gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-01 01:57:52 +00:00
Code Issues Projects Releases Wiki Activity

DSMR timing

Browse Source
This commit is contained in:
pascallanger 2025-04-02 18:02:44 +02:00
parent abd26ee113
commit 082e96e381
2 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
Multiprotocol/DSM_cyrf6936.ino
View File

@ -292,7 +292,7 @@ uint16_t DSM_callback()
#define DSM_CH1_CH2_DELAY 4010 // Time between write of channel 1 and channel 2
#ifdef STM32_BOARD
#define DSM_WRITE_DELAY 1600 // Time after write to verify write complete
#define DSM_READ_DELAY 400 // Time before write to check read phase, and switch channels.
#define DSM_READ_DELAY 300 // Time before write to check read phase, and switch channels.
#else
#define DSM_WRITE_DELAY 1950 // Time after write to verify write complete
#define DSM_READ_DELAY 600 // Time before write to check read phase, and switch channels.
@ -470,15 +470,15 @@ uint16_t DSM_callback()
case DSM_CH2_READ_B:
//Read telemetry
rx_phase = CYRF_ReadRegister(CYRF_07_RX_IRQ_STATUS);
debug("ST1:%02X ",rx_phase);
//debug("ST1:%02X ",rx_phase);
if((rx_phase & 0x03) == 0x02) // RXC=1, RXE=0 then 2nd check is required (debouncing)
rx_phase |= CYRF_ReadRegister(CYRF_07_RX_IRQ_STATUS);
debug("ST2:%02X ",rx_phase);
//debug("ST2:%02X ",rx_phase);
if((rx_phase & 0x07) == 0x02)
{ // good data (complete with no errors)
CYRF_WriteRegister(CYRF_07_RX_IRQ_STATUS, 0x80); // need to set RXOW before data read
length=CYRF_ReadRegister(CYRF_09_RX_COUNT);
debug("RX(%d)",length);
//debug("RX(%d)",length);
if(length>TELEMETRY_BUFFER_SIZE-2)
length=TELEMETRY_BUFFER_SIZE-2;
CYRF_ReadDataPacketLen(packet_in+1, length);
@ -496,7 +496,7 @@ uint16_t DSM_callback()
// debug(" %02X", packet_in[i]);
telemetry_link=1;
}
debugln("");
//debugln("");
CYRF_WriteRegister(CYRF_29_RX_ABORT, 0x20); // Abort RX operation
if (phase == DSM_CH2_READ_A && (sub_protocol==DSM2_1F || sub_protocol==DSMX_1F) && num_ch < 8) // 22ms mode
{

2
Multiprotocol/Multiprotocol.h
View File

@ -19,7 +19,7 @@
#define VERSION_MAJOR 1
#define VERSION_MINOR 3
#define VERSION_REVISION 4
#define VERSION_PATCH_LEVEL 49
#define VERSION_PATCH_LEVEL 50
#define MODE_SERIAL 0