gomaomao/DIY-Multiprotocol-TX-Module
1
0
Fork 0
mirror of https://github.com/pascallanger/DIY-Multiprotocol-TX-Module.git synced 2025-02-04 16:38:12 +00:00
Code Issues Projects Releases Wiki Activity
DIY-Multiprotocol-TX-Module/Multiprotocol/Validate.h

495 lines
16 KiB
C
Raw Normal View History

STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
// Check selected board type
#if defined (STM32_BOARD) && defined (ORANGE_TX)
#error You must comment the board type STM32_BOARD in _Config.h to compile ORANGE_TX
#endif
#if not defined (ORANGE_TX) && not defined (STM32_BOARD)
//Atmega328p
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
#if not defined(ARDUINO_AVR_PRO) && not defined(ARDUINO_MULTI_NO_BOOT) && not defined(ARDUINO_MULTI_FLASH_FROM_TX) && not defined(ARDUINO_AVR_MINI) && not defined(ARDUINO_AVR_NANO)
Typos...
2016-10-18 09:27:14 +02:00
#error You must select one of these boards: "Multi 4-in-1", "Arduino Pro or Pro Mini" or "Arduino Mini"
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#if F_CPU != 16000000L || not defined(__AVR_ATmega328P__)
#error You must select the processor type "ATmega328(5V, 16MHz)"
#endif
#endif
#if defined (STM32_BOARD) && not defined (ORANGE_TX)
//STM32
Add stm32 serial upload method which includes bootloader (#180)
2018-08-10 20:11:32 +01:00
#if not defined(ARDUINO_GENERIC_STM32F103C) && not defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX) && not defined(ARDUINO_MULTI_STM32_NO_BOOT) && not defined(ARDUINO_MULTI_STM32_WITH_BOOT)
Initial check-in for STM32 board
2017-11-27 21:19:49 +00:00
#error You must select one of these boards: "Multi 4-in-1 (STM32F103CB)" or "Generic STM32F103C series"
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#endif
Fix DSM telemetry and global cyrf6936 freq tunning - Fixed DSM telemetry with some RXs (R720X) - Global frequency tunning for all protocols using the CYRF6936 by adjusting channel 15 when enabled - Changed default DSM_THROTTLE_KILL_CH to use channel 14
2019-08-01 14:23:08 +02:00
// Check for minimum board file definition version for DIY multi-module boards
New boards with bin signatures
2019-10-04 10:14:52 +02:00
#define MIN_AVR_BOARD 110
#define MIN_ORX_BOARD 110
#define MIN_STM32_BOARD 117
Multi Module Board Definition Updates (#133)
2017-12-20 11:31:20 +00:00
//AVR
#if (defined(ARDUINO_MULTI_NO_BOOT) && ARDUINO_MULTI_NO_BOOT < MIN_AVR_BOARD) || (defined(ARDUINO_MULTI_FLASH_FROM_TX) && ARDUINO_MULTI_FLASH_FROM_TX < MIN_AVR_BOARD)
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 AVR Boards.
#endif
//OrangeRX
#if (defined(ARDUINO_MULTI_ORANGERX) && ARDUINO_MULTI_ORANGERX < MIN_ORX_BOARD)
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 AVR Boards.
#endif
//STM32
Add stm32 serial upload method which includes bootloader (#180)
2018-08-10 20:11:32 +01:00
#if (defined(ARDUINO_MULTI_STM32_NO_BOOT) && ARDUINO_MULTI_STM32_NO_BOOT < MIN_STM32_BOARD) || (defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX) && ARDUINO_MULTI_STM32_FLASH_FROM_TX < MIN_STM32_BOARD) || (defined(ARDUINO_MULTI_STM32_WITH_BOOT) && ARDUINO_MULTI_STM32_WITH_BOOT < MIN_STM32_BOARD)
Multi Module Board Definition Updates (#133)
2017-12-20 11:31:20 +00:00
#error You need to update your Multi 4-in-1 board definition. Open Boards Manager and update to the latest version of the Multi 4-in-1 STM32 Board.
#endif
Accomodate new Debug Option setting in Arduino IDE (#255) Thanks, that's perfect!
2019-09-06 13:05:57 +01:00
// Enable serial debugging if a debugging option was chosen in the IDE
#ifdef ARDUINO_MULTI_DEBUG
#define DEBUG_SERIAL
#endif
Add error if CHECK_FOR_BOOTLOADER is not enabled but 'Flash from TX' is Error rather than silently enabling CHECK_FOR_BOOTLOADER.
2017-11-28 10:13:52 +00:00
// Error if CHECK_FOR_BOOTLOADER is not enabled but a FLASH_FROM_TX board is selected
#if (defined(ARDUINO_MULTI_FLASH_FROM_TX) || defined(ARDUINO_MULTI_STM32_FLASH_FROM_TX)) &! defined(CHECK_FOR_BOOTLOADER)
#if defined(STM32_BOARD)
Failsafe
2017-12-07 21:42:23 +01:00
#error "You have selected the 'Flash from TX' upload method but not enabled CHECK_FOR_BOOTLOADER."
#else
#error "You have selected the 'Flash from TX' bootloader but not enabled CHECK_FOR_BOOTLOADER."
