diff --git a/Multiprotocol/FrSkyDVX_common.ino b/Multiprotocol/FrSkyDVX_common.ino
index ec9fbf8..d281516 100644
--- a/Multiprotocol/FrSkyDVX_common.ino
+++ b/Multiprotocol/FrSkyDVX_common.ino
@@ -105,6 +105,23 @@ void FrSkyX2_init_hop(void)
 	hopping_frequency[47] = 0;									//Bind freq
 }
 
+uint8_t hw_ver=0x02;
+
+void Frsky_init_clone(void)
+{
+  uint16_t temp = FRSKY_RX_EEPROM_OFFSET;
+  temp++;
+  rx_tx_addr[3] = eeprom_read_byte((EE_ADDR)temp++);
+  rx_tx_addr[2] = eeprom_read_byte((EE_ADDR)temp++);
+  hw_ver = eeprom_read_byte((EE_ADDR)temp++);
+  temp++;
+  for (uint8_t ch = 0; ch < 47; ch++)
+  {
+    hopping_frequency[ch] = eeprom_read_byte((EE_ADDR)temp++);
+  }
+  debugln("Clone mode");
+}
+
 #endif
 /******************************/
 /**  FrSky V, D and X routines  **/
diff --git a/Multiprotocol/FrSkyX_cc2500.ino b/Multiprotocol/FrSkyX_cc2500.ino
index 6c00054..1fd8ded 100644
--- a/Multiprotocol/FrSkyX_cc2500.ino
+++ b/Multiprotocol/FrSkyX_cc2500.ino
@@ -42,7 +42,7 @@ static void __attribute__((unused)) FrSkyX_build_bind_packet()
 		packet[8] = hopping_frequency[idx++];
 		packet[9] = hopping_frequency[idx++];
 		packet[10] = hopping_frequency[idx++];
-		packet[11] = 0x02;					// Unknown but constant ID?
+		packet[11] = hw_ver;					// Unknown but constant ID?
 		packet[12] = RX_num;
 		//
 		memset(&packet[13], 0, packet_size - 14);
@@ -54,7 +54,7 @@ static void __attribute__((unused)) FrSkyX_build_bind_packet()
 	else
 	{
 		//packet 1D 03 01 0E 1C 02 00 00 32 0B 00 00 A8 26 28 01 A1 00 00 00 3E F6 87 C7 00 00 00 00 C9 C9
-		packet[5] = 0x02;					// Unknown but constant ID?
+		packet[5] = hw_ver;					// Unknown but constant ID?
 		packet[6] = RX_num;
 		//Bind flags
 		packet[7]=0;
@@ -119,7 +119,7 @@ static void __attribute__((unused)) FrSkyX_build_packet()
 	packet[0] = packet_size;			// Number of bytes in the packet (after this one)
 	packet[1] = rx_tx_addr[3];			// ID
 	packet[2] = rx_tx_addr[2];			// ID
-	packet[3] = 0x02;					// Unknown but constant ID?
+	packet[3] = hw_ver;					// Unknown but constant ID?
 	//  
 	packet[4] = (FrSkyX_chanskip<<6)|hopping_frequency_no; 
 	packet[5] = FrSkyX_chanskip>>2;
@@ -385,8 +385,9 @@ uint16_t ReadFrSkyX()
 uint16_t initFrSkyX()
 {
 	set_rx_tx_addr(MProtocol_id_master);
-
-	if(protocol==PROTO_FRSKYX)
+  if ((eeprom_read_byte((EE_ADDR)FRSKY_RX_EEPROM_OFFSET+4)==127) && (eeprom_read_byte((EE_ADDR)FRSKY_RX_EEPROM_OFFSET)<2))// bound in FRSKY-X RX-mode with RX Num 63 -> use clone mode
+    Frsky_init_clone();
+  else if(protocol==PROTO_FRSKYX)
 		Frsky_init_hop();
 	else
 	{
@@ -425,4 +426,4 @@ uint16_t initFrSkyX()
 	binding_idx=0;							// CH1-8 and Telem on
 	return 10000;
 }	
-#endif
\ No newline at end of file
+#endif
diff --git a/Multiprotocol/FrSky_Rx_cc2500.ino b/Multiprotocol/FrSky_Rx_cc2500.ino
index 9304f33..171311e 100644
--- a/Multiprotocol/FrSky_Rx_cc2500.ino
+++ b/Multiprotocol/FrSky_Rx_cc2500.ino
@@ -392,8 +392,17 @@ uint16_t FrSky_Rx_callback()
 					eeprom_write_byte((EE_ADDR)temp++, rx_tx_addr[2]);
 					debug("addr[2]=%02X, ", rx_tx_addr[2]);
 					debug("rx_num=%02X, ", packet[12]); // RX # (D16)
-					eeprom_write_byte((EE_ADDR)temp++, frsky_rx_finetune);
-					debugln("tune=%d", (int8_t)frsky_rx_finetune);
+          if (packet[12]==63)
+          {
+            // If RX Num is 63, write a finetune value of 127 to the EEPROM
+            // A real finetune value of 127 means, the frequency of module is out of range and the module should be replaced.
+            eeprom_write_byte((EE_ADDR)temp++, 127);
+          }
+          else
+          {
+            eeprom_write_byte((EE_ADDR)temp++, frsky_rx_finetune);
+            debugln("tune=%d", (int8_t)frsky_rx_finetune);
+          }
 					for (ch = 0; ch < 47; ch++)
 					{
 						eeprom_write_byte((EE_ADDR)temp++, hopping_frequency[ch]);