gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-22 09:23:15 +00:00
Code Issues Projects Releases Wiki Activity

WAIT_FOR_BIND feature

Browse Source 
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
This commit is contained in:
pascallanger
2017-02-10 17:37:58 +01:00
parent 72052925a6
commit 0c5fae01b5
5 changed files with 340 additions and 287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
Multiprotocol/_Config.h
View File

@@ -31,11 +31,24 @@
//#define REVERSE_THROTTLE
//#define REVERSE_RUDDER
//Comment to disable the bind feature on a channel
/*************************/
/*** BIND FROM CHANNEL ***/
/*************************/
//Bind from channel enables you to bind when a specified channel is giong from low to high. This feature is only active
// if you specify AUTOBIND in PPM mode or set AutoBind to YES for serial mode. It also requires that the throttle channel is low.
//Comment to globaly disable the bind feature from a channel.
#define ENABLE_BIND_CH
//Set the channel number used for bind. Default is 16.
#define BIND_CH 16
//Comment to disable the wait for bind feature. This feature will not activate the selected
// protocol unless a bind is requested using bind from channel or the GUI "Bind" button.
//The goal is to prevent binding other people's model when powering up the TX, changing model or scanning through protocols.
#define WAIT_FOR_BIND
/**************************/
/*** RF CHIPS INSTALLED ***/
@@ -57,6 +70,7 @@
//All the protocols will not fit in the Atmega328p module so you need to pick and choose.
//Comment the protocols you are not using with "//" to save Flash space.
//The protocols below need an A7105 to be installed
#define FLYSKY_A7105_INO
#define HUBSAN_A7105_INO
@@ -94,6 +108,7 @@
#define HONTAI_NRF24L01_INO
#define Q303_NRF24L01_INO
/**************************/
/*** TELEMETRY SETTINGS ***/
/**************************/