#endif
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
#endif
Warn if CHECK_FOR_BOOTLOADER is enabled but a NO_BOOT board is selected Rather than silently disabling CHECK_FOR_BOOTLOADER lets throw an error prompting the user to make the correct selection.
2017-11-28 09:21:03 +00:00
CHECK_FOR_BOOTLOADER now enabled by default in _config.h
2019-08-24 21:50:36 +02:00
// Warning if CHECK_FOR_BOOTLOADER is enabled but no bootloader
Force latest board versions
2018-01-24 10:17:23 +01:00
#if defined(ARDUINO_MULTI_NO_BOOT) && defined(CHECK_FOR_BOOTLOADER)
CHECK_FOR_BOOTLOADER now enabled by default in _config.h
2019-08-24 21:50:36 +02:00
#undef CHECK_FOR_BOOTLOADER
#warning "Disabling CHECK_FOR_BOOTLOADER since no bootloader is selected."
Failsafe
2017-12-07 21:42:23 +01:00
#endif
Introduction of Banks for the switch protocol selection
2018-01-30 12:02:45 +01:00
//Check number of banks
#if NBR_BANKS < 1 || NBR_BANKS > 5
#error "You need to select a number of banks between 1 and 5."
#endif
Failsafe
2017-12-07 21:42:23 +01:00
//Check failsafe throttle value
#ifdef FAILSAFE_ENABLE
#if ( FAILSAFE_THROTTLE_LOW < -125 ) || ( FAILSAFE_THROTTLE_LOW > 125 )
#error "The failsafe value for throttle is outside of the range -125..125."
#endif
AVR Boards: auto bootloader setting
2017-11-20 17:04:38 +01:00
#endif
Add force tuning setting for CC2500 protocols (#124)
2017-12-19 19:14:49 +00:00
// Check forced tuning values are valid
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
//CC2500
#ifdef FORCE_CORONA_TUNING
#if ( FORCE_CORONA_TUNING < -127 ) || ( FORCE_CORONA_TUNING > 127 )
#error "The CORONA forced frequency tuning value is outside of the range -127..127."
#endif
#endif
Add force tuning setting for CC2500 protocols (#124)
2017-12-19 19:14:49 +00:00
#ifdef FORCE_FRSKYD_TUNING
#if ( FORCE_FRSKYD_TUNING < -127 ) || ( FORCE_FRSKYD_TUNING > 127 )
#error "The FrSkyD forced frequency tuning value is outside of the range -127..127."
#endif
#endif
Fix independant protocols build
2020-04-15 01:30:06 +02:00
#ifdef FORCE_FRSKYL_TUNING
#if ( FORCE_FRSKYL_TUNING < -127 ) || ( FORCE_FRSKYL_TUNING > 127 )
#error "The FrSkyL forced frequency tuning value is outside of the range -127..127."
#endif
#endif
Add force tuning setting for CC2500 protocols (#124)
2017-12-19 19:14:49 +00:00
#ifdef FORCE_FRSKYV_TUNING
#if ( FORCE_FRSKYV_TUNING < -127 ) || ( FORCE_FRSKYV_TUNING > 127 )
#error "The FrSkyV forced frequency tuning value is outside of the range -127..127."
#endif
#endif
#ifdef FORCE_FRSKYX_TUNING
#if ( FORCE_FRSKYX_TUNING < -127 ) || ( FORCE_FRSKYX_TUNING > 127 )
#error "The FrSkyX forced frequency tuning value is outside of the range -127..127."
#endif
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#ifdef FORCE_HITEC_TUNING
#if ( FORCE_HITEC_TUNING < -127 ) || ( FORCE_HITEC_TUNING > 127 )
#error "The HITEC forced frequency tuning value is outside of the range -127..127."
New Corona protocol and autobind bug fix
2018-01-03 13:04:58 +01:00
#endif
#endif
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#ifdef FORCE_HOTT_TUNING
#if ( FORCE_HOTT_TUNING < -127 ) || ( FORCE_HOTT_TUNING > 127 )
#error "The HOTT forced frequency tuning value is outside of the range -127..127."
#endif
#endif
New Redpine protocol Protocol Redpine: 50 Sub protocol: Fast=0, Slow=1 Option=freq tunning
2019-06-17 17:16:39 +02:00
#ifdef FORCE_REDPINE_TUNING
#if ( FORCE_REDPINE_TUNING < -127 ) || ( FORCE_REDPINE_TUNING > 127 )
#error "The REDPINE forced frequency tuning value is outside of the range -127..127."
#endif
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#ifdef FORCE_SFHSS_TUNING
#if ( FORCE_SFHSS_TUNING < -127 ) || ( FORCE_SFHSS_TUNING > 127 )
#error "The SFHSS forced frequency tuning value is outside of the range -127..127."
#endif
#endif
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#ifdef FORCE_SKYARTEC_TUNING
#if ( FORCE_SKYARTEC_TUNING < -127 ) || ( FORCE_SKYARTEC_TUNING > 127 )
#error "The SKYARTEC forced frequency tuning value is outside of the range -127..127."
Prep for HoTT protocol and fix STM32 seed
2019-11-02 20:51:41 +01:00
#endif
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
//A7105
#ifdef FORCE_AFHDS2A_TUNING
#if ( FORCE_AFHDS2A_TUNING < -300 ) || ( FORCE_AFHDS2A_TUNING > 300 )
#error "The AFHDS2A forced frequency tuning value is outside of the range -300..300."
