DIY-Multiprotocol-TX-Module/Multiprotocol/CYRF6936_SPI.ino

/*
 This project is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

 Multiprotocol is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
 */
#include "iface_cyrf6936.h"


void CYRF_WriteRegister(uint8_t address, uint8_t data)
{
	CYRF_CSN_off;
	SPI_Write(0x80 | address);
	SPI_Write(data);
	CYRF_CSN_on;
}

static void CYRF_WriteRegisterMulti(uint8_t address, const uint8_t data[], uint8_t length)
{
	uint8_t i;

	CYRF_CSN_off;
	SPI_Write(0x80 | address);
	for(i = 0; i < length; i++)
		SPI_Write(data[i]);
	CYRF_CSN_on;
}

static void CYRF_ReadRegisterMulti(uint8_t address, uint8_t data[], uint8_t length)
{
	uint8_t i;

	CYRF_CSN_off;
	SPI_Write(address);
	for(i = 0; i < length; i++)
		data[i] = SPI_Read();
	CYRF_CSN_on;
}

uint8_t CYRF_ReadRegister(uint8_t address)
{
	uint8_t data;
	CYRF_CSN_off;
	SPI_Write(address);
	data = SPI_Read();
	CYRF_CSN_on;
	return data;
}
//

uint8_t CYRF_Reset()
{
	CYRF_WriteRegister(CYRF_1D_MODE_OVERRIDE, 0x01);//software reset
	delayMicroseconds(200);// 
	// RS_HI;
	//  delayMicroseconds(100);
	// RS_LO;
	// delayMicroseconds(100);		  
	CYRF_WriteRegister(CYRF_0C_XTAL_CTRL, 0xC0); //Enable XOUT as GPIO
	CYRF_WriteRegister(CYRF_0D_IO_CFG, 0x04); //Enable PACTL as GPIO
	CYRF_SetTxRxMode(TXRX_OFF);
	//Verify the CYRD chip is responding
	return (CYRF_ReadRegister(CYRF_10_FRAMING_CFG) == 0xa5);//return if reset
}

/*
*
*/
void CYRF_GetMfgData(uint8_t data[])
{
	/* Fuses power on */
	CYRF_WriteRegister(CYRF_25_MFG_ID, 0xFF);

	CYRF_ReadRegisterMulti(CYRF_25_MFG_ID, data, 6);

	/* Fuses power off */
	CYRF_WriteRegister(CYRF_25_MFG_ID, 0x00); 
}

/*
* 1 - Tx else Rx
*/
void CYRF_SetTxRxMode(uint8_t mode)
{
	if(mode==TXRX_OFF)
	{
		CYRF_WriteRegister(CYRF_0F_XACT_CFG, 0x24); // 4=IDLE, 8=TX, C=RX
		CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x00); // XOUT=0 PACTL=0
	}
	else
	{
		//Set the post tx/rx state
		CYRF_WriteRegister(CYRF_0F_XACT_CFG, mode == TX_EN ? 0x28 : 0x2C); // 4=IDLE, 8=TX, C=RX
		if(mode == TX_EN)
			CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x80); // XOUT=1, PACTL=0
		else
			CYRF_WriteRegister(CYRF_0E_GPIO_CTRL,0x20);	// XOUT=0, PACTL=1
	}
}
/*
*
*/
void CYRF_ConfigRFChannel(uint8_t ch)
{
	CYRF_WriteRegister(CYRF_00_CHANNEL,ch);
}

/*
static void CYRF_SetPower_Value(uint8_t power)
{
	uint8_t val = CYRF_ReadRegister(CYRF_03_TX_CFG) & 0xF8;
	CYRF_WriteRegister(CYRF_03_TX_CFG, val | (power & 0x07));
}
*/

void CYRF_SetPower(uint8_t val)
{
	uint8_t power=CYRF_BIND_POWER;
	if(IS_BIND_DONE_on)
		power=IS_POWER_FLAG_on?CYRF_HIGH_POWER:CYRF_LOW_POWER;
	if(IS_RANGE_FLAG_on)
		power=CYRF_RANGE_POWER;
	CYRF_WriteRegister(CYRF_03_TX_CFG, val | power);
}

