DIY-Multiprotocol-TX-Module/buildroot/bin/build_release_stm32f1_no_debug

#!/usr/bin/env bash

source ./buildroot/bin/buildFunctions;
exitcode=0;

# Builds for the DIY 5-in-1 module exceed the 120KB working capacity of the STM32F103CB
# To work around this we have to disable some protocols in the builds for this module
DIY_5IN1_DISABLED="MOULDKG_NRF24L01_INO";

# Generic 4-in-1 builds
printf "\e[33;1mBuilding mm-stm-serial-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_disable ENABLE_PPM;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-serial-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-serial-reta-v$MULTI_VERSION.bin;

# DIY 5-in-1 builds
printf "\e[33;1mBuilding mm-stm-5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_disable $DIY_5IN1_DISABLED;
opt_enable SX1276_INSTALLED;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-5in1-reta-v$MULTI_VERSION.bin;

# T-Lite 5-in-1 builds
printf "\e[33;1mBuilding mm-tlite5in1-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_disable INVERT_TELEMETRY;
opt_disable SX1276_INSTALLED;
opt_enable $DIY_5IN1_DISABLED;
opt_enable "MULTI_5IN1_INTERNAL JP_TLite"
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-tlite5in1-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-tlite5in1-reta-v$MULTI_VERSION.bin;

# CC2500-only builds
printf "\e[33;1mBuilding mm-stm-cc2500-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_replace RETA AETR;
opt_disable "MULTI_5IN1_INTERNAL JP_TLite"
opt_disable A7105_INSTALLED;
opt_disable CYRF6936_INSTALLED;
opt_disable NRF24L01_INSTALLED;
opt_disable INVERT_TELEMETRY;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-cc2500-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-cc2500-reta-v$MULTI_VERSION.bin;

# 4-in-1 PPM builds
printf "\e[33;1mBuilding mm-stm-ppm-aetr-v$MULTI_VERSION.bin\e[0m\n";
opt_enable A7105_INSTALLED;
opt_enable CYRF6936_INSTALLED;
opt_enable NRF24L01_INSTALLED;
opt_enable ENABLE_PPM;
opt_disable ENABLE_SERIAL;
opt_replace RETA AETR;
opt_disable MULTI_STATUS;
opt_disable MULTI_TELEMETRY;
opt_set NBR_BANKS 5;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-aetr-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-ppm-taer-v$MULTI_VERSION.bin\e[0m\n";
opt_replace AETR TAER;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-taer-v$MULTI_VERSION.bin;

printf "\e[33;1mBuilding mm-stm-ppm-reta-v$MULTI_VERSION.bin\e[0m\n";
opt_replace TAER RETA;
buildMulti;
exitcode=$((exitcode+$?));
mv build/Multiprotocol.ino.bin ./binaries/mm-stm-ppm-reta-v$MULTI_VERSION.bin; 

exit $exitcode;