#endif
#endif
#ifdef FORCE_BUGS_TUNING
#if ( FORCE_BUGS_TUNING < -300 ) || ( FORCE_BUGS_TUNING > 300 )
#error "The BUGS forced frequency tuning value is outside of the range -300..300."
Hitec: new protocol Hitec protocol using the CC2500 RF component Protocol number: 39 Sub protocols: - Optima (0): the TX must be really close to the RX for the bind negociation to complete. - Minima (1): untested Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
#endif
#endif
A7105 dynamic tuning on channel 15
2018-01-04 14:37:05 +01:00
#ifdef FORCE_FLYSKY_TUNING
#if ( FORCE_FLYSKY_TUNING < -300 ) || ( FORCE_FLYSKY_TUNING > 300 )
#error "The Flysky forced frequency tuning value is outside of the range -300..300."
#endif
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#ifdef FORCE_FLYZONE_TUNING
#if ( FORCE_FLYZONE_TUNING < -300 ) || ( FORCE_FLYZONE_TUNING > 300 )
#error "The Flyzone forced frequency tuning value is outside of the range -300..300."
#endif
#endif
Pelikan protocol fix ?
2019-12-20 15:43:44 +01:00
#ifdef FORCE_PELIKAN_TUNING
#if ( FORCE_PELIKAN_TUNING < -300 ) || ( FORCE_PELIKAN_TUNING > 300 )
#error "The Pelikan forced frequency tuning value is outside of the range -300..300."
#endif
#endif
A7105 dynamic tuning on channel 15
2018-01-04 14:37:05 +01:00
#ifdef FORCE_HUBSAN_TUNING
#if ( FORCE_HUBSAN_TUNING < -300 ) || ( FORCE_HUBSAN_TUNING > 300 )
#error "The Hubsan forced frequency tuning value is outside of the range -300..300."
#endif
#endif
Kyosho: new protocol
2020-07-10 15:25:32 +02:00
#ifdef FORCE_KYOSHO_TUNING
#if ( FORCE_KYOSHO_TUNING < -300 ) || ( FORCE_KYOSHO_TUNING > 300 )
#error "The Kyosho forced frequency tuning value is outside of the range -300..300."
#endif
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
A7105 dynamic tuning on channel 15
2018-01-04 14:37:05 +01:00
#ifndef USE_A7105_CH15_TUNING
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#ifndef FORCE_BUGS_TUNING
#define FORCE_BUGS_TUNING 0
#endif
A7105 dynamic tuning on channel 15
2018-01-04 14:37:05 +01:00
#ifndef FORCE_FLYSKY_TUNING
#define FORCE_FLYSKY_TUNING 0
#endif
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#ifndef FORCE_FLYZONE_TUNING
#define FORCE_FLYZONE_TUNING 0
#endif
Pelikan protocol fix ?
2019-12-20 15:43:44 +01:00
#ifndef FORCE_PELIKAN_TUNING
#define FORCE_PELIKAN_TUNING 0
#endif
Kyosho: new protocol
2020-07-10 15:25:32 +02:00
#ifndef FORCE_KYOSHO_TUNING
#define FORCE_KYOSHO_TUNING 0
#endif
A7105 dynamic tuning on channel 15
2018-01-04 14:37:05 +01:00
#ifndef FORCE_HUBSAN_TUNING
#define FORCE_HUBSAN_TUNING 0
#endif
#ifndef FORCE_AFHDS2A_TUNING
#define FORCE_AFHDS2A_TUNING 0
#endif
#endif
Add force tuning setting for CC2500 protocols (#124)
2017-12-19 19:14:49 +00:00
Fix DSM telemetry and global cyrf6936 freq tunning - Fixed DSM telemetry with some RXs (R720X) - Global frequency tunning for all protocols using the CYRF6936 by adjusting channel 15 when enabled - Changed default DSM_THROTTLE_KILL_CH to use channel 14
2019-08-01 14:23:08 +02:00
#if defined (USE_CYRF6936_CH15_TUNING) && (DSM_THROTTLE_KILL_CH == 15)
#error "Error Channel 15 conflict between the CYRF6936 freq tuning and the DSM throttle kill feature."
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
//Change/Force configuration if OrangeTX
#ifdef ORANGE_TX
#undef ENABLE_PPM // Disable PPM for OrangeTX module
#undef A7105_INSTALLED // Disable A7105 for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef A7105_CSN_pin
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef CC2500_INSTALLED // Disable CC2500 for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef CC25_CSN_pin
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef NRF24L01_INSTALLED // Disable NRF for OrangeTX module
Fix Multi OrangeTX build
2017-02-21 00:29:40 +01:00
#undef NRF_CSN_pin
Multi 5-in-1 initial support
2020-06-06 01:57:52 +02:00
#undef SX1276_INSTALLED // Disable SX1276 for OrangeTX module
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#define TELEMETRY // Enable telemetry
#define INVERT_TELEMETRY // Enable invert telemetry
#define DSM_TELEMETRY // Enable DSM telemetry
#endif
Multi 5-in-1 initial support
2020-06-06 01:57:52 +02:00
//Change/Force RF chip configuration if MULTI_5IN1_INTERNAL
#ifdef MULTI_5IN1_INTERNAL
#if not defined(STM32_BOARD)
#error "Error MULTI_5IN1_INTERNAL is only for STM32 boards."
