DIY-Multiprotocol-TX-Module/Multiprotocol/XK_ccnrf.ino

/*
 This project is free software: you can redistribute it and/or modify
 it under the terms of the GNU General Public License as published by
 the Free Software Foundation, either version 3 of the License, or
 (at your option) any later version.

Multiprotocol is distributed in the hope that it will be useful,
 but WITHOUT ANY WARRANTY; without even the implied warranty of
 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 GNU General Public License for more details.

 You should have received a copy of the GNU General Public License
 along with Multiprotocol.  If not, see <http://www.gnu.org/licenses/>.
 */
// Compatible with X450 and X420/X520 plane.

#if defined(XK_CCNRF_INO)

#include "iface_xn297.h"

//#define FORCE_XK_ORIGINAL_ID

#define XK_INITIAL_WAIT		500
#define XK_PACKET_PERIOD	4000
#define XK_RF_BIND_NUM_CHANNELS 8
#define XK_RF_NUM_CHANNELS	4
#define XK_PAYLOAD_SIZE		16
#define XK_BIND_COUNT		750					//3sec

static uint16_t __attribute__((unused)) XK_convert_channel(uint8_t num)
{
	uint16_t val;
	
	if(sub_protocol != XK_CARS)
	{
		// Introduce deadband on all channels to prevent twitching
		//debug("val:%d",val);
		val=convert_channel_8b_limit_deadband(num,0x00,0x80, 0xFF, 40)<<2;
		//debugln(",%d",val);
	}
	else
		val=convert_channel_16b_limit(num,0x00,0x3FF);
	
	// 1FF..01=left, 00=center, 200..3FF=right
	if(val==0x200)
		val=0;									// 0
	else
		if(val>0x200)
			val--;								// 200..3FE
		else
		{
			val=0x200-val;						// 200..01
			if(val==0x200)
				val--;							// 1FF..01
		}
	return val;
}

static void __attribute__((unused)) XK_send_packet()
{
	// RF channel
	XN297_Hopping((IS_BIND_IN_PROGRESS?0:XK_RF_BIND_NUM_CHANNELS)+(hopping_frequency_no>>1));
	hopping_frequency_no++;
	if(hopping_frequency_no >= (IS_BIND_IN_PROGRESS?XK_RF_BIND_NUM_CHANNELS*2:XK_RF_NUM_CHANNELS*2))
		hopping_frequency_no=0;
	
	// Build packet
	memset(packet,0x00,7);
	memset(&packet[10],0x00,5);

	packet[12]=0x40;
	packet[13]=0x40;
	if(IS_BIND_IN_PROGRESS)
		packet[14] = 0xC0;
	else
	{
		uint16_t val=convert_channel_10b(THROTTLE, false);
		packet[0] = val>>2;						// 0..255
		packet[12] |= val & 2;
		val=XK_convert_channel(RUDDER);
		packet[1] = val>>2;
		packet[12] |= (val & 2)<<2;
		val=XK_convert_channel(ELEVATOR);
		packet[2] = val>>2;
		packet[13] |= val & 2;
		val=XK_convert_channel(AILERON);
		packet[3] = val>>2;
		packet[13] |= (val & 2)<<2;
		
		memset(&packet[4],0x40,3);				// Trims
		
		if(Channel_data[CH5] > CHANNEL_MAX_COMMAND)
			packet[10] = 0x10; 					// V-Mode
		else
			if(Channel_data[CH5] > CHANNEL_MIN_COMMAND)
				packet[10] = 0x04; 				// 6G-Mode
		//0x00 default M-Mode
		
		packet[10] |= GET_FLAG(CH7_SW,0x80);	// Emergency stop momentary switch

		packet[11]  = GET_FLAG(CH8_SW,0x03)		// 3D/6G momentary switch
					 |GET_FLAG(CH6_SW,0x40);	// Take off momentary switch
		packet[14]  = GET_FLAG(CH9_SW,0x01)		// Photo momentary switch
					 |GET_FLAG(CH10_SW,0x2);	// Video momentary switch
		//debugln("P1:%02X,P12:%02X",packet[1],packet[12]);
	}

	crc=packet[0];
	for(uint8_t i=1; i<XK_PAYLOAD_SIZE-1;i++)
		crc+=packet[i];
	packet[15]=crc;

//	debug("C: %02X, P:",hopping_frequency[rf_ch_num]);
//	for(uint8_t i=0; i<XK_PAYLOAD_SIZE; i++)
//		debug(" %02X",packet[i]);
//	debugln("");
	
