mirror of
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git
synced 2025-02-05 07:48:14 +00:00
29 lines
1.5 KiB
Markdown
29 lines
1.5 KiB
Markdown
|
#Documentation ToDos
|
||
|
|
1. Documentation on all the FlySky boards: (MikeB?)
|
||
|
|
- SKY board erSky9x
|
||
|
|
- AR9X board erSky9x
|
||
|
|
- 9Xtreme board erSky9x
|
||
|
|
- AR9X UNI board
|
||
|
|
1. Add to the troubleshooting page
|
||
|
|
1. Document the OrangeRx Transmitter module (Mikeb?)
|
||
|
|
1. enabling Serial on the DIY PCB page
|
||
|
|
1. lots of pictures mentioned between the {} markers
|
||
|
|
2. Add how to wire the antenna switcher in the "solder your own board and use 4-in-1 Rf module (add pictures of the wires from the ATmega pins to PE1 and PE2)
|
||
|
|
3. Must this be added to the (Compiling for Taranis)Also, if you are using a Taranis, then you need to invert the telemetry as shown:
|
||
|
|
Code:
|
||
|
|
//Uncomment to invert the polarity of the telemetry serial signal.
|
||
|
|
//For ER9X and ERSKY9X it must be commented. For OpenTX it must be uncommented.
|
||
|
|
#define INVERT_TELEMETRY1
|
||
|
|
1. ~~restructure the transmitter setup documentation~~
|
||
|
|
- ~~PPM setup all on one page~~
|
||
|
|
- ~~Serial setup by Transmitter~~
|
||
|
|
|
||
|
|
1. PPM Telemetry: added different serial speeds based on protocol for none inverted telemetry:
|
||
|
|
FrSkyD (Incl Hubsan): 9600bps 8n1
|
||
|
|
FrSkyX: 57600bps 8n1
|
||
|
|
DSM: 125000bps 8n1
|
||
|
|
I've done this if people wants to connect something (arduino, bluetooth,...) behind the module to display telemetry when used in PPM mode. It's using the default speed of the original transmitter.
|
||
|
|
This is not something supported by er9x or ersky9x which are meant to be used in serial mode.
|
||
|
|
1. Someone to add the Build the board from scratch if it is still relevant
|
||
|
|
|