#endif
#define A7105_INSTALLED
#define CYRF6936_INSTALLED
#define CC2500_INSTALLED
#define NRF24L01_INSTALLED
#define SX1276_INSTALLED
FrSkyR9: fix independant compilation issue
2020-07-04 11:48:26 +02:00
#undef ENABLE_PPM
Multi 5-in-1 initial support
2020-06-06 01:57:52 +02:00
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
//Make sure protocols are selected correctly
#ifndef A7105_INSTALLED
Fixed compilation issues due to AFHDS2A introduction
2016-10-20 21:55:02 +02:00
#undef AFHDS2A_A7105_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef AFHDS2A_RX_A7105_INO
BUGS new protocol BUGS new protocol (number 41) Models: Bugs 3, 6 and 8 Autobind protocol Telemetry: TX & RX RSSI, Battery voltage good/bad ARM CH5 LED CH6 FLIP CH7 PICTURE CH8 VIDEO CH9
2018-08-28 16:13:28 +02:00
#undef BUGS_A7105_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef FLYSKY_A7105_INO
New protocol: Flyzone Models compatible with TX FZ-410 Protocol 53 No sub protocol
2019-08-17 22:37:00 +02:00
#undef FLYZONE_A7105_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef HUBSAN_A7105_INO
Kyosho: new protocol
2020-07-10 15:25:32 +02:00
#undef KYOSHO_A7105_INO
New Pelikan protocol Protocol number: 60 No sub proto 8 channels AETR... Extended limit supported !!Only 1 ID for now!!
2019-12-19 22:39:01 +01:00
#undef PELIKAN_A7105_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#ifndef CYRF6936_INSTALLED
#undef DEVO_CYRF6936_INO
#undef DSM_CYRF6936_INO
New DSM RX protocol
2020-05-17 15:45:23 +02:00
#undef DSM_RX_CYRF6936_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef J6PRO_CYRF6936_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef TRAXXAS_CYRF6936_INO
New protocol WFLY (40) Use the CYRF6936 RF component Extended limit supported No sub protocol option=number of channels between 4 and 9. If outside of the range default=9.
2018-08-21 14:58:44 +02:00
#undef WFLY_CYRF6936_INO
New protocol WK2x01 Protocol WK2x01 number 30 Sub protocols: - WK2801 number 0, 8 channels, fixed id not supported - WK2601 number 1, 6/7 channels, option is used see doc for details - WK2401 number 2, 4 channels Extended limits supported Autobind protocol Most receivers support WK2801 so always start trying this sub protocol first.
2017-01-03 19:19:53 +01:00
#undef WK2x01_CYRF6936_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#ifndef CC2500_INSTALLED
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef CORONA_CC2500_INO
New protocol eSky 150 v2 Protocol: 69 No sub protocol No extended limit RX outputs is be set automatically to the eSky default TAER 16 channels
2020-05-08 19:55:16 +02:00
#undef ESKY150V2_CC2500_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef FRSKYD_CC2500_INO
New protocol FrSkyL: LR12 Model: L9R RX 2 sub protocols: LR12 and LR12_6CH
2020-04-11 20:09:32 +02:00
#undef FRSKYL_CC2500_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef FRSKYV_CC2500_INO
#undef FRSKYX_CC2500_INO
Protocol FrSkyD (D8) receiver (#283) * Rename FrSkyX Rx to FrSky Rx * Rename protocol * Add D8 receiver sub protocol
2019-10-12 19:50:11 +02:00
#undef FRSKY_RX_CC2500_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef HITEC_CC2500_INO
Prep for HoTT protocol and fix STM32 seed
2019-11-02 20:51:41 +01:00
#undef HOTT_CC2500_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef REDPINE_CC2500_INO
RadioLink Surface protocol: initial commit
2020-07-22 15:37:47 +02:00
#undef RLINK_CC2500_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef SCANNER_CC2500_INO
#undef SFHSS_CC2500_INO
#undef SKYARTEC_CC2500_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#ifndef NRF24L01_INSTALLED
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef ASSAN_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef BAYANG_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef BAYANG_RX_NRF24L01_INO
#undef BUGSMINI_NRF24L01_INO
#undef CABELL_NRF24L01_INO
#undef CFLIE_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef CG023_NRF24L01_INO
#undef CX10_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef DM002_NRF24L01_INO
#undef E01X_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef ESKY_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef ESKY150_NRF24L01_INO
New protocol eSky 150 v2 Protocol: 69 No sub protocol No extended limit RX outputs is be set automatically to the eSky default TAER 16 channels
2020-05-08 19:55:16 +02:00
#undef ESKY150V2_CC2500_INO // Use both CC2500 and NRF code
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef FQ777_NRF24L01_INO
#undef FX816_NRF24L01_INO
#undef FY326_NRF24L01_INO
#undef GD00X_NRF24L01_INO
#undef GW008_NRF24L01_INO
#undef H8_3D_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef HISKY_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef HONTAI_NRF24L01_INO
New protocol JJRC345: WIP Work in progress
2020-05-21 11:47:51 +02:00
#undef JJRC345_NRF24L01_INO
New protocol KF606 Model: KF606 Protocol: 49 No sub protocol Channels: throttle, aileron and trim on ch5
2019-06-04 21:44:40 +02:00
#undef KF606_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef KN_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef MJXQ_NRF24L01_INO
#undef MT99XX_NRF24L01_INO
#undef NCC1701_NRF24L01_INO
#undef POTENSIC_NRF24L01_INO
#undef PROPEL_NRF24L01_INO
#undef Q303_NRF24L01_INO
New protocol Q90C
2020-05-24 17:39:14 +02:00
#undef Q90C_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef SHENQI_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef SLT_NRF24L01_INO
#undef SYMAX_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef TIGER_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef V2X2_NRF24L01_INO
New protocol V761 Protocol number: 48 Sub_protocol: none Channel 5: +100% expert, 0% mid=gyro on no rate limits, -100% beginer=gyro on and axis rate limited. ONLY 1 ID IS AVAILABLE SO BE CAREFUL WHILE FLYING.
