diff --git a/docs/BOM_DIY_STM32.md b/docs/BOM_DIY_STM32.md
index 10da55a..54c9feb 100644
--- a/docs/BOM_DIY_STM32.md
+++ b/docs/BOM_DIY_STM32.md
@@ -9,7 +9,7 @@ Digikey may not be your preferred supplier, but you should find enough informati
 ## IMPORTANT NOTE
 If your TX is Turnigy 9X,9XR,9XR+, the instalation of the inverter chip SN74LVC2G00DCTR ,it is  **OPTIONAL** not required.
 
-Aditinally in order to have telemetry you need to bridge solder **SJ1/SJ301** on the back of the board depending on which board version you have.
+Aditionally in order to have telemetry you need to bridge solder **SJ1/SJ301** on the back of the board depending on which board version you have.
 
 The inverted telemetry signal is required only by TARANIS TX so for this to work propperly , the inverter chip is necessary to be installed.
 
@@ -58,7 +58,7 @@ Qty|Part|Description|Value|Package|Digikey Part Number
 ## BOM DIY STM32 PCB - the V0.8
  This BOM is for the board that looks like the image below (avialble from OSHpark [here](https://oshpark.com/shared_projects/3IU1JXoN)) - check carefully:
  
-<img src="https://camo.githubusercontent.com/b46c53c214cf87184d202f57f328413d3629ca24/68747470733a2f2f36343464623464653335303563343061303434342d33323737323362636532393865336666353831336662343262616565666261612e73736c2e6366312e7261636b63646e2e636f6d2f36633561613434363133356336363336613030383064623763613238663162652e706e67"  width="300" height="400"/>
+<img src="images/Multi_STM32_V0.8_t_1.png"  width="300" height="400"/> <img src="images/Multi_STM32_V0.8_t_2.png"  width="300" height="400"/>
 
 Qty|Part|Description|Value|Package|Digikey Part Number
 ---|----|-----------|-----|-------|-------------------