/*
*
*/
void CYRF_ConfigCRCSeed(uint16_t crc)
{
	CYRF_WriteRegister(CYRF_15_CRC_SEED_LSB,crc & 0xff);
	CYRF_WriteRegister(CYRF_16_CRC_SEED_MSB,crc >> 8);
}
/*
* these are the recommended sop codes from Cyrpress
* See "WirelessUSB LP/LPstar and PRoC LP/LPstar Technical Reference Manual"
*/
void CYRF_ConfigSOPCode(const uint8_t *sopcodes)
{
	//NOTE: This can also be implemented as:
	//for(i = 0; i < 8; i++) WriteRegister)0x23, sopcodes[i];
	CYRF_WriteRegisterMulti(CYRF_22_SOP_CODE, sopcodes, 8);
}

void CYRF_ConfigDataCode(const uint8_t *datacodes, uint8_t len)
{
	//NOTE: This can also be implemented as:
	//for(i = 0; i < len; i++) WriteRegister)0x23, datacodes[i];
	CYRF_WriteRegisterMulti(CYRF_23_DATA_CODE, datacodes, len);
}

void CYRF_WritePreamble(uint32_t preamble)
{
	CYRF_CSN_off;
	SPI_Write(0x80 | 0x24);
	SPI_Write(preamble & 0xff);
	SPI_Write((preamble >> 8) & 0xff);
	SPI_Write((preamble >> 16) & 0xff);
	CYRF_CSN_on;
}
/*
*
*/
static void CYRF_StartReceive()
{
	CYRF_WriteRegister(CYRF_05_RX_CTRL,0x87);
}

/*static void CYRF_ReadDataPacket(uint8_t dpbuffer[])
{
	CYRF_ReadRegisterMulti(CYRF_21_RX_BUFFER, dpbuffer, 0x10);
}
*/
void CYRF_ReadDataPacketLen(uint8_t dpbuffer[], uint8_t length)
{
    CYRF_ReadRegisterMulti(CYRF_21_RX_BUFFER, dpbuffer, length);
}

static void CYRF_WriteDataPacketLen(const uint8_t dpbuffer[], uint8_t len)
{
	CYRF_WriteRegister(CYRF_01_TX_LENGTH, len);
	CYRF_WriteRegister(CYRF_02_TX_CTRL, 0x40);
	CYRF_WriteRegisterMulti(CYRF_20_TX_BUFFER, dpbuffer, len);
	CYRF_WriteRegister(CYRF_02_TX_CTRL, 0xBF);
}

void CYRF_WriteDataPacket(const uint8_t dpbuffer[])
{
	CYRF_WriteDataPacketLen(dpbuffer, 16);
}

/*static uint8_t CYRF_ReadRSSI(uint8_t dodummyread)
{
	uint8_t result;
	if(dodummyread)
		CYRF_ReadRegister(CYRF_13_RSSI);
	result = CYRF_ReadRegister(CYRF_13_RSSI);
	if(result & 0x80)
		result = CYRF_ReadRegister(CYRF_13_RSSI);
	return (result & 0x0F);
}
*/
//NOTE: This routine will reset the CRC Seed
void CYRF_FindBestChannels(uint8_t *channels, uint8_t len, uint8_t minspace, uint8_t min, uint8_t max)
{
	#define NUM_FREQ 80
	#define FREQ_OFFSET 4
	uint8_t rssi[NUM_FREQ];

	if (min < FREQ_OFFSET)
		min = FREQ_OFFSET;
	if (max > NUM_FREQ)
		max = NUM_FREQ;

	uint8_t i;
	int8_t j;
	memset(channels, 0, sizeof(uint8_t) * len);
	CYRF_ConfigCRCSeed(0x0000);
	CYRF_SetTxRxMode(RX_EN);
	//Wait for pre-amp to switch from send to receive
	delayMicroseconds(1000);
	for(i = 0; i < NUM_FREQ; i++)
	{
		CYRF_ConfigRFChannel(i);
		CYRF_ReadRegister(CYRF_13_RSSI);
		CYRF_StartReceive();
		delayMicroseconds(10);
		rssi[i] = CYRF_ReadRegister(CYRF_13_RSSI);
	}

	for (i = 0; i < len; i++)
	{
		channels[i] = min;
		for (j = min; j < max; j++)
			if (rssi[j] < rssi[channels[i]])
				channels[i] = j;
		for (j = channels[i] - minspace; j < channels[i] + minspace; j++) {
			//Ensure we don't reuse any channels within minspace of the selected channel again
			if (j < 0 || j >= NUM_FREQ)
				continue;
			rssi[j] = 0xff;
		}
	}
	CYRF_SetTxRxMode(TX_EN);
}