2019-05-17 16:25:39 +02:00
#undef V761_NRF24L01_INO
V911S protocol Protocol number 46 No sub protocol CH5: yaw calib
2018-11-09 00:31:26 +01:00
#undef V911S_NRF24L01_INO
New protocol XK Still work in progress Subprotocols: X450 and X420 -> not sure if they are subprotocols or just different IDs... CH5: M-Mode=-100%, 6G-Mode=0%, V-Mode=+100% CH6: Take off momentary switch CH7: Emergency stop momentary switch CH8: 3D/6G momentary switch CH9: Photo momentary switch
2020-01-14 12:19:12 +01:00
#undef XK_NRF24L01_INO
New protocol: Skyartec
2020-04-18 19:04:38 +02:00
#undef YD717_NRF24L01_INO
#undef ZSX_NRF24L01_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
FrskyR9 protocol
2020-01-24 12:12:07 +01:00
#if not defined(STM32_BOARD)
#undef SX1276_INSTALLED
#endif
#ifndef SX1276_INSTALLED
#undef FRSKYR9_SX1276_INO
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
Multi_Names update for OpenTX
2020-04-16 17:03:17 +02:00
//OpenTX 2.3.x issue
#if defined (FRSKYD_CC2500_INO) || defined(FRSKYV_CC2500_INO) || defined(FRSKYX_CC2500_INO)
#define FRSKYX_CC2500_INO
#define FRSKY_RX_CC2500_INO
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
//Make sure telemetry is selected correctly
#ifndef TELEMETRY
#undef INVERT_TELEMETRY
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#undef AFHDS2A_FW_TELEMETRY
#undef AFHDS2A_HUB_TELEMETRY
Hitec: new protocol Hitec protocol using the CC2500 RF component Protocol number: 39 Sub protocols: - Optima (0): the TX must be really close to the RX for the bind negociation to complete. - Minima (1): untested Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
#undef HITEC_FW_TELEMETRY
#undef HITEC_HUB_TELEMETRY
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#undef BAYANG_HUB_TELEMETRY
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#undef CABELL_HUB_TELEMETRY
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#undef HUBSAN_HUB_TELEMETRY
BUGS new protocol BUGS new protocol (number 41) Models: Bugs 3, 6 and 8 Autobind protocol Telemetry: TX & RX RSSI, Battery voltage good/bad ARM CH5 LED CH6 FLIP CH7 PICTURE CH8 VIDEO CH9
2018-08-28 16:13:28 +02:00
#undef BUGS_HUB_TELEMETRY
Protocol NCC1701 CH5: Warp Telemetry: A1 voltage is used for crash detection. In case of a crash A1=0V. You can be assign a sound to the crash.
2018-11-03 17:24:47 +01:00
#undef NCC1701_HUB_TELEMETRY
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef HUB_TELEMETRY
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
#undef SPORT_TELEMETRY
Code cleanup
2019-09-30 20:53:10 +02:00
#undef SPORT_SEND
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
#undef DSM_TELEMETRY
Removed board option in _config.h
2017-02-06 21:50:56 +01:00
#undef MULTI_STATUS
MULTI_TELEMETRY: couple of additions
2016-12-19 17:33:30 +01:00
#undef MULTI_TELEMETRY
Scanner 2.4GHz Thanks to Goebish for this spectrum analyzer. It will work soon with the OpenTX 2.3 Spectrum Analyser tool.
