mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-04 16:48:10 +00:00
Flash from TX
This commit is contained in:
parent
edd6432d4c
commit
06272575c5
@ -1,6 +1,6 @@
|
||||
# Compiling and Flashing (STM32)
|
||||
|
||||
Multiprotocol modules can be flashed with a precompiled firmware file (Option 1) or you can compile and upload your customized firmware using the Arduino IDE (Option 2).
|
||||
Multiprotocol modules can be flashed with a precompiled firmware file (Option 1 and 3) or you can compile and upload your customized firmware using the Arduino IDE (Option 2).
|
||||
|
||||
**These instructions are for the STM32 version of the Multiprotocol module.** If you are Compling for the Arduino ATmega328p version of the Multiprotocol Module please go to the dedicated [ATmega328](Compiling.md) page.
|
||||
|
||||
@ -19,7 +19,7 @@ Multiprotocol modules can be flashed with a precompiled firmware file (Option 1)
|
||||
1. [USB Port](#usb-port)
|
||||
1. [USB-to-Serial adapter](#usb-to-serial-adapter)
|
||||
1. [Upload the firmware](#upload-the-firmware)
|
||||
1. [Exporting compiled firmware](exporting-compiled-firmware)
|
||||
1. [Option 3 - Flash from TX](#flash-from-tx)
|
||||
1. [Troubleshooting](#troubleshooting)
|
||||
|
||||
## Tools required
|
||||
@ -151,10 +151,12 @@ In order to flash the bootloader the **BOOT0** jumper must be installed connecti
|
||||
## Upload the firmware
|
||||
1. In the Arduino IDE click **Sketch -> Upload**, or press **Ctrl+U**
|
||||
|
||||
## Exporting compiled firmware
|
||||
1. Click **Sketch -> Export compiled Binary**, or press **Ctrl+Alt+S**
|
||||
1. Locate the file named **multi-stm-x.x.x.x.bin** in the **Multiprotocol source folder** folder (x.x.x.x is the multi version)
|
||||
1. Follow the instructions [here](/docs/Flash_from_Tx.md) to upload the firmware using your radio
|
||||
## Flash from TX
|
||||
1. If you don't need/want to customize the multi module firmware then you can use pre-compiled binaries available [here](https://github.com/pascallanger/DIY-Multiprotocol-TX-Module/releases).
|
||||
2. If you are compiling the firmware yourself in the Arduino environment, do the following to export the binary:
|
||||
- Click **Sketch -> Export compiled Binary**, or press **Ctrl+Alt+S**
|
||||
- Locate the file named **multi-stm-x.x.x.x.bin** in the **Multiprotocol source folder** folder (x.x.x.x is the multi version)
|
||||
3. Follow the instructions [here](/docs/Flash_from_Tx.md) to upload the firmware using your radio
|
||||
|
||||
## Troubleshooting
|
||||
You can report your problem using the [GitHub issue](https://github.com/midelic/DIY-Multiprotocol-TX-Module/issues) system or go to the [Main thread on RCGROUPS](http://www.rcgroups.com/forums/showthread.php?t=2165676) to ask your question.
|
||||
|
Loading…
x
Reference in New Issue
Block a user