gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 17:58:13 +00:00
Code Issues Projects Releases Wiki Activity

_config.h descriptions update

Browse Source
This commit is contained in:
Pascal Langer 2018-09-13 17:25:49 -04:00
parent 63fb1b1f36
commit 058e09c413
1 changed files with 11 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
Multiprotocol/_Config.h
View File

@ -53,20 +53,19 @@
//For more throw, 1024..1976us @100% and 904..2096us @125%, remove the "//" on the line below. Be aware that too much throw can damage some UMX servos. To achieve standard throw in this mode use a channel weight of 84%.
//#define DSM_MAX_THROW
/*************************/
/*** BIND FROM CHANNEL ***/
/*************************/
/*****************/
/*** AUTO BIND ***/ // Also referred as "Bind on powerup"
/*****************/
//Bind from channel enables you to bind when a specified channel is going from low to high. This feature is only active
// if you specify AUTOBIND in PPM mode or set AutoBind to YES for serial mode. It also requires that the throttle channel is low.
//Comment to globaly disable the bind feature from a channel.
#define ENABLE_BIND_CH
//Set the channel number used for bind. Default is 16.
#define BIND_CH 16
//Comment to disable the wait for bind feature. This feature will not activate the selected
// protocol unless a bind is requested using bind from channel or the GUI "Bind" button.
//Comment to disable the wait for bind feature. If Autobind is enabled in the model config, this feature will not activate
// the selected protocol unless a bind is requested using bind from channel or the GUI "Bind" button.
//The goal is to prevent binding other people's model when powering up the TX, changing model or scanning through protocols.
#define WAIT_FOR_BIND
@ -75,7 +74,7 @@
/*** RF CHIPS ***/
/****************/
//There are 4 RF components supported. If one of them is not installed you must comment it using "//".
//If a chip is not installed all associated protocols are disabled.
//If a chip is not installed all associated protocols are automatically disabled.
//4-in-1 modules have all RF chips installed
//!!!If a RF chip is present it MUST be marked as installed!!! or weird things will happen you have been warned.
#define A7105_INSTALLED
@ -209,7 +208,7 @@
//Value between -125% and +125%. Default -100.
#define FAILSAFE_THROTTLE_LOW -100
//The radio using serial protocol can set failsafe data (ersky9x only for now).
//The radio using serial protocol can set failsafe data.
// Two options are available:
// a. replace the default failsafe data with serial failsafe data when they are received.
// b. wait for the radio to provide failsafe before sending it. Enable advanced settings like "FAILSAFE NOT SET" or "FAILSAFE RX".
@ -249,7 +248,7 @@
#define AFHDS2A_HUB_TELEMETRY // Use FrSkyD Hub format to send basic telemetry to TX like er9x
#define HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define BAYANG_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define BUGS_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define BUGS_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HUBSAN_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define CABELL_HUB_TELEMETRY // Use FrSkyD Hub format to send telemetry to TX
#define HITEC_HUB_TELEMETRY // Use FrSkyD Hub format to send basic telemetry to the radios which can decode it like er9x, ersky9x and OpenTX
@ -258,6 +257,7 @@
//SPORT_POLLING is an implementation of the same polling routine as XJT module for sport telemetry bidirectional communication.
//This is useful for passing sport control frames from TX to RX(ex: changing Betaflight PID or VTX channels on the fly using LUA scripts with OpentX).
//Using this feature requires to uncomment INVERT_TELEMETRY as this TX output on telemetry pin only inverted signal.
//!!!! This is a work in progress!!! Do not enable unless you want to test and report
//#define SPORT_POLLING
@ -266,7 +266,7 @@
/****************************/
//In this section you can configure the serial mode.
//The serial mode enables full editing of all the parameters in the GUI of the radio. It is enabled by placing the rotary switch on position 0.
//This is available natively for ER9X and ERSKY9X. It is available for OpenTX on Taranis with a special version.
//This is available natively for ER9X, ERSKY9X and OpenTX.
//If you do not plan to use the Serial mode comment this line using "//" to save Flash space
#define ENABLE_SERIAL