2019-09-10 23:37:54 +02:00
#undef SCANNER_TELEMETRY
Update Validate.h
2019-09-17 09:53:18 +02:00
#undef SCANNER_CC2500_INO
Protocol FrSkyD (D8) receiver (#283) * Rename FrSkyX Rx to FrSky Rx * Rename protocol * Add D8 receiver sub protocol
2019-10-12 19:50:11 +02:00
#undef FRSKY_RX_TELEMETRY
#undef FRSKY_RX_CC2500_INO
Protocol Flysky AFHDS2A receiver (#275) * Add skeleton for AFHDS2A receiver protocol * Bind & data Ok * Send channels to TX via telemetry * Add RSSI * Fix AVR compilation * Fix channel number
2019-10-01 20:44:26 +02:00
#undef AFHDS2A_RX_TELEMETRY
#undef AFHDS2A_RX_A7105_INO
HoTT telem
2019-11-05 00:31:20 +01:00
#undef HOTT_FW_TELEMETRY
Add skeleton for Bayang RX protocol
2019-11-28 20:02:59 +01:00
#undef BAYANG_RX_TELEMETRY
#undef BAYANG_RX_NRF24L01_INO
Devo basic telemetry
2020-05-09 16:11:10 +02:00
#undef DEVO_HUB_TELEMETRY
Fix compilation when telemetry is disabled
2020-06-09 20:08:00 +02:00
#undef PROPEL_HUB_TELEMETRY
RadioLink Surface protocol: initial commit
2020-07-22 15:37:47 +02:00
#undef RLINK_HUB_TELEMETRY
New DSM RX protocol
2020-05-17 15:45:23 +02:00
#undef DSM_RX_CYRF6936_INO
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#else
Update Validate.h
2019-09-17 09:53:18 +02:00
#if defined(MULTI_TELEMETRY) && defined(MULTI_STATUS)
#error You should choose either MULTI_TELEMETRY or MULTI_STATUS but not both.
Removed board option in _config.h
2017-02-06 21:50:56 +01:00
#endif
Update Validate.h
2019-09-17 09:53:18 +02:00
#if not defined(SCANNER_CC2500_INO) || not defined(SCANNER_TELEMETRY)
Fix scanner compilation issue
2019-09-11 12:23:36 +02:00
#undef SCANNER_TELEMETRY
Update Validate.h
2019-09-17 09:53:18 +02:00
#undef SCANNER_CC2500_INO
Fix scanner compilation issue
2019-09-11 12:23:36 +02:00
#endif
Protocol FrSkyD (D8) receiver (#283) * Rename FrSkyX Rx to FrSky Rx * Rename protocol * Add D8 receiver sub protocol
2019-10-12 19:50:11 +02:00
#if not defined(FRSKY_RX_CC2500_INO) || not defined(FRSKY_RX_TELEMETRY)
#undef FRSKY_RX_TELEMETRY
#undef FRSKY_RX_CC2500_INO
Protocol FrSky D16 receiver (#266) * Add skeleton for FrSkyX receiver protocol * Binds & receives data packets * Store bind information * Fix compilation * Bypass LNA since intended usage implies tx & rx are close together * Bind channel has FS_AUTOCAL * Add freq fine tune & low power mode (disable lna) * Add TX ID check * Retry longer until first packet is catched * Fix chanskip for first packet * Fix defines * Fix bind * Send channels to TX * Fix RSSI reading * Add missing static keyword * Fix Validate.h * Fix compilation
2019-09-17 23:35:19 +02:00
#endif
Protocol Flysky AFHDS2A receiver (#275) * Add skeleton for AFHDS2A receiver protocol * Bind & data Ok * Send channels to TX via telemetry * Add RSSI * Fix AVR compilation * Fix channel number
2019-10-01 20:44:26 +02:00
#if not defined(AFHDS2A_RX_A7105_INO) || not defined(AFHDS2A_RX_TELEMETRY)
#undef AFHDS2A_RX_TELEMETRY
#undef AFHDS2A_RX_A7105_INO
#endif
Add skeleton for Bayang RX protocol
2019-11-28 20:02:59 +01:00
#if not defined(BAYANG_RX_NRF24L01_INO) || not defined(BAYANG_RX_TELEMETRY)
#undef BAYANG_RX_TELEMETRY
#undef BAYANG_RX_NRF24L01_INO
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(BAYANG_NRF24L01_INO)
#undef BAYANG_HUB_TELEMETRY
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
Devo basic telemetry
2020-05-09 16:11:10 +02:00
#if not defined(DEVO_CYRF6936_INO)
#undef DEVO_HUB_TELEMETRY
#endif
Fix compilation when telemetry is disabled
2020-06-09 20:08:00 +02:00
#if not defined(PROPEL_NRF24L01_INO)
#undef PROPEL_HUB_TELEMETRY
#endif
Protocol NCC1701 CH5: Warp Telemetry: A1 voltage is used for crash detection. In case of a crash A1=0V. You can be assign a sound to the crash.