	// Send
	XN297_SetPower();			// Set tx_power
	XN297_SetTxRxMode(TX_EN);
	XN297_SetFreqOffset();		// Set frequency offset
	XN297_WritePayload(packet, XK_PAYLOAD_SIZE);
}

const uint8_t PROGMEM XK_bind_hop[XK_RF_BIND_NUM_CHANNELS]= { 0x07, 0x24, 0x3E, 0x2B, 0x47, 0x0E, 0x39, 0x1C };	// Bind

const uint8_t PROGMEM XK_tx_addr[]= { 0xB3, 0x67, 0xE9, 0x98, 0x3A, 0xEC, 0xA6, 0x59, 0xB2, 0x94, 0x2B, 0xA5, 0x37, 0xC5, 0x4A, 0xD3,
									  0x49, 0xA6, 0x83, 0xEB, 0x4B, 0xC9, 0x59, 0xD2, 0x65, 0x34, 0x6A, 0xD3, 0x2C, 0x96, 0x2A, 0xA9,
									  0x32, 0xB2, 0xB4, 0x49, 0xD3, 0x37, 0xE9 };

const uint8_t PROGMEM XK_hop[]= { 0x47, 0x3A, 0x4C, 0x39, 0x4D, 0x34, 0x4A, 0x3F, 0x45, 0x3E, 0x4B, 0x3D, 0x3B, 0x48, 0x40, 0x49,
								  0x46, 0x3C, 0x43, 0x38, 0x35, 0x42, 0x33, 0x44, 0x4E, 0x37, 0x44, 0x35, 0x37, 0x4E, 0x36, 0x41 };

static void __attribute__((unused)) XK_initialize_txid()
{
	//bind hop
	for(uint8_t i=0; i<XK_RF_BIND_NUM_CHANNELS; i++)
		hopping_frequency[i]=pgm_read_byte_near( &XK_bind_hop[i] );

	//GID
	packet[7]=rx_tx_addr[1];
	packet[8]=rx_tx_addr[2];
	packet[9]=rx_tx_addr[3];
	uint8_t sum=packet[7]+packet[8]+packet[9];
//	debugln("GID=%02X %02X %02X, sum=%d", packet[7],packet[8],packet[9],sum);
	
	//Normal hop
	uint8_t start=(sum&0x07)<<2;
//	debug("start=%d, hop=",start);
	for(uint8_t i=0; i<XK_RF_NUM_CHANNELS; i++)
	{
		hopping_frequency[ i + XK_RF_BIND_NUM_CHANNELS ]=pgm_read_byte_near( &XK_hop[ start + i ] );
//		debug("%02X ", hopping_frequency[ i + XK_RF_BIND_NUM_CHANNELS ]);
	}
//	debugln("");
	//Normal packet address
	start=(sum&0x1F)+((sum>>5)&0x03);
//	debug("start=%d, addr=",start);
	for(uint8_t i=0; i<5; i++)
	{
		rx_tx_addr[i]=pgm_read_byte_near( &XK_tx_addr[ start + i ] );
//		debug("%02X ", rx_tx_addr[ i ]);
	}
//	debugln("");

	#ifdef FORCE_XK_ORIGINAL_ID
		switch(RX_num%2)
		{
			default:
				//TX1 X8 X450
				//GID
				packet[7]=0x04;
				packet[8]=0x15;
				packet[9]=0x22;
				//Normal hop
				memcpy(&hopping_frequency[XK_RF_BIND_NUM_CHANNELS],(uint8_t*)"\x3B\x48\x40\x49", XK_RF_NUM_CHANNELS);	// freq and order verified
				//Normal packet address
				memcpy(rx_tx_addr,(uint8_t*)"\x2C\x96\x2A\xA9\x32",5);
				break;
			case 1:
				//TX2 X4 X420
				//GID
				packet[7]=0x13;
				packet[8]=0x24;
				packet[9]=0x18;
				//Normal hop
				memcpy(&hopping_frequency[XK_RF_BIND_NUM_CHANNELS],(uint8_t*)"\x36\x41\x37\x4E", XK_RF_NUM_CHANNELS);	// freq ok and order from xn297dump auto
				//Normal packet address
				memcpy(rx_tx_addr,(uint8_t*)"\xA6\x83\xEB\x4B\xC9",5);
				break;
		}
	#endif
}

static void __attribute__((unused)) XK_RF_init()
{
	XN297_Configure(XN297_CRCEN, XN297_SCRAMBLED, sub_protocol==X450 ? XN297_250K : XN297_1M );
	XN297_SetTXAddr((uint8_t*)"\x68\x94\xA6\xD5\xC3", 5);						// Bind address
	XN297_HoppingCalib(XK_RF_BIND_NUM_CHANNELS+XK_RF_NUM_CHANNELS);				// Calibrate all channels
}

uint16_t XK_callback()
{
	#ifdef MULTI_SYNC
		telemetry_set_input_sync(XK_PACKET_PERIOD);
	#endif
	if(bind_counter)
		if(--bind_counter==0)
		{
			BIND_DONE;
			XN297_SetTXAddr(rx_tx_addr, 5);										// Normal packets address
		}
	XK_send_packet();
	return XK_PACKET_PERIOD;
}

void XK_init()
{
	if(sub_protocol != XK_CARS)
		BIND_IN_PROGRESS;															// Autobind protocol
	XK_initialize_txid();
	XK_RF_init();
	hopping_frequency_no = 0;
	bind_counter=XK_BIND_COUNT;
}

#endif