gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-07-03 12:07:52 +00:00
Code Issues Projects Releases Wiki Activity

Updated board

Browse Source
This commit is contained in:
midelic 2016-08-01 19:37:37 +03:00 committed by GitHub
parent 1caec55ea6
commit 08252fa2cf
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -236,7 +236,7 @@ The main program is running on an STM32F103CBT6 chip running @8MHz X-tal and 3.3
####Build your own board using [SMD components] ####Build your own board using [SMD components]
![Screenshot](https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/f2d598eacd8e9eebc3818adf47777199.png) ![Screenshot](https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/f2d598eacd8e9eebc3818adf47777199.png)
![Screenshot](https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/e3785d959caf01b68a11cd6d6dae57f2.png) ![Screenshot](https://644db4de3505c40a0444-327723bce298e3ff5813fb42baeefbaa.ssl.cf1.rackcdn.com/2026cfd1d0187a770570052590168df1.png)
[OSH Park link](https://oshpark.com/shared_projects/zcG1NEzu) if you want to order. [OSH Park link](https://oshpark.com/shared_projects/zcG1NEzu) if you want to order.
@ -330,7 +330,7 @@ After flashing new firmware it is mandatory to remove the 3.3V jumper if install
- Connect 1 to 4 of the selection protocol pins to GND. - Connect 1 to 4 of the selection protocol pins to GND.
####Input Mode - Serial ####Input Mode - Serial
Put dial switch on "zero" activates serial mode on multi.If you want to use permanetly serial mode there is n need of the dial switch installation. Put dial switch on "zero" activates serial mode on multi.If you want to use permanetly serial mode there is no need of the dial switch installation.
###Bind ###Bind
Make sure to follow this procedure: press the bind button, apply power and then release it after 1sec. The LED should be blinking fast indicating a bind status and then fixed on when the bind period is over. It's normal that the LED turns off when you press the bind button, this behavior is not controlled by the Atmega328. Make sure to follow this procedure: press the bind button, apply power and then release it after 1sec. The LED should be blinking fast indicating a bind status and then fixed on when the bind period is over. It's normal that the LED turns off when you press the bind button, this behavior is not controlled by the Atmega328.