2018-11-03 17:24:47 +01:00
#if not defined(NCC1701_NRF24L01_INO)
#undef NCC1701_HUB_TELEMETRY
#endif
Protocol FrSky D16 receiver (#266) * Add skeleton for FrSkyX receiver protocol * Binds & receives data packets * Store bind information * Fix compilation * Bypass LNA since intended usage implies tx & rx are close together * Bind channel has FS_AUTOCAL * Add freq fine tune & low power mode (disable lna) * Add TX ID check * Retry longer until first packet is catched * Fix chanskip for first packet * Fix defines * Fix bind * Send channels to TX * Fix RSSI reading * Add missing static keyword * Fix Validate.h * Fix compilation
2019-09-17 23:35:19 +02:00
#if not defined(BUGS_A7105_INO) && not defined(BUGSMINI_NRF24L01_INO)
New protocol BUGSMINI Models: MJX Bugs 3 Mini and 3H Protocol BUGSMINI = 42 No sub_protocol Telemetry = RX RSSI and battery voltage good/warning/bad RX_Num is used to give a number to a given model. You must use a different RX_Num per MJX Bugs Mini. A maximum of 16 Bugs Mini are supported. Channels: ARM CH5 ANGLE CH6 FLIP CH7 PICTURE CH8 VIDEO CH9 LED CH10
2018-10-17 13:23:27 +02:00
#undef BUGS_HUB_TELEMETRY
#endif
New CABELL protocol Protocol number: 34 sub_protocols: 0 CABELL_V3 1 CABELL_V3_TELEMETRY 6 CABELL_SET_FAIL_SAFE 7 CABELL_UNBIND
2017-11-23 18:44:31 +01:00
#if not defined(CABELL_NRF24L01_INO)
#undef CABELL_HUB_TELEMETRY
#endif
RadioLink Surface protocol: initial commit
2020-07-22 15:37:47 +02:00
#if not defined(RLINK_CC2500_INO)
#undef RLINK_HUB_TELEMETRY
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(HUBSAN_A7105_INO)
#undef HUBSAN_HUB_TELEMETRY
#endif
#if not defined(AFHDS2A_A7105_INO)
#undef AFHDS2A_HUB_TELEMETRY
#undef AFHDS2A_FW_TELEMETRY
#endif
Hitec: new protocol Hitec protocol using the CC2500 RF component Protocol number: 39 Sub protocols: - Optima (0): the TX must be really close to the RX for the bind negociation to complete. - Minima (1): untested Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
#if not defined(HITEC_CC2500_INO)
#undef HITEC_HUB_TELEMETRY
#undef HITEC_FW_TELEMETRY
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(FRSKYD_CC2500_INO)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef HUB_TELEMETRY
#endif
FrSkyR9: initial telemetry support
2020-07-03 19:51:11 +02:00
#if not defined(FRSKYX_CC2500_INO) && not defined(FRSKYR9_SX1276_INO)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef SPORT_TELEMETRY
Code cleanup
2019-09-30 20:53:10 +02:00
#undef SPORT_SEND
Hitec: new protocol Hitec protocol using the CC2500 RF component Protocol number: 39 Sub protocols: - Optima (0): the TX must be really close to the RX for the bind negociation to complete. - Minima (1): untested Optima supports basic telemetry using the FrSky Hub format: RX volt, TX RSSI,&LQI
2018-08-03 18:29:24 +02:00
#endif
Code cleanup
2019-09-30 20:53:10 +02:00
#if not defined (SPORT_TELEMETRY)
#undef SPORT_SEND
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
Added: Bayang telemetry Changed telemetry configuration and validation for AFHDS2A and HUBSAN Added default Bayang telemetry from Silverxxx: - Option=1 to activate telemetry (option=0 -> standard Bayang protocol) - Value returned to the TX: RX RSSI, TX RSSI, A1=uncompensated battery voltage, A2=compensated battery voltage
2016-12-06 22:30:48 +01:00
#if not defined(DSM_CYRF6936_INO)
#undef DSM_TELEMETRY
AFHDS2A sub protocols and validation
2016-11-06 16:36:44 +01:00
#endif
HoTT telem
2019-11-05 00:31:20 +01:00
#if not defined(HOTT_CC2500_INO)
#undef HOTT_FW_TELEMETRY
#endif
RadioLink Surface protocol: initial commit
2020-07-22 15:37:47 +02:00
#if not defined(HOTT_FW_TELEMETRY) && not defined(DSM_TELEMETRY) && not defined(SPORT_TELEMETRY) && not defined(HUB_TELEMETRY) && not defined(HUBSAN_HUB_TELEMETRY) && not defined(BUGS_HUB_TELEMETRY) && not defined(NCC1701_HUB_TELEMETRY) && not defined(BAYANG_HUB_TELEMETRY) && not defined(CABELL_HUB_TELEMETRY) && not defined(RLINK_HUB_TELEMETRY) && not defined(AFHDS2A_HUB_TELEMETRY) && not defined(AFHDS2A_FW_TELEMETRY) && not defined(MULTI_TELEMETRY) && not defined(MULTI_STATUS) && not defined(HITEC_HUB_TELEMETRY) && not defined(HITEC_FW_TELEMETRY) && not defined(SCANNER_TELEMETRY) && not defined(FRSKY_RX_TELEMETRY) && not defined(AFHDS2A_RX_TELEMETRY) && not defined(BAYANG_RX_TELEMETRY) && not defined(DEVO_HUB_TELEMETRY) && not defined(PROPEL_HUB_TELEMETRY)
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#undef TELEMETRY
#undef INVERT_TELEMETRY
Fix all compilation issues (?)
2019-11-11 19:15:39 +01:00
#undef MULTI_TELEMETRY
#undef MULTI_STATUS
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
#endif
Sync radio -> module
2019-10-10 23:12:09 +02:00
#ifdef SPORT_TELEMETRY
#define SPORT_SEND
#endif
Fix all compilation issues (?)
2019-11-11 19:15:39 +01:00
#if not defined(STM32_BOARD)
#undef MULTI_SYNC
#endif
Send current protocol and sub protocol name
2019-10-15 02:04:19 +02:00
#if not defined(MULTI_TELEMETRY)
Fix all compilation issues (?)
