gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 16:38:12 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol/Validate.h

159 lines
4.9 KiB
C
Raw Normal View History

STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
// Check selected board type
#if defined (STM32_BOARD) && defined (ORANGE_TX)
#error You must comment the board type STM32_BOARD in _Config.h to compile ORANGE_TX
#endif
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
//Atmega328p
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_MULTI_NO_BOOT) && not defined(ARDUINO_MULTI_FLASH_FROM_TX) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
Typos...
2016-10-18 09:27:14 +02:00
#error You must select one of these boards: "Multi 4-in-1", "Arduino Pro or Pro Mini" or "Arduino Mini"
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
#if defined (STM32_BOARD) && not defined (ORANGE_TX)
//STM32
#ifndef ARDUINO_GENERIC_STM32F103C
#error You must select the board type "Generic STM32F103C series"
#endif
#endif
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
//Change/Force configuration for the bootloader option
#if defined ARDUINO_MULTI_FLASH_FROM_TX
#define CHECK_FOR_BOOTLOADER
#endif
#if defined ARDUINO_MULTI_NO_BOOT
#undef CHECK_FOR_BOOTLOADER
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
//Change/Force configuration if OrangeTX
#ifdef ORANGE_TX
#undef ENABLE_PPM // Disable PPM for OrangeTX module
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef A7105_CSN_pin
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef CC25_CSN_pin
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef NRF_CSN_pin
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#endif
//Make sure protocols are selected correctly
#ifndef A7105_INSTALLED
#undef FLYSKY_A7105_INO
#undef HUBSAN_A7105_INO
Fixed compilation issues due to AFHDS2A introduction
2016-10-20 21:55:02 +02:00
#undef AFHDS2A_A7105_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#ifndef CYRF6936_INSTALLED
#undef DEVO_CYRF6936_INO
#undef DSM_CYRF6936_INO
#undef J6PRO_CYRF6936_INO
New protocol WK2x01 Protocol WK2x01 number 30 Sub protocols: - WK2801 number 0, 8 channels, fixed id not supported - WK2601 number 1, 6/7 channels, option is used see doc for details - WK2401 number 2, 4 channels Extended limits supported Autobind protocol Most receivers support WK2801 so always start trying this sub protocol first.
2017-01-03 19:19:53 +01:00
#undef WK2x01_CYRF6936_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#ifndef CC2500_INSTALLED
#undef FRSKYD_CC2500_INO
#undef FRSKYV_CC2500_INO
#undef FRSKYX_CC2500_INO
#undef SFHSS_CC2500_INO
#endif
#ifndef NRF24L01_INSTALLED
#undef BAYANG_NRF24L01_INO
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
#undef ESKY_NRF24L01_INO
#undef HISKY_NRF24L01_INO
#undef KN_NRF24L01_INO
#undef SLT_NRF24L01_INO
#undef SYMAX_NRF24L01_INO
#undef V2X2_NRF24L01_INO
#undef YD717_NRF24L01_INO
#undef MT99XX_NRF24L01_INO
#undef MJXQ_NRF24L01_INO
#undef SHENQI_NRF24L01_INO
#undef FY326_NRF24L01_INO
#undef FQ777_NRF24L01_INO
#undef ASSAN_NRF24L01_INO
#undef HONTAI_NRF24L01_INO
New protocol Q303 Q303 protocol number: 31 Sub ptotocols: - Q303 = 0 - CX35 = 1 - CX10D = 2 - CX10WD = 3
2017-01-24 16:58:41 +01:00
#undef Q303_NRF24L01_INO
GW008 protocol addition Protocol number: 32 No sub_protocol
2017-02-24 11:00:02 +01:00
#undef GW008_NRF24L01_INO
DM002 protocol protocol number 33 sub_protocol none=0 ch5=flip ch6=led ch7=headless
2017-03-22 14:55:55 +01:00
#undef DM002_NRF24L01_INO
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#undef CABELL_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
//Make sure telemetry is selected correctly
#ifndef TELEMETRY
#undef INVERT_TELEMETRY
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#undef AFHDS2A_FW_TELEMETRY
#undef AFHDS2A_HUB_TELEMETRY
#undef BAYANG_HUB_TELEMETRY
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#undef CABELL_HUB_TELEMETRY
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#undef HUBSAN_HUB_TELEMETRY
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef HUB_TELEMETRY
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
#undef SPORT_TELEMETRY
#undef DSM_TELEMETRY
Removed board option in _config.h
2017-02-06 21:50:56 +01:00
#undef MULTI_STATUS
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
#undef MULTI_TELEMETRY
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#else
Removed board option in _config.h
2017-02-06 21:50:56 +01:00
#if defined MULTI_TELEMETRY && not defined INVERT_TELEMETRY
#warning MULTI_TELEMETRY has been defined but not INVERT_TELEMETRY. They should be both enabled for OpenTX telemetry and status to work.
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(BAYANG_NRF24L01_INO)
#undef BAYANG_HUB_TELEMETRY
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#if not defined(CABELL_NRF24L01_INO)
#undef CABELL_HUB_TELEMETRY
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(HUBSAN_A7105_INO)
#undef HUBSAN_HUB_TELEMETRY
#endif
#if not defined(AFHDS2A_A7105_INO)
#undef AFHDS2A_HUB_TELEMETRY
#undef AFHDS2A_FW_TELEMETRY
#endif
#if not defined(FRSKYD_CC2500_INO)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef HUB_TELEMETRY
#endif
AFHDS2A again
2016-10-22 12:06:44 +02:00
#if not defined(FRSKYX_CC2500_INO)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef SPORT_TELEMETRY
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(DSM_CYRF6936_INO)
#undef DSM_TELEMETRY
AFHDS2A sub protocols and validation
2016-11-06 16:36:44 +01:00
#endif
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#if not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef TELEMETRY
#undef INVERT_TELEMETRY
#endif
#endif
//Make sure TX is defined correctly
#ifndef AILERON
#error You must select a correct channel order.
#endif
#if not defined(PPM_MAX_100) || not defined(PPM_MIN_100) || not defined(PPM_MAX_125) || not defined(PPM_MIN_125)
#error You must set correct TX end points.
#endif
Bind channel: configurable channel number Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
#if defined(ENABLE_BIND_CH)
#if BIND_CH<4
#error BIND_CH must be above 4.
#endif
#if BIND_CH>16
#error BIND_CH must be below or equal to 16.
#endif
#endif
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
#if MIN_PPM_CHANNELS>16
#error MIN_PPM_CHANNELS must be below or equal to 16. The default for this value is 4.
#endif
#if MIN_PPM_CHANNELS<2
#error MIN_PPM_CHANNELS must be larger than 1. The default for this value is 4.
#endif
#if MAX_PPM_CHANNELS<MIN_PPM_CHANNELS
#error MAX_PPM_CHANNELS must be higher than MIN_PPM_CHANNELS. The default for this value is 16.
#endif
#if MAX_PPM_CHANNELS>16
#error MAX_PPM_CHANNELS must be below or equal to 16. The default for this value is 16.
#endif
Reference in New Issue Copy Permalink