gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-12-30 08:43:16 +00:00
Code Issues Projects Releases Wiki Activity

WAIT_FOR_BIND feature

Browse Source 
This feature will not activate the selected protocol unless a bind is
requested using bind from channel or the GUI "Bind" button. It is only
enabled if bind from channel and autobind are set since I think they are
working well together.
The goal is to prevent binding other people's model when powering up the
TX, changing model or scanning through protocols.
There is a new blinking pattern associated to it as well as a new status
"Waiting for bind".
This feature is enabled by default in _config.h .
This commit is contained in:
pascallanger
2017-02-10 17:37:58 +01:00
parent 72052925a6
commit 0c5fae01b5
5 changed files with 340 additions and 287 deletions
Download Patch File Download Diff File Expand all files Collapse all files

17
Multiprotocol/Multiprotocol.h
View File

@@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 1
#define VERSION_REVISION 6
#define VERSION_PATCH_LEVEL 16
#define VERSION_PATCH_LEVEL 17
//******************
// Protocols
//******************
@@ -284,11 +284,17 @@ enum MultiPacketTypes {
#define INPUT_SIGNAL_on protocol_flags2 |= _BV(5)
#define IS_INPUT_SIGNAL_on ( ( protocol_flags2 & _BV(5) ) !=0 )
#define IS_INPUT_SIGNAL_off ( ( protocol_flags2 & _BV(5) ) ==0 )
//CH16
//Bind from channel
#define BIND_CH_PREV_off protocol_flags2 &= ~_BV(6)
#define BIND_CH_PREV_on protocol_flags2 |= _BV(6)
#define IS_BIND_CH_PREV_on ( ( protocol_flags2 & _BV(6) ) !=0 )
#define IS_BIND_CH_PREV_off ( ( protocol_flags2 & _BV(6) ) ==0 )
//Wait for bind
#define WAIT_BIND_off protocol_flags2 &= ~_BV(7)
#define WAIT_BIND_on protocol_flags2 |= _BV(7)
#define IS_WAIT_BIND_on ( ( protocol_flags2 & _BV(7) ) !=0 )
#define IS_WAIT_BIND_off ( ( protocol_flags2 & _BV(7) ) ==0 )
//********************
//*** Blink timing ***
@@ -296,8 +302,11 @@ enum MultiPacketTypes {
#define BLINK_BIND_TIME 100
#define BLINK_SERIAL_TIME 500
#define BLINK_PPM_TIME 1000
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_BAD_PROTO_TIME_HIGH 50
#define BLINK_BAD_PROTO_TIME_LOW 1000
#define BLINK_WAIT_BIND_TIME_HIGH 1000
#define BLINK_WAIT_BIND_TIME_LOW 100
//*******************
//*** AUX flags ***
@@ -600,6 +609,7 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
0x02 = Serial mode enabled
0x04 = protocol is valid
0x08 = module is in binding mode
0x10 = module waits a bind event to load the protocol
[3] major
[4] minor
[5] revision
@@ -633,6 +643,7 @@ Serial: 100000 Baud 8e2 _ xxxx xxxx p --
0x02 = Serial mode enabled
0x04 = protocol is valid
0x08 = module is in binding mode
0x10 = module waits a bind event to load the protocol
[5] major
[6] minor
[7] revision