2019-11-11 19:15:39 +01:00
#undef MULTI_SYNC
Send current protocol and sub protocol name
2019-10-15 02:04:19 +02:00
#undef MULTI_NAMES
XN297EMU: option=0->nrf24L01, option!=0 -> CC2500 XN297L@250kbps is emulated by default with the NRF24L01. If option (freq tune) is diffrent from 0, the CC2500 module (if installed) will be used instead with option being the freq usual tuning.
2020-01-12 14:06:27 +01:00
#else
Multi_names mandatory when using multi_telemetry Validate that sub_proto is valid for the current protocol Validate that disable channel mapping is valid for the current protocol
2019-11-29 18:50:57 +01:00
#define MULTI_NAMES
#endif
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
//Make sure TX is defined correctly
#ifndef AILERON
#error You must select a correct channel order.
#endif
Removed PPM 125% statements
2018-01-09 09:04:55 +01:00
#if not defined(PPM_MAX_100) || not defined(PPM_MIN_100)
#error You must set correct PPM end points for your TX.
STM32 board & DSM fixes Loads of changes: STM32 board introduction: NOT TESTED XMEGA renamed to ORANGE_TX to be more explicit DSM: added reset if cyrf freezed Validate: added a validate file to verify the different compilation options
2016-10-16 19:51:42 +02:00
#endif
Bind channel: configurable channel number Bind channel can be configured between 5 and 16.
2017-01-02 17:26:35 +01:00
#if defined(ENABLE_BIND_CH)
#if BIND_CH<4
#error BIND_CH must be above 4.
#endif
#if BIND_CH>16
#error BIND_CH must be below or equal to 16.
#endif
#endif
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
DSM: Throttle Kill option
2018-11-20 16:54:55 +01:00
#if defined(DSM_THROTTLE_KILL_CH)
#if DSM_THROTTLE_KILL_CH<4
#error DSM_THROTTLE_KILL_CH must be above 4.
#endif
#if DSM_THROTTLE_KILL_CH>16
#error DSM_THROTTLE_KILL_CH must be below or equal to 16.
#endif
#endif
AFHDS2A: LQI to RX channel
2018-11-20 21:04:29 +01:00
#if defined(AFHDS2A_LQI_CH)
#if AFHDS2A_LQI_CH<4
#error AFHDS2A_LQI_CH must be above 4.
#endif
#if AFHDS2A_LQI_CH>14
#error AFHDS2A_LQI_CH must be below or equal to 14.
#endif
#endif
PPM: add MIN_PPM_CHANNELS and MAX_PPM_CHANNELS
2017-02-28 10:36:35 +01:00
#if MIN_PPM_CHANNELS>16
#error MIN_PPM_CHANNELS must be below or equal to 16. The default for this value is 4.
#endif
#if MIN_PPM_CHANNELS<2
#error MIN_PPM_CHANNELS must be larger than 1. The default for this value is 4.
#endif
#if MAX_PPM_CHANNELS<MIN_PPM_CHANNELS
#error MAX_PPM_CHANNELS must be higher than MIN_PPM_CHANNELS. The default for this value is 16.
#endif
#if MAX_PPM_CHANNELS>16
#error MAX_PPM_CHANNELS must be below or equal to 16. The default for this value is 16.
Update Validate.h (#119) Add `#undef` for new esky150 and H8_3D protocols if `NRF24L01_INSTALLED` is not defined.
2017-12-07 14:40:59 +00:00
#endif
Add XN297 Dump protocol Protocol number: 63 Sub protocols: 0=250Kb, 1=1Mb, 2=2Mb Option: -1=scan RF channels, 0-84=RF channel DEBUG_SERIAL must be enabled If a valid frame is received the frame will be sent on the serial port.
2019-05-08 22:01:24 +02:00
#if defined (STM32_BOARD) && defined (DEBUG_SERIAL) && defined (NRF24L01_INSTALLED)
#define XN297DUMP_NRF24L01_INO
#endif
code cleanup
2019-12-30 15:44:16 -06:00
//Check if Direct inputs defined correctly
#if defined (ENABLE_DIRECT_INPUTS)
#if not defined (STM32_BOARD) || not defined (ENABLE_PPM) || defined (ENABLE_SERIAL)
#error You can enable dirct inputs only in PPM mode and only for STM32 board.
#endif
#if not defined (DI1_PIN) && not defined (DI2_PIN) && not defined (DI3_PIN) && not defined (DI4_PIN)
#error You must define at least 1 direct input pin or undefine ENABLE_DIRECT_INPUTS in config.
#endif
#if not defined (DI_CH1_read) && not defined (DI_CH2_read) && not defined (DI_CH3_read) && not defined (DI_CH4_read)
#error You must define at least 1 direct input chanell read macros or undefine ENABLE_DIRECT_INPUTS in config.
#endif
XN297EMU: option=0->nrf24L01, option!=0 -> CC2500 XN297L@250kbps is emulated by default with the NRF24L01. If option (freq tune) is diffrent from 0, the CC2500 module (if installed) will be used instead with option being the freq usual tuning.
2020-01-12 14:06:27 +01:00
#endif
Reference in New Issue Copy Permalink