 2.4GHz scanner accessible using the OpenTX 2.3 Spectrum Analyser tool.